Content | Ceiling speakers featuring elegant and innovative design that can be flush-mounted in false ceilings or panels.
Incorporate an 86 mm-3.5” a full range speaker. The speakers are equipped with a line transformer that enables direct connection to constant voltage systems at 70 V or 100 V. The multiple sockets on the transformer make it possible to select the output power from among several values.
Installation is quick and easy thanks to a special three-hook system that avoids the need for using screws and pallet or other attachment elements.
APPLICATIONS
- • Shopping centres
- • Sport centres
- • Corridors
- • PA systems in general
General Specs
- Recommended for speech and background-music reproduction
- Music power/RMS: 16/8W
- Low impedance (8Ω) or 100V
- 5" full range speaker
- Three hooks mounting system (no screws or other attachment elements)
- Built-in multi-tapped transformer for constant voltage connection
- Body in self-extinguishing (UL 94V-0) plastic and front metal grille RAL 9003 White
Acoustical Specs
- Type of speaker:Ceiling
- Frequency Response:90Hz ÷ 20 kHz
- Max SPL @ 1m:100dB
- Horizontal coverage angle:120°
- Vertical coverage angle:120°
- Power Handling:8W RMS
- Peak Power Handling:16W PEAK
- System Sensitivity:88dB
- Impedance:8Ω
- Protections:IP 44
- Speaker:3.5"
Inputs/Outputs
- Input connector:5 pin terminal block
- Constant voltage:100 V / 70V
- Power Selection:8 - 6 - 4 - 2 W (100 V)
Cabinet Specs
- Hardware:Plastic material
- Colour:White
- Grille:Steel
Size/Weight
- Height:110 / 4.33mm/inch
- Width:130 / 5.11mm/inch
- Depth:130 / 5.11mm/inch
- Net weight:88 / 1.94kg/lbs
|
Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 5-1/4” bass radiators
Freq. Response: 30 Hz - 30 kHz,
Impedance: 8 Ohms Rec. Ampl. Power: 10 - 250 watts
Inputs: One pair of gold plated spring loaded posts, Finishes: Paintable White
Outer Dimensions: 29.2 x 29.2 x 14.9cm
Cut Out Dimensions: 26.4 x 26.4 x 14.9cm
Driver Complement |
---|
Tweeter | Quantity | 1 | Diameter | 1" (2.54cm) | Type | Pure Aluminum Dome | Mid / Woofer | Quantity | 2 | Diameter | 4 1/2" (11.43cm) | Type | High Definition Bass/Midrange Driver | Bass Radiator | Quantity | 2 | Diameter | 5 1/4" (13.34cm) | Type | Planar Bass Radiator |
Electrical |
---|
Audio Inputs | Speaker Level | 1 Pair (Heavy Duty Spring Loaded) | Maximum Sensitivity | 1 watt @ 1 Meter | 92 dB | Total Frequency Response | Overall | 30 Hz - 30 kHz | Nominal Impedance | Compatible with | 8 ohm | Crossover | A/V Receiver Crossover Setting | Small (60 Hz) | Power Handling | 10 - 250 watts per channel |
Installation |
---|
Cut Out Dimensions | Height | 10 3/8" (26.35cm) | Width | 10 3/8" (26.35cm) | Mounting Depth | 5 7/8" (14.92cm) | Grille Dimensions | Height | 11 1/2" (29.21cm) | Width | 11 1/2" (29.21cm) | Outer Flange | Height | 11 1/2" (29.21cm) | Width | 11 1/2" (29.21cm) | Placement | Orientation | In Ceiling | Cabinet Type | Speaker Enclosure | Sealed Medite |
| JBL's Commercial Series Ceiling Speakers provide excellent performance for paging and background music applications. High sensitivity across the product line provides maximum sound level, even at low tap settings
Features :
* High 90 dB sensitivity
* 5 Watt multi-tap transformer for 100V, 70V and 25V distributed lines
* Very wide 175° coverage
* Fits CSS-BB4 backcan |
* Frequency Response (-10 dB)1: 150 Hz - 20 kHz
* Frequency Range (±3 dB)1: 200 Hz - 17 kHz
* Power Capacity:
o 50 Watts Continuous Program Power (2 hrs)
o 25 Watts Continuous Pink Noise (2 hrs)
o 30 Watts Continuous Program Power (100 hrs)
o 15 Watts Continuous Pink Noise (100 hrs)
* Nominal Sensitivity:
o 87 dB (4.0 V, 1 W)
o 84 dB (2.83 V)
* Nominal Coverage Angle3: 140° (+25°/-50°)
* Directivity (Q): 4.7
* Directivity Index (DI): 6.2 dB
* Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
* Rated Impedance: 16 ohms (no transformer taps)
* Recommended High-Pass Frequency: 150 Hz
Transducer
* Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.
Enclosure
* Enclosure Material: High impact polystyrene
* Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
* Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
* Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
* Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
* Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
* Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
* Net Weight (ea): 0.7 kg (1.5 lbs)
* Shipping Weight (pair): 2.0 kg (4.3 lbs)
* Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.
|
1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9
|
Outer Flange Dimensions | Metric :11” x 12-3/4” | 27.9 x 32.4cm
Cut Out Dimensions | Metric :9-7/8” x 11-5/8” | 25.1 x 29.5 cm
Depth from Flange | Metric :3-7/8” | 9.8 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 4-1/2” bass radiators
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Warranty :5 Years
Weight | Metric :13 lbs | 5.9 kg |
Reviews
There are no reviews yet.