Content | The PL6X is a ceiling speakers featuring elegant and innovative design that can be flush-mounted in false ceilings or panels.
Incorporating a 160 mm (6”) loudspeaker.
Both have a coaxial 25 mm (1”) tweeter placed on a bridge support.
The speakers are equipped with a line transformer that enables direct connection to constant voltage systems at 70 V or 100 V.
The multiple sockets on the transformer make it possible to select the output power from among several values.
Installation is quick and easy thanks to a special three-hook system that avoids the need for using screws and pallet or other attachment elements.
Frequency Response (-10dB):
70 Hz ÷ 20000 Hz
System Sensitivity:
92 dB
Peak Power Handling:
48 W PEAK
Recommended Amplifier:
24 W
Input connectors:
Screw Terminals
Output connectors:
Screw Terminals
Constant Voltage Transformer:
70/100 V
Power selection 1:
12 W - 833 ohm
Power selection 2:
6 W - 1667 ohm
Power selection 3:
3 W - 3333 ohm
Power selection 4:
1.5 W - 6667 ohm
IP protection grade:
IP 44
Cabinet/Case Material:
Plastic
Hardware:
Plastic Material
Color:
White - RAL 9003, Black - RAL 9005
Depth:
73 mm / 2.87 inches
Recessed Depth:
66 mm / 2.6 inches
Diameter:
204 mm / 8.03 inches
Cut out diameter:
182 mm / 7.17 inches
Weight:
0.78 kg / 1.72 lbs
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20 - 100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 8-15/16“(22.70cm)
Cut-out Diameter 7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-5/8" (6.67cm)
Overall Depth 3-1/8" (7.94cm)
Shipping/Other
Shipped As each
Product Weight 2.55 lbs. (1.16kgs) each
Total Shipping Weight 3.00 lbs. (1.36kgs)
Speaker Warranty Lifetime Warranty
|
Outer Flange Dimensions | Metric :15-1/2” W x 15-1/2” H | 39.4 x 39.4 cm
Cut Out Dimensions | Metric :14-3/8” W x 14-3/8” H | 36.5 x .36.5 cm
Depth from Flange | Metric :5-7/8” | 14.9 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 5-1/4" cast-basket bass/midrange drivers pressure coupled to two 6-1/2” bass radiators
Frequency Response :22 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :
Recommended Associated Amplifier Power :10 – 250 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Weight | Metric :22 lbs | 10 kg
Warranty :5 Years
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 60Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20-100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 9-5/16“(23.65cm)
Cut-out Diameter 8-3/16“(20.80cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 3-3/8" (8.57cm)
Overall Depth 3-7/8" (9.84cm)
Shipping/Other
Shipped As each
Product Weight 3.25 lbs. (1.47kgs) each
Total Shipping Weight 5.00 lbs. (2.27kgs)
|
* Frequency Response (-10 dB)1: 150 Hz - 20 kHz
* Frequency Range (±3 dB)1: 200 Hz - 17 kHz
* Power Capacity:
o 50 Watts Continuous Program Power (2 hrs)
o 25 Watts Continuous Pink Noise (2 hrs)
o 30 Watts Continuous Program Power (100 hrs)
o 15 Watts Continuous Pink Noise (100 hrs)
* Nominal Sensitivity:
o 87 dB (4.0 V, 1 W)
o 84 dB (2.83 V)
* Nominal Coverage Angle3: 140° (+25°/-50°)
* Directivity (Q): 4.7
* Directivity Index (DI): 6.2 dB
* Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
* Rated Impedance: 16 ohms (no transformer taps)
* Recommended High-Pass Frequency: 150 Hz
Transducer
* Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.
Enclosure
* Enclosure Material: High impact polystyrene
* Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
* Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
* Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
* Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
* Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
* Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
* Net Weight (ea): 0.7 kg (1.5 lbs)
* Shipping Weight (pair): 2.0 kg (4.3 lbs)
* Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.
|
200 mm (8 in) Commercial Series Ceiling Speakers
JBL’s Commercial Series Ceiling Speakers provide excellent performance for paging and background music applications. High sensitivity across the product line provides maximum sound level, even at low tap settings.
- High 96 dB sensitivity
- 5 Watt multi-tap transformer for 100V, 70V and 25V distributed lines
- 120° conical coverage
- Fits CSS-BB8 backcan
Drivers |
200 mm (8 in) Full-Range |
Sensitivity |
96 dB (2k - 6k Hz) |
Frequency Range (-10 dB) Driver/Grille Assembly |
55 Hz – 16 kHz |
Installed in CSS-BB backcan |
100 Hz – 16 kHz |
Coverage Angle |
120° conical |
Driver Continuous Power Handling |
15 Watts |
Transformer Taps |
5W, 2.5W, 1.3W |
Transformer Taps |
5W, 2.5W, 1.3W, 0.7W |
Transformer Taps |
5W, 2.5W, 1.3W, 0.7W |
Transformer Insertion Loss |
1.5 dB Maximum |
Transformer Connection |
Bare wire |
Motor Mass |
200 g (7 oz) |
Safety Agency |
Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849. |
Matching CSS Backcan |
CSS-BB8 (0.15 cu ft) |
Other Compatible Backcans |
MTC-81BB8 (0.26 cu ft)MTC-200BB6 (0.5 cu ft)MTC-300BB8 (1.0 cu ft) |
Bolt Mounting Circle to Backcan |
4 points on 286 mm(11.25 in) diameter |
Cutout DiameterOpen-back |
216 mm (8.5 in) |
In CSS-BB backcan |
295 mm (11.7in) |
Depth (behind grille) |
71 mm (2.8 in) |
Grille Diameter |
327 mm (12.9 in) |
Net Weight (each) |
1.27 kg (2.8 lb) |
Shipping Weight (ea) |
1.94 kg (4.3 lb) |
Included Accessories |
4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
Power Rating |
See transformer taps |
Transformer Taps |
100V Taps - 5W, 2.5W, 1.3W
70V Taps - 5W, 2.5W, 1.3W, 0.7W
25V Taps - 5W, 2.5W, 1.3W, 0.7W |
Maximum SPL (1m) |
103 dB (top 25V/70V/100V tap) |
Input Connectors |
Bare wire |
Color |
White |
Backcan |
formed steel (accessory) |
Baffle/Rim |
Metal |
Ceiling Cutout Size |
216 mm (8.5 in) |
Plenum Usage |
Yes, with accessory backcan |
|
Reviews
There are no reviews yet.