| Content | The PL6X is a ceiling speakers featuring elegant and innovative design that can be flush-mounted in false ceilings or panels.
Incorporating a 160 mm (6”) loudspeaker.
Both have a coaxial 25 mm (1”) tweeter placed on a bridge support.
The speakers are equipped with a line transformer that enables direct connection to constant voltage systems at 70 V or 100 V.
The multiple sockets on the transformer make it possible to select the output power from among several values.
Installation is quick and easy thanks to a special three-hook system that avoids the need for using screws and pallet or other attachment elements.
Frequency Response (-10dB):
70 Hz ÷ 20000 Hz
System Sensitivity:
92 dB
Peak Power Handling:
48 W PEAK
Recommended Amplifier:
24 W
Input connectors:
Screw Terminals
Output connectors:
Screw Terminals
Constant Voltage Transformer:
70/100 V
Power selection 1:
12 W - 833 ohm
Power selection 2:
6 W - 1667 ohm
Power selection 3:
3 W - 3333 ohm
Power selection 4:
1.5 W - 6667 ohm
IP protection grade:
IP 44
Cabinet/Case Material:
Plastic
Hardware:
Plastic Material
Color:
White - RAL 9003, Black - RAL 9005
Depth:
73 mm / 2.87 inches
Recessed Depth:
66 mm / 2.6 inches
Diameter:
204 mm / 8.03 inches
Cut out diameter:
182 mm / 7.17 inches
Weight:
0.78 kg / 1.72 lbs
|
1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9
|
* Frequency Response (-10 dB)1: 150 Hz - 20 kHz
* Frequency Range (±3 dB)1: 200 Hz - 17 kHz
* Power Capacity:
o 50 Watts Continuous Program Power (2 hrs)
o 25 Watts Continuous Pink Noise (2 hrs)
o 30 Watts Continuous Program Power (100 hrs)
o 15 Watts Continuous Pink Noise (100 hrs)
* Nominal Sensitivity:
o 87 dB (4.0 V, 1 W)
o 84 dB (2.83 V)
* Nominal Coverage Angle3: 140° (+25°/-50°)
* Directivity (Q): 4.7
* Directivity Index (DI): 6.2 dB
* Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
* Rated Impedance: 16 ohms (no transformer taps)
* Recommended High-Pass Frequency: 150 Hz
Transducer
* Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.
Enclosure
* Enclosure Material: High impact polystyrene
* Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
* Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
* Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
* Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
* Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
* Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
* Net Weight (ea): 0.7 kg (1.5 lbs)
* Shipping Weight (pair): 2.0 kg (4.3 lbs)
* Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.
|
Features:
Desinged for systems utilizing an external active subwoofer crossover, separate amplifier channel for the subwoofer loudspeaker. Includes Kevlar-reinforced 300 mm (12 inch) subwoofer driver woofer with 75 mm (3 inch) voice-coil. High power handling of 400 Watts with high sensitivity provides high SPL capability. The innovative EZRail™ feature built into the metal baffle temporarily holds one side of the speaker baffle in place until the installer can affix the baffle to the backcan with screws.
Specifications:
Frequency Response 30 Hz - 4.5 kHz, -10dB Maximum Power Handling 600 Watts, long term 1000 Watts, 2 hrs. (pink noise) Impedance 8 Ohms SPL 121dB continuous, 124dB peak, long term Beamwidth Not Applicable Horizontal Beamwidth Not Applicable Vertical Beamwidth Not Applicable Directivity Not Applicable Construction Kevlar Reinforced Cone Magnet Saturated-gap Voice Coil 3" Dimensions (HxWxD) 14.4 x 14.4 x 6.3" (366 x 366 x 160mm) Weight 17 lb (7.7 kg)
|
- Bipolar arrays evenly disperse sound effects over a broad area
- Dual 1" pure aluminum dome tweeters produce pristine highs
- High dynamic impact with a pair of 3.5" cast basket drivers and two 3.5" pressure-coupled Low Bass radiators
- Integrated dense wood enclosures provide easy installation and consistent high performance
In-Ceiling Or In-Wall, They’re Incredible
The Definitive Technology Architectural Speaker line delivers high performance sound while remaining practically invisible. Intended for use in custom home theaters of the highest quality, UIW RSS III speakers feature non-resonant medite cabinets, producing the tightest bass, clearest midrange and an ideal combination of direct and ambient sound. The result is uniquely immersive surround performance that completely envelops listeners in an expansive, 360-degree sound stage.
Overall
Accessories
- Included Accessories
- (1) Wall Mounting Template
- (1) Paint Mask
- (1) Paintable Grille
- (1) Self Adhering Foam Gasket
Warranty
- Cabinet Warranty5 years
- Drivers Warranty5 years
Shipping Cartons
- Carton 113.5" (34.29 cm) h x 13.5" (34.29 cm) w x 7.25" (18.42 cm) d - 9 lbs (4.08 kg)
In-Wall Speaker
- Qty Included1
- Availability US
- Driver Complement
- (2) 1" (2.54 cm) d (Round) - Tweeter
- (2) 3.5" (8.89 cm) d (Round) - Mid/Woofer
- (2) 3.5" (8.89 cm) d (Round) - Bass Radiator
- Grille Dimensions11" (27.94 cm) h x 9.44" (23.98 cm) w
In-Wall Mount
- ShapeRectangle
- Dimensions9.88" (25.1 cm) h x 8.31" (21.11 cm) w
In-Ceiling Mount
- ShapeRectangle
- Dimensions9.88" (25.1 cm) h x 8.31" (21.11 cm) w
Inputs
- Audio Inputs
- Speaker Inputs(1) Pair of Heavy Duty, Spring Loaded
Audio Quality
- Total Frequency Response40 Hz → 30,000 Hz
- Nominal Impedance Range8 ohms → 4 ohms
- Max Sensitivity (1 watt @ 1 meter)92 dB
Crossover
- A/V Receiver Crossover SettingsSmall (120 Hz)
External Amplifier
- Recommended Amplifier Power Per Channel10 watts → 300 watts
|
-42 Hz to 200 Hz frequency range (-10 dB)
-140 watts continuous program power capacity
-95 dB sensitivity (1W/1m)
-8 ohms nominal impedance
-Steel back-can with removable locking connector
-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W
-Control 19CST 100V taps: 75W, 30W, 15W.
-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)
-Net Weights: Control 19CS = 5.5 kg (12 lb),
-Control 19CST = 6.4 kg (14 lb)
|
Reviews
There are no reviews yet.