| Content |
The DDJ-SB2 takes you beyond control. Not only does it boast all popular features from the DDJ-SB, it also adds some amazing new pro-DJ functions.
Hitting the decks has never been easier and more intuitive - even for first-time DJs. This controller has been upgraded with 4-deck control and dedicated buttons to switch between channels effortlessly. Plus a trim knob and level meters to master the input volume, and Pad Trans beat effects will uplift your DJ skills in no time.
DDJ-SB2 Full Feature List: - USB powered
- Combo HP/LP filter for each channel.
- Hot Cue, Auto Loop, Manual Loop and Sampler modes
- Dedicated Serato software FX Control
- Single Mic Input (1/4” jack)
- Master RCA output
- Both 1/4” and 1/8” mini jack headphone outs
- Full MIDI Support with MIDI Out
- High resolution, touch sensitive jog wheels
- The popular Filter Fade control that adds two high pass filters to the crossfader
DDJ-SB2 vs DDJ-SB; New Features - A Brighter Display
- Improved Button Layout
- 4 Deck controls
- Pad Trans beat effect to cut volume of a track in time with the BPM using the performance pads
Pioneer DDJ-SB2 2 Channel Serato DJ Controller - Black
• Two channels allowing you to control two tracks, loops or samples at a time
• Master and two headphone outputs allowing you to connect speakers and headphones at the same time
• Microphone input allows you to add voice into the mix
• Ten on-board effects powered by iZotope
• Compatible with PC and Mac
• Serato DJ Intro software included
Special Feature
• Filter Fade function allows DJs to do more than just mix
What has been improved from the DDJ-SB?
The DDJ-SB2 not only boasts all of the popular features from the DDJ-SB but it also adds some amazing new pro-DJ features. The DDJ-SB2 features 4-deck control and dedicated buttons for switching between channels. The trim knob and level meters allow you to master the input levels. The Pad Trans beat effects will uplift your DJ skills in no time.
Channels and Controls
The DDJ-SB2 is a two channel DJ controller allowing you to control two tracks, loops or samples at the same time. Each channel features manual high/low pass filters. There are two large aluminium jog wheels which provide dynamic performance and great scratch response. On-board controls provide immediate access to play, cue, sync, shift, hot cue, auto loop, manual loop and sampler functions. A unique filter fade function allowing you to manipulate both volume and base filters with the use of the cross fader, adding effortless transitions to your mix.
What can I connect to my DDJ-SB2?
The DDJ-SB2 features a master output connection allowing for connection to an amplifier or powered speakers. There are two headphone channels with both 1/4" and 3.5mm sockets on each channel allowing you to monitor your mix and professionally manage loops and transitions. The DDJ-SB2 has a USB MIDI connector allowing it to be used as a MIDI controller.
Compatibility and Software
The DDJ-SB2 has been designed for plug-and-play control of the included Serato DJ Intro software allowing for quick installation and setups. The DDJ-SB2 is MIDI compatible with compatibility with a wide range of alternative DJ software, allowing you to choose from a diverse library of industry leading mixing software. The DDJ-SB2 is both PC and Mac compatible with support for 32 bit or 64 bit operating systems.
| Specifications |
| | Dimensions |
| | Height | 58.5 mm | | Width | 487 mm | | Depth | 271.2 mm | | Weight | 2100 g | | Software System Requirements |
| | Windows 7 (32 bit) | (CPU) 2.0 GHz Core 2 Duo, (Memory) 1GB | | Windows 7 (64 bit) | (CPU) 2.4 GHz Core 2 Duo, (Memory) 1GB | | Mac OS (32 bit) | (CPU) 2.0 GHz Core 2 Duo, (Memory) 1GB | | Mac OS (64 bit) | (CPU) 2.4 GHz Core 2 Duo, (Memory) 1GB | | Display Resolution | 1280 x 720 or higher | | Connections |
| | Power Requirements | USB Powered | | Inputs |
|
| 1 x Microphone (6.35 mm, 1/4" Jack Socket) | | Outputs |
|
| 1 x Master (Phono/RCA) |
| 2 x Headphone Monitor (3.5mm/1/4" Jack combination) |
| USB (MIDI Control) |
| 1 x Master (Phono/RCA) | | Main Features |
| | Included Software | Serato DJ Intro | | USB Bus Powered | Yes | | Soundcard | 24-bit/44.1 kHz | | Plug and Play | Yes | | Supported Audio Formats | MP3, OGG, AAC, M4A, ALAC, AIF, WAV | | Performance Controls |
| | Channels | 2 | | Deck Control | 4 | | Filter | High & Low Pass filter | | Effects | 10 effects | | Hot Cues | 4 | | Autoloop | Yes | | Manual Loop | Yes | | Jog Wheel | Yes | | Slip Mode | Yes | | Talkover Function | Yes | | Package Contents |
|
| 1 x DDJ-SB2 DJ Controller |
| 1 x USB Cable |
| 1 x CD-ROM Installation Disc |
| 1 x Quick Start Guide |
| Take your performance anywhere
The DDJ-800 2-channel DJ controller is a pro DJ setup that’s made to go wherever you do. This portable unit inherits the club-style layout and popular features of the DDJ-1000, including Color On Jog Displays, and packs it all into a lighter body. The result is a professional performance controller that you’ll have no trouble transporting between gigs at weddings, parties and anywhere else you play.
Stop worrying about MCs walking in front of the speaker thanks to the compatible Feedback Reducer feature in rekordbox dj. The system will automatically bring down the ‘howling’ sound from the mic – extra handy when you have 2 microphones plugged in at once. Use the DDJ-800 to mix audio from external sources, and apply Sound Color FX, Beat FX, EQs and Trim to make all of your shows unique.
Compact and portable
Though it feels like our advanced DDJ-1000 DJ controller, the DDJ-800 is 1.3 kg lighter so you can comfortably transport it between events.
Jog display
Keep your eyes on the deck and off your computer thanks to the customizable Color LCD On Jog Display located in the centre of each jog wheel. Reveal only the information you need, whether that’s BPM, waveform, playback position or Hot Cue and Loop points.
Feedback reducer
Enjoy peace of mind when you hand the mic to guest speakers and MCs. The Feedback Reducer feature in rekordbox dj will instantly detect and reduce the ‘howling’ sound of microphone feedback so you’ll remain in complete control of the audio.
Club-style layout
Performing on the DDJ-800 feels like you’re using a professional NXS2 set-up. The controller’s buttons, knobs and faders are arranged in the same way as those on our club-standard CDJ and DJM gear.
Audio mixer feature
Use the DDJ-800 to control the channel faders, trims, and EQs of external equipment such as turntables and media players. Additionally, you can also manipulate sound from external sources using the software’s FX when the controller is connected to a PC/Mac running rekordbox dj.
Main Features
Auto Standby
Yes
Included DJ Software
rekordbox dj
DVS Control
rekordbox dvs (not included)
Software System Requirements
Mac
macOS Mojave 10.14 (Updated to the latest version)
macOS High Sierra 10.13 (Updated to the latest version)
macOS Sierra 10.12 (Updated to the latest version)
Windows
Windows® 10/ 8.1/ 7 (latest service pack)
For more information go to rekordbox.com
What\'s in the box
DDJ-800
AC adapter
Power Cord
USB cable
Quick Start Guide
rekordbox dj licence key card
Specifications
Width
632 mm
Height
69.7 mm
Depth
334.5 mm
Weight
4.7 kg
Soundcard
24 bit/44.1 kHz
Frequency Range
20 - 20000 Hz
Signal-to-Noise Ratio
111 dB
Distortion
< 0.003 % (USB)
Performance Control
Channels
2
Deck Control
4 / Dual
Jog Wheel
154 mm durable aluminium jog wheel
Color on jog display
Yes
Feeling Adjust
Yes
Pad FX
Yes
Beat FX
Echo
Multi Tap Delay
Spiral
Reverb
Trans
Flanger
Phaser
Pitch
Slip Roll
Roll
ENIGMA JET
MOBIUS (SAW)
MOBIUS (TRIANGLE)
LOW CUT ECHO
Sound Color FX
Dub Echo
Filter
Noise
Pitch
Sampler
16slot x 4bank
Hot Cues
16
Auto Beat Loop
Yes
Beat Jump
Yes
Slip Mode
Yes
Talkover Function
Yes
Feedback Reducer
Yes
EQ Isolator
Yes
Fader
Fader Start
Yes
Crossfader Curve Adjust
Yes
Terminals
Inputs
2 PHONO/LINE (RCA)
2 MIC (XLR & 1/4 inch TRS Jack, 1/4 inch TRS Jack)
1 AUX (RCA)
USB
1 USB B port
Outputs
2 MASTER (XLR, RCA)
1 BOOTH (1/4 inch TRS Jack)
2 HEADPHONE MONITOR (1/4 inch Stereo Phone Jack, 3.5mm Stereo mini-jack) |
The CMD Studio 4A provides all the tools needed to learn the basics of DJing - or to work the dance floor into a virtual frenzy. This is no crippled budget controller; Studio 4A has the very same features you'll find on the bigger, more expensive controllers. And the Studio 4A not only includes those features - it actually improves on them.
Product Features: - Highly integrated 4-deck controller with built-in 4-channel USB audio interface
- Deckadance DJ software from Image Line included
- Compatible with popular DJ software including Native Instruments Traktor*, Serato Scratch Live*, Ableton Live* and any other MIDI-compatible programs
- Powerful 4-channel USB audio interface with 24-bit converters and ultra-low latency operation under Windows and OSX operating systems
- Large 6" touch-sensitive high-resolution control platters for precise control
- Class-compliant MIDI protocol enables DJs to use the CMD Studio 4A with any MIDI software
- Professional 100 mm pitch faders and 60 mm volume faders for ultimate feel and resolution
- Complete mixer section with crossfader and 2 channel faders, 3-band EQ, EQ kill, FX assign, cue and track load buttons
- Full-fledged deck sections including key lock, pitch control, auto looping, 8 hot cues and full control over 2 FX modules
- Backlit buttons responding to the application - no need to look at the computer screen
- MIDI-reactive controls take your eyes off the computer screen
- Slim tabletop design for ultimate portability
- Compatible with other BEHRINGER CMD controllers for full expandability
- High-quality components and exceptionally rugged construction ensure long life
|
- Eight Illuminated, Velocity Sensitive Performance Pads
- Dedicated Sampler Volume Slider
- Slip Mode Function Enables Continuous Music Playback in the Background Even When Loops and Hot Cues are Being Performed
- FX Knobs/Buttons for Operation of iZotope Effects
Overview
Designed for Serato® software users, specifically for "Serato DJ,” the DDJ-SP1 is a slim and compact sub-controller that uses multiple performance pads, controls, buttons, and knobs to trigger a variety of unique audio samples and effects. The DDJ-SP1 is designed to be the ideal companion to Pioneerʼs new DJM-900SRT mixer but can also be matched with other systems via its MIDI controller functionality.
Software
The DDJ-SP1 is made for Serato software users who want to add effects when using a professional DJ setup of two players and a mixer such as the DJM-900SRT. With the sub-controller, DJs can enhance their performances with multiple effects, similar to what\'s being done with our extremely popular DDJ-SX controller for Serato DJ. The DDJ-SP1 includes a free of charge download of a Serato Video plug-in (valued at more than $100). The plug-in is compatible with Serato DJ, Scratch Live and ITCH, that makes it extremely easy for users to insert video, effects and image files with music.
Serious Audio Effects
- Performance Pads – Sixteen Performance Pads on the sub-controller for seven different functions including Hot Loop, Auto Loop, Manual Loop, Hot Cue, Roll, Slicer, and Sampler. A "Sampler Velocity" function determines the output volume of the sample based on how hard the pads are struck. Each pad can be assigned as a hot cue point, and its blue illumination will signify its state of play for instant graphic feedback.
Sampler Volume Fader - In between the the performance pads is a volume slider to control output of the trigger pads. The convenient location of the slider enables quick volume adjustment during finger drum performances.
- Slip Mode – Pioneer included a Slip Mode function that enables continuous music playback in the background even when loops and hot cues are being performed. The functionality can also be used with players and controllers that support Serato DJ but not Slip Mode.
- FX Knobs/Buttons – The integrated knobs and buttons are arranged for Serato DJ software for operation of iZotope® effects.
Additional Features
- The sub-controller includes a free of charge download of Serato Video (valued at more than $100), a video control plug-in compatible with Serato DJ, Scratch Live and ITCH, that makes it extremely easy for users to insert video, effects and image files with music.
- USB connectivity and charging.
- DDJ-SP1 can be mounted on the X-Stand (T-U101), Pioneerʼs portable DJ stand (sold separately).
- Compact (12.9” x 7” x 1.8”) and weighs only three pounds, for easy transportation.
|
PERFORMANCE PAD-CONTROLLER
The Reloop NEON is a powerful pad controller for Serato DJ Pro that will elevate your performance to a whole new level.
EXTENSIVE SERATO SP6 SAMPLE CONTROLLER
Acting as the perfect support hardware for DVS users and controller DJs, the 8 ultra-low-latency and touch-sensitive RGB drum pads with aftertouch are perfect for triggering samples, cues, loops and effects. Coming in as the most extensive Serato SP6 sample controller on the market, the NEON also offers LED feedback for each sample slot.
PLUG-AND-PLAY PERFORMANCE TOOL
An extremely flat yet sturdy design makes NEON not only the ultimate plug-and-play performance tool, but also something that can also be easily stowed in any DJ bag and set-up for use in a matter of seconds.
SMART LINK FUNCTION
Taking inspiration from the game-changing RP-8000 turntables, you can also connect two NEON controllers via smart link function, saving precious USB ports while allowing you to push your performance further.
Reloop - Neon Facts
- Powerful Serato DJ drum pad modular controller
- Official Serato Accessory: plug-and-play with Serato DJ
- Dedicated Serato DJ SP-6 sampler control
- 4-deck control for Slicer, Cue and Loop
- Perfect addition for DVS users and controller DJs
- 8 touch-sensitive RGB performance drum pads
- A total of 8 intuitive performance modes (Sampler, Pad FX, Slicer, Looped Slicer, Cue, Flip, Hot Loops, Loop and Manual Loop)
- Supports brand new Flip mode: Create individual edits from a song 'on the fly' and trigger these sequences as Flip
- FX after touch control for multi-sensorial effect modulation
- Supports the brand-new Serato Flip extension pack
- The most extensive Serato SP6 sample controller on the market
- 5 different trigger variants per sample slot (One Shot, Toggle, Hold, Repeat Mode and Sync) with corresponding status LED for visual feedback
- Access to all 6 synchronizable sample slots in 4 banks
- Dedicated sample volume control (Master + Slot)
- Direct access to 6 selectable iZotope FX in Pad FX mode (Velocity Depth Control
- Slicer performance modes for slicing of your tracks
- 8 colour coded cue points per deck which can be triggered as roll
- Quick access to more than 8 storable loops and manual loop control
- 2 endless push encoders for volume control, track navigation, loop editing as well as loop Shift and loop roll function
- Censor, slip and sync functions for all decks can be selected directly with the controller
- Internal/relative mode for DVS users
- USB bus-powered
- Smart Link: Neon can be connected to each other via mini jack cable
- Works with every MIDI compatible DJ or studio software
- Sturdy construction, but still easily portable due to slim profile design
- Connections: mini USB, link port, Kensington
- Incl. USB cable, quick start guide and link cable (3.5 mm jack)
| The Reloop BeatMix 2 is a performance-oriented 2-channel pad controller for Serato. Both companies have teamed up, to develop a 'fun to use' 2-Channel controller for the worldwide popular DJ software Serato to work seamlessly plug 'n' play: Connect and start mixing.
Technical Data
-
- Input: 1x mic (6.3 mm jack)
- Output: 1x master out (stereo RCA), 2x headphones monitor out (3.5 mm & 6.3 mm jack)
- Dimensions: 492 x 317 x 35 mm
- Weight: 2,5 kg (net)
- Incl. Serato DJ INTRO, USB cord and quick start guide
System requirements Mac:
-
-
- Mac OS X 10.6.+ / 10.7.+ / 10.8.+ (Please check Serato.com for updates)
- 32-bit: Intel 2.0 GHz Core 2 Duo, 2 GB RAM
- 64-bit: Intel 2.4 GHz Core 2 Duo, 4 GB RAM
- If you have a large library, you will benefit from having more RAM
- Min. screen resolution 1280*720
- Available USB 2.0 port
System requirements Windows:
-
- Windows 7 (Please check Serato.com for updates)
- 32-bit: Intel 2.0 GHz Core 2 Duo, 2 GB RAM
- 64-bit: Intel 2,4 GHz Core 2 Duo, 4 GB RAM
- AMD processors are not recommended and officially not supported
- If you have a large library, you will benefit from having more RAM
- Min. screen resolution 1280*720
- Available USB 2.0 port
Features
- 2-Deck SERATO Performance PAD Controller
- Easy plug 'n' play: Simply connect to your computer and start mixing your tracks
- Performance pad section: 16x multi-colour drum pads for triggering loop-, sample- and hot cue-mode
- Colour-coded trigger pads give you visual feedback about mode and function
- Split mode: CUE and sampler mode can be combined
- Ergonomic and intuitive mixer/player design for optimal work flow
- Dedicated 3-band EQ control and gain control per channel
- SP-6 sample bank control with dedicated sampler volume fader
- Fader-start feature: Easy CUE control with the channel fader
- Quick-skip: Fast search within a track
- Slim-profile, big jog wheels with premium aluminium platters and superior scratching integration
- Control many, stunning DJ effects (FX engine by iZotope) with 2 FX units
- Integrated USB audio club interface
- 14-bit pitch fader with pitch bend control buttons
- Large transport section with stutter and sync controls
- Mouse-less playlist navigation
- 2x headphones connections on the front panel: 3.5 mm & 6.3 mm stereo jack incl. EQ control
- 6.3 mm jack mic input with volume control on the front panel
- SHIFT buttons for second layer control
- ASIO drivers (CORE compliant) with minimal latency and highest audio characteristics (PC/Mac)
- Seamless hardware integration for SERATO DJ & DJ INTRO
- MIDI-ready: Compatible with most popular DJ software
- USB bus powered: No power supply required!
|
Reviews
There are no reviews yet.