Content |
The DDJ-SB2 takes you beyond control. Not only does it boast all popular features from the DDJ-SB, it also adds some amazing new pro-DJ functions.
Hitting the decks has never been easier and more intuitive - even for first-time DJs. This controller has been upgraded with 4-deck control and dedicated buttons to switch between channels effortlessly. Plus a trim knob and level meters to master the input volume, and Pad Trans beat effects will uplift your DJ skills in no time.
DDJ-SB2 Full Feature List: - USB powered
- Combo HP/LP filter for each channel.
- Hot Cue, Auto Loop, Manual Loop and Sampler modes
- Dedicated Serato software FX Control
- Single Mic Input (1/4” jack)
- Master RCA output
- Both 1/4” and 1/8” mini jack headphone outs
- Full MIDI Support with MIDI Out
- High resolution, touch sensitive jog wheels
- The popular Filter Fade control that adds two high pass filters to the crossfader
DDJ-SB2 vs DDJ-SB; New Features - A Brighter Display
- Improved Button Layout
- 4 Deck controls
- Pad Trans beat effect to cut volume of a track in time with the BPM using the performance pads
Pioneer DDJ-SB2 2 Channel Serato DJ Controller - Black
• Two channels allowing you to control two tracks, loops or samples at a time
• Master and two headphone outputs allowing you to connect speakers and headphones at the same time
• Microphone input allows you to add voice into the mix
• Ten on-board effects powered by iZotope
• Compatible with PC and Mac
• Serato DJ Intro software included
Special Feature
• Filter Fade function allows DJs to do more than just mix
What has been improved from the DDJ-SB?
The DDJ-SB2 not only boasts all of the popular features from the DDJ-SB but it also adds some amazing new pro-DJ features. The DDJ-SB2 features 4-deck control and dedicated buttons for switching between channels. The trim knob and level meters allow you to master the input levels. The Pad Trans beat effects will uplift your DJ skills in no time.
Channels and Controls
The DDJ-SB2 is a two channel DJ controller allowing you to control two tracks, loops or samples at the same time. Each channel features manual high/low pass filters. There are two large aluminium jog wheels which provide dynamic performance and great scratch response. On-board controls provide immediate access to play, cue, sync, shift, hot cue, auto loop, manual loop and sampler functions. A unique filter fade function allowing you to manipulate both volume and base filters with the use of the cross fader, adding effortless transitions to your mix.
What can I connect to my DDJ-SB2?
The DDJ-SB2 features a master output connection allowing for connection to an amplifier or powered speakers. There are two headphone channels with both 1/4" and 3.5mm sockets on each channel allowing you to monitor your mix and professionally manage loops and transitions. The DDJ-SB2 has a USB MIDI connector allowing it to be used as a MIDI controller.
Compatibility and Software
The DDJ-SB2 has been designed for plug-and-play control of the included Serato DJ Intro software allowing for quick installation and setups. The DDJ-SB2 is MIDI compatible with compatibility with a wide range of alternative DJ software, allowing you to choose from a diverse library of industry leading mixing software. The DDJ-SB2 is both PC and Mac compatible with support for 32 bit or 64 bit operating systems.
Specifications |
| Dimensions |
| Height | 58.5 mm | Width | 487 mm | Depth | 271.2 mm | Weight | 2100 g | Software System Requirements |
| Windows 7 (32 bit) | (CPU) 2.0 GHz Core 2 Duo, (Memory) 1GB | Windows 7 (64 bit) | (CPU) 2.4 GHz Core 2 Duo, (Memory) 1GB | Mac OS (32 bit) | (CPU) 2.0 GHz Core 2 Duo, (Memory) 1GB | Mac OS (64 bit) | (CPU) 2.4 GHz Core 2 Duo, (Memory) 1GB | Display Resolution | 1280 x 720 or higher | Connections |
| Power Requirements | USB Powered | Inputs |
|
| 1 x Microphone (6.35 mm, 1/4" Jack Socket) | Outputs |
|
| 1 x Master (Phono/RCA) |
| 2 x Headphone Monitor (3.5mm/1/4" Jack combination) |
| USB (MIDI Control) |
| 1 x Master (Phono/RCA) | Main Features |
| Included Software | Serato DJ Intro | USB Bus Powered | Yes | Soundcard | 24-bit/44.1 kHz | Plug and Play | Yes | Supported Audio Formats | MP3, OGG, AAC, M4A, ALAC, AIF, WAV | Performance Controls |
| Channels | 2 | Deck Control | 4 | Filter | High & Low Pass filter | Effects | 10 effects | Hot Cues | 4 | Autoloop | Yes | Manual Loop | Yes | Jog Wheel | Yes | Slip Mode | Yes | Talkover Function | Yes | Package Contents |
|
| 1 x DDJ-SB2 DJ Controller |
| 1 x USB Cable |
| 1 x CD-ROM Installation Disc |
| 1 x Quick Start Guide |
| Digital Multimedia Player
- Tabletop format
- Supports MP3, AAC, WAV and AIFF, as well as the hi-res audio formats FLAC AAC up to 48kHz / 24-bit
- 206 mm Large jog wheel
- 7" (17.8 cm) Colour touch display
- Operates with the free "rekordbox" software or app
- Separate power supply for analog and digital audio circuits to prevent noise interference
- 8 Hot cues
- Beat Jump to jump 1, 2 or 4 beats forwards or backwards from the current playback position
- Pro DJ Link for controlling up to 4x XDJ-1000MK2 or laptops
- 1x RCA analog output
- 1x RCA coaxial output
- LAN connection
- 1x USB Type A
- 1x USB Type B
- Dimensions: 305 x 110 x 382.5 mm
- Weight: 3.7 kg
- Incl. power cord, LAN cable, audio cable, and user manual
| ESSENTIAL 4-CHANNEL DJ CONTROLLER
- Dive into four-deck DJing, with full control over your mix
- Pristine, punchy sound with high dynamic range
- Plug and play with our pro DJ software TRAKTOR PRO 3 included
- Spin on two decks with TRAKTOR DJ 2 for iPad and desktop
DO MORE WITH FOUR
Layer tracks. Go back-to-back. Hook up a mic and an MC. Keep a wildcard up your sleeve and drop it when the dancefloor needs it: TRAKTOR KONTROL S3 has everything you need to DJ across four decks. Step up your sets, and play with total freedom.
FOUR DECK DJING
If you’ve been DJing on two channels so far, doubling down on decks means way more freedom in your mix – like layering beats, firing off samples, or keeping a banger track parked on Deck C. Whether you’re throwing in acapellas or love a double drop, four decks make it happen.
SYSTEM REQUIREMENTS
macOS 10.12, 10.13, 10.14 (latest update), Intel Core i5, 4 GB RAM
Windows 10 version 1803 or later (64 Bit), Intel Core i5 or equivalent CPU, 4 GB RAM
SUPPORTED AUDIO FORMATS
MP3, WAV, AIFF, Audio-CD, FLAC, Ogg Vorbis, non-DRM AAC
GENERAL
Monitor with 1280 x 800 screen resolution, USB 2.0, 1 GB free disc space. An internet connection and a graphics card which supports OpenGL 2.1 or higher are required to download and activate TRAKTOR software. Once installed and activated, all products can be used offline.
SUPPORTED DRIVERS
Core Audio, WASAPI, ASIO, DirectSound
HARDWARE SPECIFICATIONS
AUDIO |
|
Channels: |
4 out / 2 in |
Sample Rate / Resolution |
44kHz/48kHz – 24-bit |
|
|
MAIN OUT (BALANCED - XLR) |
|
Signal Level |
18.7 dBu |
THD+N |
0.001% |
Freq Resp |
+/- 0.1 dB |
Channel Separation L/R |
|
| Main Features
2 monophonic step sequencers
Up to 64 steps per sequence
Note, velocity and gate time settings per step
Note tie
16-track drum sequencer (one track per pad)
MIDI controller mode
Fully customizable for knobs, step buttons and velocity and pressure sensitive pads
Send MIDI CC, note data, program changes
16 Projects, each with 16x2 sequences, 16 drum sequences and a controller map.
Performance controls
Randomizer with Amount and Probability settings
Real-time looper/roller touch strip
Independent swing amount per sequence
Touch sensitive knobs
Tap Tempo
Connectivity
CV/GATE outputs (1 volt per octave CV, 10 volt gates)
8 drum gate outputs
Clock sync with multiple standards
MIDI In/Out with supplied MIDI adaptors
USB class compliant
Supports full parameter and sequencing editing capability using our free MIDI Control Center software
Kensington lock
Box contents
BestStep Pro Unit
Quick Start
Registration Card
2x MIDI adaptors
1x Clock adaptor
1x Anti groud-loop adaptor
Size & weight
Instrument size : 16.3 x 6.4 x 1.4 inches (415 x 163 x 36mm)
Instrument weight : 3.20 lbs. (1.450 Kg) |
The CMD Studio 4A provides all the tools needed to learn the basics of DJing - or to work the dance floor into a virtual frenzy. This is no crippled budget controller; Studio 4A has the very same features you'll find on the bigger, more expensive controllers. And the Studio 4A not only includes those features - it actually improves on them.
Product Features: - Highly integrated 4-deck controller with built-in 4-channel USB audio interface
- Deckadance DJ software from Image Line included
- Compatible with popular DJ software including Native Instruments Traktor*, Serato Scratch Live*, Ableton Live* and any other MIDI-compatible programs
- Powerful 4-channel USB audio interface with 24-bit converters and ultra-low latency operation under Windows and OSX operating systems
- Large 6" touch-sensitive high-resolution control platters for precise control
- Class-compliant MIDI protocol enables DJs to use the CMD Studio 4A with any MIDI software
- Professional 100 mm pitch faders and 60 mm volume faders for ultimate feel and resolution
- Complete mixer section with crossfader and 2 channel faders, 3-band EQ, EQ kill, FX assign, cue and track load buttons
- Full-fledged deck sections including key lock, pitch control, auto looping, 8 hot cues and full control over 2 FX modules
- Backlit buttons responding to the application - no need to look at the computer screen
- MIDI-reactive controls take your eyes off the computer screen
- Slim tabletop design for ultimate portability
- Compatible with other BEHRINGER CMD controllers for full expandability
- High-quality components and exceptionally rugged construction ensure long life
|
PERFORMANCE PAD-CONTROLLER
The Reloop NEON is a powerful pad controller for Serato DJ Pro that will elevate your performance to a whole new level.
EXTENSIVE SERATO SP6 SAMPLE CONTROLLER
Acting as the perfect support hardware for DVS users and controller DJs, the 8 ultra-low-latency and touch-sensitive RGB drum pads with aftertouch are perfect for triggering samples, cues, loops and effects. Coming in as the most extensive Serato SP6 sample controller on the market, the NEON also offers LED feedback for each sample slot.
PLUG-AND-PLAY PERFORMANCE TOOL
An extremely flat yet sturdy design makes NEON not only the ultimate plug-and-play performance tool, but also something that can also be easily stowed in any DJ bag and set-up for use in a matter of seconds.
SMART LINK FUNCTION
Taking inspiration from the game-changing RP-8000 turntables, you can also connect two NEON controllers via smart link function, saving precious USB ports while allowing you to push your performance further.
Reloop - Neon Facts
- Powerful Serato DJ drum pad modular controller
- Official Serato Accessory: plug-and-play with Serato DJ
- Dedicated Serato DJ SP-6 sampler control
- 4-deck control for Slicer, Cue and Loop
- Perfect addition for DVS users and controller DJs
- 8 touch-sensitive RGB performance drum pads
- A total of 8 intuitive performance modes (Sampler, Pad FX, Slicer, Looped Slicer, Cue, Flip, Hot Loops, Loop and Manual Loop)
- Supports brand new Flip mode: Create individual edits from a song 'on the fly' and trigger these sequences as Flip
- FX after touch control for multi-sensorial effect modulation
- Supports the brand-new Serato Flip extension pack
- The most extensive Serato SP6 sample controller on the market
- 5 different trigger variants per sample slot (One Shot, Toggle, Hold, Repeat Mode and Sync) with corresponding status LED for visual feedback
- Access to all 6 synchronizable sample slots in 4 banks
- Dedicated sample volume control (Master + Slot)
- Direct access to 6 selectable iZotope FX in Pad FX mode (Velocity Depth Control
- Slicer performance modes for slicing of your tracks
- 8 colour coded cue points per deck which can be triggered as roll
- Quick access to more than 8 storable loops and manual loop control
- 2 endless push encoders for volume control, track navigation, loop editing as well as loop Shift and loop roll function
- Censor, slip and sync functions for all decks can be selected directly with the controller
- Internal/relative mode for DVS users
- USB bus-powered
- Smart Link: Neon can be connected to each other via mini jack cable
- Works with every MIDI compatible DJ or studio software
- Sturdy construction, but still easily portable due to slim profile design
- Connections: mini USB, link port, Kensington
- Incl. USB cable, quick start guide and link cable (3.5 mm jack)
|
Reviews
There are no reviews yet.