| Content | The Phonic Powerpod RW series of mixers are powered mixers built into a compact and durable molded cabinet. Each Powerpod RW has a built-in stereo amplifier which is bridgeable and patchable. Super Hi-Z inputs allow for the addition of guitars and other instruments. A USB recorder is also incorporated into the unit, allowing the main mix to be captured onto any standard USB storage device. The units also offer high definition digital effects with 16 preset programs, each with it's own user-definable parameter. The 3-band EQ on every channel and dual multi-band graphic EQ with selectable In/Out switches give you maximum control. Further more, RW series has a built-in Bluetooth module offering audio streaming from Bluetooth-enabled mobile device.
Features:
- Built-in 2 x 150W / 4 ohms dual power amplifier for Main or Main/Monitor (Bridge mono, 300W / 8 ohms)
- 32/40-bit digital multi-effect processor with 16 programs plus parameter control and footswitch jack
- Six balanced Mic inputs and eight Line inputs (4 mono, 2 stereo channels)
- Two Super Hi-Z inputs optimized for direct instrument input
- 2-band EQ on each input channel
- 7-band master graphic EQ
- Pad control on channels 1 to 4
- AUX input
- Stereo RCA I/O
- +48V phantom power on channels 1 through 4
- Built-in limiters
- Monitor and effect sends on each input channel
- Drive level / effect out master control for signals sent to effect processor
- USB recorder/player
- Bluetooth audio streaming
| Μic Input: |
7-8 |
| Power 4Ω: |
300W - 500W |
| Console Layout: |
Vertical |
| The Phonic Powerpod 1082 R powered mixer is a versatile front of house PA mixer built into a compact and durable molded cabinet. Each Powerpod 1082 R has a built-in stereo amplifier which is bridgeable and patchable. Super Hi-Z inputs allow for the addition of guitars and other instruments. A USB recorder is also incorporated into the unit, allowing the main mix to be captured onto any standard USB storage device. The units also offer high definition digital effects with 16 preset programs, each with it's own user-definable parameter. The 3-band EQ on every channel and dual multi-band graphic EQ with selectable In/Out switches give you maximum control over your mix.
Features:
- 2 x 400W / 4 ohms stereo power amplifier for Main L/R or Mono/Monitor
- DFX, our 32/40-bit digital multi-effect processor with 16 programs plus parameter control
- 9 balanced Mic inputs and 12 Line inputs
- Two super Hi-Z inputs specially optimized for direct instrument inputs
- 3-band EQ on channels 1 through 9
- Dual multi-band graphic equalizers with in/out switches for Main L/R and Monitor or Main L/R
- Rumble filter for Mic inputs
- Pad control on channels 1-6
- Monitor and effect sends on each input channel
- +48V phantom power for mic inputs 1 through 6
- Two built-in limiters
- Rec out with trim control for record level matching
- Mains power switchable between 115 VAC and 230 VAC
- USB record/playback module records WAV files to removable flash drive and plays back MP3/WMA files
- USB recorder and playback device for capturing all performances with ease
| Μic Input: |
9-12 |
| Power 4Ω: |
500W > |
| Console Layout: |
Vertical |
|
A professional mixer offering two digital effect units and a 2 x 300 watts power amplifier to be used in entertainment and multimedia applications. Whether it is being used as mobile DJ-mixer, by a rental company, in a clubhouse, a hotel, a club / bistro, or in the party cellar at home: the comprehensive set of features and professional audio quality of the MP-7 Entertainment System also solves your sound reinforcement problem.
Maximum Midband Output Power, 1 kHz, THD = 1%: - into 4 ohms 2 x 340 W into 8 ohms 2 x 200 W Rated Output Power, 20Hz… 20 kHz, THD =0.2%: - into 4 ohms 2 x 300 W into 8 ohms 2 x 150 W Maximum Output Voltage of the power amplifier, no load THD @ 1 kHz, MBW=80kHz 43 Vrms MIC input to Main L/R output, +16 dBu 90 dB Channel seperation > 70 dB Input Sensitivity, all level controls in max. position: - MIC input -74 dBu (155µV) Line Input (Mono) -54 dBu (1.55 mV) CD/MD Line Input (Stereo) -24 dBu (49 mV) Phone Input (Stereo) -61.5 dBu (652 µV) Power Amplifier Input +6 dBu (1.55 V) Maximum Level, mixing desk: - MIC inputs +11 dBu Line inputs +30 dBu All other inputs +20 dBu Record Send output +14 dBu All other outputs +20 dBu Input Impedances: - MIC 1.8 kohms All other inputs > 10 kohms Output Impedances: - Record Send 1 kohms Phones 47 ohms All other outputs 75 ohms Equivalent Input Noise, MIC Input, A-weighted 150 ohms -130 dBu Noise, Channel inputs to Main L/R outputs, A-weighted: - Master fader down -104 dBu Master fader 0 dB, Channel fader down -91 dBu Master fader 0 dB, Channel fader 0 dB, Channel gain unity -84 dBu Signal/Noise-Ratio, power amplifier, A-weighted 105 dB Equalization STEREO: - LO Shelving +9/-30 dB / 60 Hz MID Peaking +9/-30 dB / 2.4 kHz HI Shelving +9/-30 dB / 12 kHz Equalization MIC: - LO Shelving ±15 dB / 60 Hz MID Peaking ±12 dB / 2.4 kHz HI Shelving ±15 dB / 12 kHz Master EQ, 2x7-band, Stereo ±10 dB Phantom Power, all MIC Inputs +24V dc Lamp +12V dc Power Requirements, factory preset, 50Hz....60Hz 100V/120V/230V/240V Power Consumption at 1/8 maximum output power 4 ohms 450 W Dimensions, (WxHxD), mm 455,5 x 175,8 x 340.6 Weight, including lid 13 kg Optional Rack-Mount-Kit MP7
|
- FLS Feedback Locating System
- Master Mute for channels 1-7
- Footswitchable effects defeat
- Combination XLR and 1/4 input jacks
- RCA, 1/8" Media input
- Selectable 9-Band Graphic EQ with FLS
- Selectable Main or Monitor dual power section
- RCA Record outputs
- LED Meter bridge
- Digital effects parameter control
- Power amp sub-sonic filtering
- On-board 24- bit digital effects with mute button
- Clip light and signal present indicator
- Kosmos-C
- Main line level 1/4" output
- Mid-Morph EQ
- DDT Speaker protection circuit
- 48 Volt Phantom Power
- Bluetooth? streaming audio
- Weight Unpacked: 10.44 kg
- Weight Packed: 11.8 kg
- Width Packed: 35.56 cm
- Height Packed: 55.88 cm
- Depth Packed: 34.925 cm
| EUROPOWER PMP550M
500-Watt 5-Channel Powered Mixer with KLARK TEKNIK Multi-FX Processor, FBQ Feedback Detection System and Wireless Option
-
- Ultra-compact 500-Watt powered mixer
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Ultra-high quality KLARK TEKNIK FX processor with 25 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
- “Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
- 5-channel mixer section features 5 mic/line channels plus separate Aux input
- 5 high-quality mic preamps with switchable Pad and Clip LEDs
- Effective, extremely musical 2-band EQ on all channels
- 7-band graphic EQ allows precise frequency correction
- 2 speaker outputs on 1/4" jack connectors
- Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
- Rack mount brackets included
- 3-Year Warranty Program*
- Conceived and designed by BEHRINGER Germany
|
500-Watt 10-Channel Powered Mixer with KLARK TEKNIK Multi-FX Processor, Compressors, FBQ Feedback Detection System and Wireless Option
- Ultra-compact 2 x 250-Watt stereo powered mixer
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- 8 "Invisible” IMP mic preamps with switchable +48 V phantom power for condenser microphones
- Ultra-high quality KLARK TEKNIK FX processor with 25 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
- Studio-grade compressors with super-easy "one-knob” functionality and control LED for professional vocal and instrumental sound
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
- “Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
- 10-channel mixer section features 6 mono and 2 stereo channels plus separate Aux input
- Effective, extremely musical 3-band EQ, switchable Pad and Clip LEDs on all mono channels
- Stereo 7-band graphic EQ allows precise frequency correction of monitor and main outputs
- Selectable stereo (main L/R), double mono (main/monitor) amplifier operation
- Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series, etc.
- Standby switch mutes all input channels during breaks while background music is provided via Aux input
- Adjustable stereo Aux input for connecting external signal sources
- Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
- Rack mount brackets included
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
|
Reviews
There are no reviews yet.