POLK AUDIO TL2 CENTER High Performance Center Speaker 10-125W PER CHANNEL -BLACK-

Driver Complements
Mid/Woofer     2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Midrange    
Tweeter     1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response     90Hz-24kHz
Lower -3dB Limit     125Hz dB
Upper -3dB Limit     20kHz dB
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     91 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     4 1/4" H x 16 11/16" W x 3 13/16" D
(10.79cm H x 42.39cm W x 9.68cm D)
Mounting Options     keyhole slot; .25 x 20 threaded insert
Enclosure Type     Non-resonant curved enclosure with time-alinged driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     4.50 lbs. (2.04kgs)
Shipping unit:     each
Total Shipping Weight     5.50 lbs. (2.49kgs)
Speaker Warranty     5 years parts and labor (original purchaser)

Frequency Response: 32 Hz - 100 KHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 117.8 dBA
Power Handling (RMS): 250 W
Recommended Amplifier Requirements (RMS): 100 - 250 W
Bass Alignment: Twin Ported HiVe II Technology
Sealed Mid-range TLE
Mid / H.F Crossover Frequency: 4000 Hz
Bass Low Pass Crossover Frequency: 550
Drive Unit Complement: 2 x 8 long-throw RDT bass drivers
1 x 4" RDT Mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand (H x W x D): 288 x 800 x 368 mm
(11 5/16 x 31 1/2 x 14 1/2 inch)
Stand External Dimensions -
Including Plinth Feet
(H x W x D): 335 x 610 x 463 mm
(13 13/16 x 24 x 18 1/4 inch)
Weight: 33.5 Kg (73.8lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES

Power handling (watts): 170 (RMS)  
Sensitivity (dB): 90  
Nominal impedance (ohms): 8  
Magnetically shielded
W x H x D (mm): 480 x 178 x 195  
Weight (kg): 9  
Frequency response (Hz): 35 - 45,000  
Connections: Gold-plated 4mm banana socket/binding posts  
Bass port Rear reflex  
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil  
Supplied accessories: Removable grille  
Finish: black ash/ walnut

System Format: 3 Way
Frequency Response: 40 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 113.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 100 - 200 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: L.F - M.F: 800 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment:
2 x 6.5" RST bass/mid-range driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer

External Dimensions excl Stand (H x W x D)

254 x 581 x 333 mm
(10 x 22 7/8 x 13 1/8 inch)
Weight (each) Excluding stands: 18.9 Kg (41.6lbs)

AVAILABLE IN SIX COLOR FINISHES

Driver Complements
Mid/Woofer     2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Midrange    
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response     90Hz-31kHz
Lower -3dB Limit     115Hz
Upper -3dB Limit     28kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     90 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Mounting Options     keyhole slot; one .25 x 20 threaded insert
Enclosure Type     Steel-plate reinforced curved enclsoure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     4.70 lbs. (2.13kgs)
Shipping unit:     each
Total Shipping Weight     5.50 lbs. (2.49kgs)
Speaker Warranty     5 years parts and labor (original purchaser)

2 x 5 ¼ ¨ Polymer Composite Cone
with Rubber Surround
1 x 1¨Silk Polymer Dome Tweeter
Amplifier Power 20-180 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 17 x 50 x 22