PHONIC PAA-3 AUDIO ANALYZER w-USB

Discontinued

393.17 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Handheld Audio Analyzer with USB Interface Built-in calibrated measurement microphone 1/3 octave real-time analyzer 31-band EQ setting value display (boost/cut) RT60 measurement Phase checker Noise generator with pink noise, 1kHz and polarity test signal, balanced output Memory and average calculation function SPL meter calibration through sound level calibrator Sound Pressure Level Meter from 30 dB~130 […]

 

Read more

Handheld Audio Analyzer with USB Interface
  • Built-in calibrated measurement microphone
  • 1/3 octave real-time analyzer
  • 31-band EQ setting value display (boost/cut)
  • RT60 measurement
  • Phase checker
  • Noise generator with pink noise, 1kHz and polarity test signal, balanced output
  • Memory and average calculation function
  • SPL meter calibration through sound level calibrator
  • Sound Pressure Level Meter from 30 dB~130 dB
  • Line signal measurement display in dBu, dBV, or Volts (AC)
  • SPL meter and level meter have three level range selections
  • Maximum level, Peak hold displays
  • XLR input and output sockets
  • USB interface for desktop software control
  • Audio test signal CD and supporting software
  • Three power modes: (1) Power Save (2) On (3) Off
  • Operates seven hours with four AA batteries
  • AC power adapter included
Weight 0.55 kg

Reviews

There are no reviews yet.

Be the first to review “PHONIC PAA-3 AUDIO ANALYZER w-USB”

Your email address will not be published. Required fields are marked *

Quick Comparison

PHONIC PAA-3 AUDIO ANALYZER w-USB removeALPHATON ACT-100 CABLE TESTER removeNT-INSTRUMENTS Digilyzer DL1 Digital audio analyzer-audio meter removeNT-INSTRUMENTS MINILYZER analog audio analyzer-audio meter removeBEHRINGER CT-100 CABLE TESTER removeTOA ZM-104 Impedance Meter remove
NamePHONIC PAA-3 AUDIO ANALYZER w-USB removeALPHATON ACT-100 CABLE TESTER removeNT-INSTRUMENTS Digilyzer DL1 Digital audio analyzer-audio meter removeNT-INSTRUMENTS MINILYZER analog audio analyzer-audio meter removeBEHRINGER CT-100 CABLE TESTER removeTOA ZM-104 Impedance Meter remove
Image
SKUH02PH00033ACT-100DIGILYZERMINILYZERE005950ZM-104
Rating
Price 393.17 incl. GR VAT 297.60 incl. GR VAT 3,013.26 incl. GR VAT 1,116.00 incl. GR VAT 32.00 incl. GR VAT 363.00 incl. GR VAT
Stock

Out of stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentHandheld Audio Analyzer with USB Interface
  • Built-in calibrated measurement microphone
  • 1/3 octave real-time analyzer
  • 31-band EQ setting value display (boost/cut)
  • RT60 measurement
  • Phase checker
  • Noise generator with pink noise, 1kHz and polarity test signal, balanced output
  • Memory and average calculation function
  • SPL meter calibration through sound level calibrator
  • Sound Pressure Level Meter from 30 dB~130 dB
  • Line signal measurement display in dBu, dBV, or Volts (AC)
  • SPL meter and level meter have three level range selections
  • Maximum level, Peak hold displays
  • XLR input and output sockets
  • USB interface for desktop software control
  • Audio test signal CD and supporting software
  • Three power modes: (1) Power Save (2) On (3) Off
  • Operates seven hours with four AA batteries
  • AC power adapter included

Cable Tester ACT-100

The Alphaton active remote cable tester can be used for testing either normal short
cables or long ones, especially mufticores, wkh connectors not being accessible at
one time. The tester is especially suded for fixed installations where cables can not
be tested with a standard type cable tester or Ohm meter. Either symmetric and
unsymmetric cables can be tested.
“Cold" solderings and junction resistances are displayed by color or luminosity changes
in three color LED Display. The imprinted fault table incorporates alt important fault
conditions, indeed not all possible ones due to their reiatively large number. In case the
display is in a state which cannot be found on the imprinted table, it can be looked up in
the user's manual. In any case, however, the cabie is in aquite unusable state and should
be repaired or replaced.The Alphaton cable tester has a SEND and a REMOTE section.
The REMOTE sectionconsistsof two recessed mounted XLR type male or female connector
and a stereo phone jack at the right hand side of the tester. Additionally, a separate REMOTE
plug is delivered togetherwith the active remote cable tester for testing long cables in fixed
installations.

 

Digilyzer? DL1
 
Digital audio analyzer / audio meter with integrated speaker, audio lens and a
comprehensive event logger. Digital audio becomes simple by using the Digilyzer DL1.
The digital audio meter Digilyzer DL1 provides a comprehensive set of analysis
functions for digital, audio and video related audio signals.   
It handles virtually all digital audio formats including ADAT and sampling frequencies
up to 96 kHz. The simple and intuitive operation allows the user to monitor, analyze
and troubleshoot any digital signals.
Debugging of digital audio signals becames easy with the assistance of the Digilyzer:
Features like the integrity check, the integrated speaker with audio lens function, the
logging functions, the ?over all? view of all important parameters and many more functions
to allow you to understand whats going on and finding faults easier than ever.
The Digilyzer is a handheld, battery powered device with optional mains power supply and
optional USB interface called MiniLINK.
MiniLINK, the USB interface for the Digilyzer allows documentation and data acquisition of
all DL1 functions in conjunction with the easy to use MiniLINK PC application. MiniLINK
supports online data logging up to several days. Read more about MiniLINK.

Product-details

? AES3, S/PDIF, TOS-Link
? ADAT Interface
? Sampling Frequency 32-96 kHz
? Digital Audio Analysis
? Carrier Status Analysis
? Carrier Signal Measurement
? Dual Domain Monitor Speaker
? Comprehensive Event Logger

Minilyzer ML1 is the state-of-the-art analog audio meter that fits
into the palm of your hand.
It provides you with a comprehensive set of functions essential
for the analysis of professional audio systems.The powerful Minilyzer
continuously measures the audio signal and displays the desired
results with all complementary information on an illuminated hi-res
graphical LC-Display.
The Minilyzer and the MiniSPL form a comprehensive integrating
sound level meter.
MiniLINK, the USB interface for the Minilyzer allows documentation
and data acquisition of all ML1 functions in conjunction with the easy
to use MiniLINK PC application. MiniLINK supports online data logging
up to several days.
Product-details

Measurement functions:
Level RMS, Relative
Sound Pressure Level
Distortion Analyzer (THD+N), k2 - k5 harmonics
VU & PPM Meter
Speaker Polarity Test(for all speaker types)
Signal Balance Error
Frequency-/Time-Sweep Recording
1/3rd Octave Spectrum RMS & SPL
Scope

Tests XLR, 1/4 in., 1/8 in., TT, RCA and MIDI connectors. The intelligent, CPU-controlled CT100 accepts virtually any connector type: XLR, mono and TRS phone (1/4 in., 1/8 in., TT), RCA and MIDI. It shows which input pin is connected to which output pin. Separate LEDs indicate proper shield connection and phantom power presence. The CT100 also offers an installed cable test mode and a continuity check plus a test tone generator. Features 3 modes: cable test mode, installed cable test mode, and test tone mode Accepts XLR, mono and stereo TRS phone (1/4 in., 1/8 in., TT), RCA and MIDI Connectors Continuity check Intermittent detect Phantom power detect Grounded shield detect Test tone generation (1 kHz and 440 Hz) Battery operation (requires 2 AA alkaline batteries)
  • Measures impedance of speaker lines up to 100k ohms
  • Batteries: four (AA)
  • Zero adjustment for accuracy on all ranges
  • Easy to read meter calibrates directly in ohms
  • Includes carrying case, test leads and impedance to power reference chart
  • Five year warranty
Weight0.55 kg0.80 kg0.30 kg0.30 kg1.00 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.55 kg
Weight 0.80 kg
Weight 0.30 kg
Weight 0.30 kg
Weight 1.00 kg
Weight 2.00 kg