| Content |
The PL8X is a ceiling speakers featuring elegant and innovative design that can be flush-mounted in false ceilings or panels. Incorporating a 200 mm (8”) loudspeaker.
Both have a coaxial 25 mm (1”) tweeter placed on a bridge support.
The speakers are equipped with a line transformer that enables direct connection to constant voltage systems at 70 V or 100 V.
The multiple sockets on the transformer make it possible to select the output power from among several values.
Installation is quick and easy thanks to a special three-hook system that avoids the need for using screws and pallet or other attachment elements.
APPLICATIONS
- • Shopping centres
- • Sport centres
- • Corridors
- • PA systems in general
General Specs
- Two way speaker system with dome tweeter recommended for hi level speech and background-music reproduction
- Music power/RMS: 40/20W
- 8" woofer with coaxial tweeter 1“
- Low impedance (8Ω) or 100V
- Built-in multi-tapped transformer for 100/70V constant voltage connection
- Body in self-extinguishing plastic (UL 94V-0) and front metal grille RAL 9003 White
- Body in self-extinguishing (UL 94V-0) plastic and front metal grille RAL 9003 White
- IP 44 protection
Acoustical Specs
- Type of speaker:Ceiling
- Frequency Response:60Hz ÷ 20 kHz
- Max SPL @ 1m:109dB
- Horizontal coverage angle:80°
- Vertical coverage angle:80°
- Power Handling:20W RMS
- Peak Power Handling:40W PEAK
- System Sensitivity:93dB
- Impedance:8Ω
- Protections:IP 44
TRANSDUCERS
Inputs/Outputs
- Input connector:6 pin terminal block
- Constant voltage:100 V / 70V
- Power Selection:20 - 10 - 5 W- 2.5W (100 V)
Cabinet Specs
- Hardware:Plastic material
- Colour:White
- Grille:Steel
Size/Weight
- Height:88/ 3.46mm/inch
- Width:247 / 9.72mm/inch
- Depth:247 / 9.72mm/inch
- Net weight:1.73 / 4.58kg/lbs
| Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8124):
Component: 100 mm (4 in) Full-Range
Frequency Range (-10 dB): 60 Hz – 18 kHz
Coverage: 130° conical
Sensitivity (2.83V@ 1m): 93 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 20 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 206 mm (8.1 in) diameter round baffle x 89 mm (3.75 in)
depth from back of baffle
Cutout Dimension: 175 mm diameter (6.9 in)
Net Weight: 1.2 kg (2.5 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8124C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums |
1 x 6 ½ ¨ Mineral Filed Polymer Cone
2 x ¾ ¨ Soft Dome Tweeter
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 22 x 7
One Speaker with Dual Inputs
|
Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 5-1/4” bass radiators
Freq. Response: 30 Hz - 30 kHz,
Impedance: 8 Ohms Rec. Ampl. Power: 10 - 250 watts
Inputs: One pair of gold plated spring loaded posts, Finishes: Paintable White
Outer Dimensions: 29.2 x 29.2 x 14.9cm
Cut Out Dimensions: 26.4 x 26.4 x 14.9cm
| Driver Complement |
|---|
| Tweeter | | Quantity | 1 | | Diameter | 1" (2.54cm) | | Type | Pure Aluminum Dome | | Mid / Woofer | | Quantity | 2 | | Diameter | 4 1/2" (11.43cm) | | Type | High Definition Bass/Midrange Driver | | Bass Radiator | | Quantity | 2 | | Diameter | 5 1/4" (13.34cm) | | Type | Planar Bass Radiator |
| Electrical |
|---|
| Audio Inputs | | Speaker Level | 1 Pair (Heavy Duty Spring Loaded) | | Maximum Sensitivity | | 1 watt @ 1 Meter | 92 dB | | Total Frequency Response | | Overall | 30 Hz - 30 kHz | | Nominal Impedance | | Compatible with | 8 ohm | | Crossover | | A/V Receiver Crossover Setting | Small (60 Hz) | | Power Handling | 10 - 250 watts per channel |
| Installation |
|---|
| Cut Out Dimensions | | Height | 10 3/8" (26.35cm) | | Width | 10 3/8" (26.35cm) | | Mounting Depth | 5 7/8" (14.92cm) | | Grille Dimensions | | Height | 11 1/2" (29.21cm) | | Width | 11 1/2" (29.21cm) | | Outer Flange | | Height | 11 1/2" (29.21cm) | | Width | 11 1/2" (29.21cm) | | Placement | | Orientation | In Ceiling | | Cabinet Type | | Speaker Enclosure | Sealed Medite |
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20 - 100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 8-15/16“(22.70cm)
Cut-out Diameter 7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-5/8" (6.67cm)
Overall Depth 3-1/8" (7.94cm)
Shipping/Other
Shipped As each
Product Weight 2.55 lbs. (1.16kgs) each
Total Shipping Weight 3.00 lbs. (1.36kgs)
Speaker Warranty Lifetime Warranty
|
- Bipolar arrays evenly disperse sound effects over a broad area
- Dual 1" pure aluminum dome tweeters produce pristine highs
- High dynamic impact with a pair of 3.5" cast basket drivers and two 3.5" pressure-coupled Low Bass radiators
- Integrated dense wood enclosures provide easy installation and consistent high performance
In-Ceiling Or In-Wall, They’re Incredible
The Definitive Technology Architectural Speaker line delivers high performance sound while remaining practically invisible. Intended for use in custom home theaters of the highest quality, UIW RSS III speakers feature non-resonant medite cabinets, producing the tightest bass, clearest midrange and an ideal combination of direct and ambient sound. The result is uniquely immersive surround performance that completely envelops listeners in an expansive, 360-degree sound stage.
Overall
Accessories
- Included Accessories
- (1) Wall Mounting Template
- (1) Paint Mask
- (1) Paintable Grille
- (1) Self Adhering Foam Gasket
Warranty
- Cabinet Warranty5 years
- Drivers Warranty5 years
Shipping Cartons
- Carton 113.5" (34.29 cm) h x 13.5" (34.29 cm) w x 7.25" (18.42 cm) d - 9 lbs (4.08 kg)
In-Wall Speaker
- Qty Included1
- Availability US
- Driver Complement
- (2) 1" (2.54 cm) d (Round) - Tweeter
- (2) 3.5" (8.89 cm) d (Round) - Mid/Woofer
- (2) 3.5" (8.89 cm) d (Round) - Bass Radiator
- Grille Dimensions11" (27.94 cm) h x 9.44" (23.98 cm) w
In-Wall Mount
- ShapeRectangle
- Dimensions9.88" (25.1 cm) h x 8.31" (21.11 cm) w
In-Ceiling Mount
- ShapeRectangle
- Dimensions9.88" (25.1 cm) h x 8.31" (21.11 cm) w
Inputs
- Audio Inputs
- Speaker Inputs(1) Pair of Heavy Duty, Spring Loaded
Audio Quality
- Total Frequency Response40 Hz → 30,000 Hz
- Nominal Impedance Range8 ohms → 4 ohms
- Max Sensitivity (1 watt @ 1 meter)92 dB
Crossover
- A/V Receiver Crossover SettingsSmall (120 Hz)
External Amplifier
- Recommended Amplifier Power Per Channel10 watts → 300 watts
|
Reviews
There are no reviews yet.