PHONIC PAA-3 AUDIO ANALYZER w-USB

Discontinued

393.17 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Handheld Audio Analyzer with USB Interface Built-in calibrated measurement microphone 1/3 octave real-time analyzer 31-band EQ setting value display (boost/cut) RT60 measurement Phase checker Noise generator with pink noise, 1kHz and polarity test signal, balanced output Memory and average calculation function SPL meter calibration through sound level calibrator Sound Pressure Level Meter from 30 dB~130 […]

 

Read more

Handheld Audio Analyzer with USB Interface
  • Built-in calibrated measurement microphone
  • 1/3 octave real-time analyzer
  • 31-band EQ setting value display (boost/cut)
  • RT60 measurement
  • Phase checker
  • Noise generator with pink noise, 1kHz and polarity test signal, balanced output
  • Memory and average calculation function
  • SPL meter calibration through sound level calibrator
  • Sound Pressure Level Meter from 30 dB~130 dB
  • Line signal measurement display in dBu, dBV, or Volts (AC)
  • SPL meter and level meter have three level range selections
  • Maximum level, Peak hold displays
  • XLR input and output sockets
  • USB interface for desktop software control
  • Audio test signal CD and supporting software
  • Three power modes: (1) Power Save (2) On (3) Off
  • Operates seven hours with four AA batteries
  • AC power adapter included
Weight 0.55 kg

Reviews

There are no reviews yet.

Be the first to review “PHONIC PAA-3 AUDIO ANALYZER w-USB”

Your email address will not be published. Required fields are marked *

Quick Comparison

PHONIC PAA-3 AUDIO ANALYZER w-USB removeARTSOUND A8862 LASERGRIP THERMOMETER removeDIGITAL SOUND 8928 Sound dB meter removeBEHRINGER CT-100 CABLE TESTER removeARTLIGHT TE808 LASERGRIP THERMOMETER PORTABLE BODY & OBJECT THERMOMETER removeDAP AUDIO D1907 Cable Tester remove
NamePHONIC PAA-3 AUDIO ANALYZER w-USB removeARTSOUND A8862 LASERGRIP THERMOMETER removeDIGITAL SOUND 8928 Sound dB meter removeBEHRINGER CT-100 CABLE TESTER removeARTLIGHT TE808 LASERGRIP THERMOMETER PORTABLE BODY & OBJECT THERMOMETER removeDAP AUDIO D1907 Cable Tester remove
Image
SKUH02PH00033A88628928E005950TE808D1907
Rating
Price 393.17 incl. GR VAT39.78 incl. GR VAT93.00 incl. GR VAT 32.00 incl. GR VAT 14.25 incl. GR VAT 80.59 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

Available on backorder

In stock

In stock

AvailabilityOut of stockAvailable on backorderIn stockAvailable on backorderIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentHandheld Audio Analyzer with USB Interface
  • Built-in calibrated measurement microphone
  • 1/3 octave real-time analyzer
  • 31-band EQ setting value display (boost/cut)
  • RT60 measurement
  • Phase checker
  • Noise generator with pink noise, 1kHz and polarity test signal, balanced output
  • Memory and average calculation function
  • SPL meter calibration through sound level calibrator
  • Sound Pressure Level Meter from 30 dB~130 dB
  • Line signal measurement display in dBu, dBV, or Volts (AC)
  • SPL meter and level meter have three level range selections
  • Maximum level, Peak hold displays
  • XLR input and output sockets
  • USB interface for desktop software control
  • Audio test signal CD and supporting software
  • Three power modes: (1) Power Save (2) On (3) Off
  • Operates seven hours with four AA batteries
  • AC power adapter included

 ARTSOUND A8862 LASERGRIP THERMOMETER

Temperature range: -32 C - 550 C
Accuracy: 1,5%
Power supply: 9V
Weight: 258gr

Digital Sound 8928 SPL Meter with Built-In Measurement Mic - calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery. A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret condenser microphone giving virtually instant readings updated every 0.5 seconds on an extra large LCD display.
  • 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
  • 0.1dB resolution updated every 0.5 seconds
  • Auto ranging or manual range selection
  • ʽAʼ & ʽCʼ frequency weighting
  • Fast or slow response filters
  • 42mm LCD display with quasi-analogue bargraph and function Indicators
  • Bargraph in 1dB steps updated every 40ms
  • Max hold function to display the highest recorded value
  • Min/max memory since power on or last reset
  • Low battery indicator
  • Auto power off
  • Analogue output AC: 0.707 Vrms (at full scale)
  • Supplied with battery
Tests XLR, 1/4 in., 1/8 in., TT, RCA and MIDI connectors. The intelligent, CPU-controlled CT100 accepts virtually any connector type: XLR, mono and TRS phone (1/4 in., 1/8 in., TT), RCA and MIDI. It shows which input pin is connected to which output pin. Separate LEDs indicate proper shield connection and phantom power presence. The CT100 also offers an installed cable test mode and a continuity check plus a test tone generator. Features 3 modes: cable test mode, installed cable test mode, and test tone mode Accepts XLR, mono and stereo TRS phone (1/4 in., 1/8 in., TT), RCA and MIDI Connectors Continuity check Intermittent detect Phantom power detect Grounded shield detect Test tone generation (1 kHz and 440 Hz) Battery operation (requires 2 AA alkaline batteries)

Infrared thermometer introduction: ①fever reminder, guard your baby\'s health ②Infrared temperature measurement technology Avoid contact with baby skin and spread bacteria ③Large back lit display (multi-parameter display) ④50 groups of memory functions °C/°F switching function / low battery reminder function ⑤2 temperature measurement mode Object temperature, body temperature measurement mode switch, 3-color back light display different temperature display different colors. ⑥Measurement result reminder: At the end of the measurement, the speaker will make a sound, prompting to complete the measurement. ⑦Precision temperature probe German precision probes ensure accurate temperature measurement ⑧Low power consumption, energy saving and envirronmental protection Powerred by 2 AAA batteries, no measurement 30 S automatic shutdown.

Display: LCD Digital

Way of working: Infrared

Alarm function: Three-color alarm

Operating mode: Human body and objects

shape: Handheld Gun shape

Battery voltage: DC 3 V (2 AAA alkaline batteries)

Measuring range: 34.0 ℃ ~ 43.0 ℃

Measurement accuracy: 42.0 ℃: ± 0.3 ℃ 35.0 ° C to 42.0 ° C: ± 0.2 ° C

Measuring distance: 5 ~ 15 cm

Measurement interval: about 6 seconds

Three-color back light Surface temperature mode:

Below 37.5 ℃ is green

37.6 ° C to 38.0 ° C is yellow

38.1 ℃ above is red

Automatic shutdown: ≦ 20 seconds

Storage: -20 ℃ ~ 45 ℃, relative humidity: ≦ 85%

This is an on-the-road tool you certainly can't miss in your gearbox! A nifty, handy cabletester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED's. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuit check with a red LED and audio-warningsignal is also included. On the left and right side you'll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® Speakon®.

Weight0.55 kg0.30 kg0.50 kg1.00 kg0.20 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.55 kg
Weight 0.30 kg
Weight 0.50 kg
Weight 1.00 kg
Weight 0.20 kg
Weight 1.00 kg