Content |
Features
The latest integrated amplifier from Pioneer created under the original Direct Energy concept incorporates the newly developed Direct Energy Design, pursuing high S/N ratio to create an overwhelming and life-like sound field. With features including isolated power supply, custom-made large capacitors, Direct Function, Power Amp Direct Mode, aluminium volume knob/front panel, and phono MM input, you can enjoy crisp, clear sound just as intended by the artists.
Direct Energy Design/Direct Energy Construction
Pioneer’s Direct Energy Design is based on the Direct Energy Concept—lossless transfer of energy from the amplifier to the speakers. Inheriting this philosophy, the latest integrated amplifiers feature optimised power supply/output circuit blocks, as well as parts layout. The result is excellent signal transfer and high S/N ratio. Additionally, the A-40AE adopts the newly developed Direct Energy Construction, which supplies power to the substrate by layering a separate substrate for the shortest possible power supply path via wire. This is because wires have inductance components and are likely to cause noise. With this significant revision, signal loss and noise can be further reduced to deliver audio with a wide sound field and clear sound image.
Isolated Power Supply
The windings for the power amplifier, pre-amplifier, and controls are each separated inside the power transformer to prevent mutual noise interference.
Pioneer-Exclusive Electrolytic Capacitors
The main capacitor, which determines an amplifier’s audio quality, was developed in collaboration with ELNA. The Pioneer logo on the sleeve shows that it is an exclusive pure audio capacitor.
Direct Function
The A-40AE features Direct Function, which bypasses other circuits except for the volume to offer a pure listening experience suitable for musical content. The function is not just a simple switching, but is finely tuned to enhance the musicality.
Power Amp Direct Mode
With the power amp direct terminal, you can connect an external pre-amplifier, and use the component as a power amplifier in a multichannel setup.
Anti-Standing Wave Insulators
The Anti-Standing Wave Insulator features a special form with no parallel sides inside to prevent cavity resonance. This makes the sound localisation, tone, and scale clearer,while also contributing to seamless connection between the channels and improved response to quick sound.
Non-Magnetic Material Speaker Terminals
The speaker terminals use non-magnetic material, which is less susceptible to external noise, and transmits signals to the speakers at high purity. The A-40AE is equipped with two sets of speaker outputs (A, B) that can be used individually or in parallel, as well as transparent high-grade speaker terminals for a reliable connection.
Phono (MM) Input
The A-40AE is equipped with a phono input (MM) terminal, letting you connect a turntable for enjoying quality audio performance from vinyl records.
Digital Inputs
The optical and coaxial digital inputs let you connect your TV or other audio players and enjoy quality sound. Hi-Res Audio is also supported, with the capacity to process up to 192 kHz sampling rates.
Aluminium Volume Knob and Front Panel
The A-40AE features an aluminium volume knob with a solid, highgrade feel and style. The simple aluminium front panel also adds a touch of elegance to the audio experience.
Auto Standby
The integrated amplifier automatically switches to standby mode after 20 minutes of no audio input or operation.
*PIONEER and the logo are registered trademarks of Pioneer Corporation, and are used under license.
DESIGN & BUILD
- Direct Energy Design/Direct Energy Construction
- Clean Ground Construction
- Isolated Power Supply Circuits
- Wolfson 192 kHz/24-bit D/A Converter
- Custom-Made ELNA Capacitors
- Hi-Res Audio Compatible
- Direct Function
- Power Amp Direct Mode
- Speaker A + B
- Tone Control (Bass/Treble)
- Balance Control
- Loudness
- Aluminium Volume Knob
- Aluminium Front Panel
- 1.6 mm-Thick Rigid Steel Chassis
- Anti-Standing Wave Insulators
- Auto Standby
CONNECTIONS
- Analogue Audio Inputs (Gold Plated): PHONO (MM), CD/SACD,LINE 1, LINE 2, LINE 3, LINE 4, P.AMP DIRECT
- Digital Audio Inputs: Optical, Coaxial (Gold Plated)
- Analogue Audio Output: LINE OUT (Gold Plated)
- Phones Output
- SR In/Out
- AC Inlet (Large Type)
Specifications
- 60 W + 60 W (20 Hz-20 kHz, THD 0.5 %,4 ohms, 2ch Driven)
- 30 W + 30 W (20 Hz-20 kHz, THD 0.4 %,8 ohms, 2ch Driven)
- Guaranteed Speaker Impedance(2 Speaker Terminals): 4-16 ohms
- Frequency Response: 10 Hz-100 kHz +1 dB/-3 dB
- Signal-to-Noise Ratio (IHF-A) 106 dB(LINE In, SP Out), 81 dB (PHONO In,SP Out)
- Power Requirements: AC 220-230 V,50/60 Hz
- Power Consumption: 150 W
- Power Consumption During Standby:0.2 W
- Dimensions (W x H x D): 435 x 129 x 323 mm
- Weight: 8.2 kg
|
Τi 60 tube
Integrated tube amp.Four line inputs.
2X12AU7, 4x EL34, 1x12AX7
35 Wrms per chan.4-8 ohm.
Class AB push-pull
Remote control included.
|
The PM6006 is an upgraded successor of the multi-award-winning PM6005. We've retained the pre-amp and power-amp sections that exclusively feature discrete components - not a single IC in sight of the signal path. The PM6006 is upgraded for peak current at the amplifier stage, which makes it possible to refine the sound for you in much more detail.
Maximum Dimensions (W x D x H) | 17.3 x 14.6 x 4.1 |
|
High sound quality Network HiFi Receiver with support for DSD 5.6MHz reproduction. Compatible with MusicCast and packed with network functions. Unlimited enjoyment of many different sound sources, including hi-res sources, smartphones and streaming services.
- MusicCast expands entertainment possibilities
- Streaming services offer a huge range of listening choices
- Enjoy the entire spectrum of all your favorite modern music sources
- 5.6MHz DSD Native and AIFF 192kHz/24bit reproduction with high performance 24-bit D/A converter
- MusicCast CONTROLLER lets you operate from your smartphone or tablet
- Wireless music streaming via Bluetooth® or AirPlay
- Bluetooth Output for convenient music streaming
- USB digital connection for iPod, iPhone, and USB devices
- Pure Direct Mode for greater sound purity
- Digital audio input for TV or Blu-ray player
- Eco Mode and Auto Power Standby
MusicCast
MusicCast is a new revolution in network audio, use all your MusicCast products together or separately, itʼs completely up to you. Control it, all from one app, designed to be intuitive, quick and simple to use. Use a soundbar, a wireless speaker, an AV Receiver, HiFi audio whichever suits you best, mix and match then expand your MusicCast system as time goes on. All new from Yamaha, the MusicCast system brings everything to everywhere for everyone.
MusicCast Expands Entertainment Possibilities
MusicCast employs a high performance wireless network to deliver music and audio enjoyment. It can stream digital music content from your smartphone, PC or NAS to other MusicCast devices in your home. It can also share the music from external devices such as a CD player or TV connected to the R-N602. Audio content from Bluetooth-connected smartphones or tablets can also be streamed to MusicCast devices in multiple rooms.
Enjoy the Entire Spectrum of All Your Favourite Music Sources
The R-N602 is a receiver and network audio player in a single unit. You can use it to easily play audio sources downloaded from the Internet and stored on a PC or NAS system. Or, enjoy streaming music services and internet radio (with vTuner). Moreover, Yamahaʼs original MusicCast App allows you to enjoy your favourite tunes on a smartphone or tablet device via wireless connection.
Streaming Services Offer a Huge Range of Listening Choices
Support for the music streaming services Spotify, Pandora, Juke, Napster, Rhapsody and Sirius XM means youʼll enjoy a wide variety of music content. Furthermore, support for the vTuner radio station database enables sampling of Internet radio broadcasts from around the world.
*Music service availability varies by region.
Wireless Music Streaming via Bluetooth or AirPlay
Enjoy music from your smartphone or tablet wirelessly using a Bluetooth connection. You can also use the convenient AirPlay function for wireless music streaming from iPhone or iPads. In addition, a Network Standby function providest he convenience of having the R-N602 turn on and off automatically.
Bluetooth Output for Convenient Music Streaming
The R-N602 is equipped with the latest Bluetooth technology, making wireless operation more convenient than ever. You can stream music from the R-N602 to Bluetooth headphones for private listening or to Bluetooth speakers.
Easy setup with your smartphone or tablet
Use your smartphone or tablet together with the MusicCast CONTROLLER app to operate the speaker and change settings quickly and easily. The same Controller app functions as a remote control for all your MusicCast-compatible devices too.
Other Notable Features
• Continuously Variable Loudness Control
• Terminal for a Subwoofer
• Phono MM terminal for vinyl playback
• Screw-type speaker terminals
• 40 station FM/AM preset tuning
• Speaker selector and speaker terminals for two systems
Receiver / Integrated Amplifier
Network section |
DLNA |
Version 1.5 |
File Format |
MP3, WMA, MPEG4 AAC, WAV, FLAC, AIFF, ALAC, DSD |
Wi-Fi |
Yes (with Wireless Direct) |
AirPlay |
Yes |
Bluetooth |
Yes (SBC/AAC) |
Minimum RMS Output Power |
80W + 80W (8 ohms, 40 Hz-20 kHz, 0.04% THD) |
Maximum Power (4 ohms, 1kHz, 0.7% THD, for Europe) |
105 W + 105 W |
Maximum Power(8 ohms, 1 kHz, 10% THD) |
115 W + 115 W |
High Dynamic Power/Channel (8/6/4/2 ohms) |
105 / 125 / 150 / 178 W |
Frequency Response |
0 ± 0.5 dB / 0 ± 1.0 dB |
Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz) |
0.015% (40 W / 8 ohms) |
Signal-to-Noise Ratio (CD) |
100 dB (Pure Direct on, 200 mV) |
Audio In / Out |
9 / 2 |
USB Input |
Yes |
Subwoofer Out |
Yes |
FM 50dB Quieting Sensitivity (IHF, 1 kHz, 100% Mod., Mono) |
3 µV (20.8 dBf) |
FM Signal-to-Noise Ratio (Mono/Stereo) |
65 dB / 64 dB |
ToP-ART |
Yes |
Standby Power Consumption |
0.1 W |
Dimensions (W x H x D) |
435 x 151 x 392 mm; 17-1/8” x 6” x 15-7/16” |
Weight |
9.8 kg; 21.6 lbs. |
| For a long time, installers worldwide have been unhappy with consumer electronics and they were looking for a professional integrated amplifier for use in commercial environments, boardrooms or small businesses designed for 24/7 operation. Therefore Apart developed the CONCEPT1, a stereo or two mono channel (2 x 80 watts @ 4 ohms) amplifier for small and medium-sized projects.
This CONCEPT1 2-zone integrated stereo amplifier can operate with one stereo zone, two volume-linked mono zones or two individual-volume mono zones. The unit can be controlled via RS232 what makes integration into your AV solution possible. The built-in limiters and system design guarantee a failsafe solution 24 hours a day, 7 days a week.
To make the life of the end-user as easy as can be, the CONCEPT1 has user settings and installer settings. Only the absolute
19" (483 mm wide) rack mounting |
Yes |
height- rack units (1U=44 mm) |
2 U |
depth (build in) |
293 mm |
power supply |
230 VAC volts |
power consumption (max) |
< 200 watts |
output power RMS 4 ohms |
2 x 80 watts |
output power RMS 8 ohms |
2 x 60 watts |
music program power |
100 watts |
minimum impedance load |
4 ohms |
zone outputs |
2 |
MIC inputs balanced |
1 |
line input unbalanced |
4 |
tone control |
Yes |
RS232 (serial communication port) |
Yes |
priority switch |
2 |
priority levels |
1 |
cooling system |
convection |
applicable low impedance |
Yes |
|
Ti 120 SIGN.
Special power and output transformer
from BHS uk and Mundof M-Cap
signal capasitors
Integrated tube amp.Four line inputs.
2X12AU7, 4x KT 88, 2x12AX7
2x6SN7 75 Wrms per chan.4-8 ohm.
Class AB push-pull.Remote control inc.
Negative feedback on/of switch.
echnical specification
|
|
|
Integrated Amplifier
|
Frequency response:
|
10 Hz - 50 kHz (± 0.5 dB)
|
Total harmonic distortion (THD):
|
1 % (1 kHz)
|
Signal-to-noise ratio:
|
92 dB
|
Input Impedance:
|
100 kOhm
|
|
|
Vacuum tube:
|
4x KT88/EL34, 2x 12AU7, 2x 12AX7, 2x 6SN7
|
Dimensions W x H x D:
|
440 x 220 x 390 mm
|
Weight:
|
28 kg
|
Accessories:
|
Remote Control
|
Input Terminals:
|
Tape, CD, AUX, Tuner
|
Output terminals:
|
Tape out
|
Circiut:
|
Class A/B P.P.
|
Colour:
|
Chassis chrome, transformer black
|
Colour front:
|
black, silver
|
Sensitivity
|
590 mV
|
Output Impedance:
|
4 Ohm, 8 Ohm
|
Power Output:
|
2 x 70 Watt @ 1 % THD
|
Consumption:
|
max. 380 Watt
|
Highlights
|
switchable reduction of feedback
|
|
Reviews
There are no reviews yet.