Content | Driver Complement
Subwoofer 1 - 10" Diameter (25.40cm)
Direct radiating slot port
Loud & Low Specs(CEA2010)
Low 121.3 db
Ultra 103.9 db
Electrical
Overall Frequency Response 30Hz-140Hz
Lower -3dB Limit 36Hz
Upper -3dB Limit 120Hz
Nominal Impedance 8 ohms
Inputs Heavy duty spring loaded terminals accept up to 12 Gauge wire
Dimensions
Size 60" H x 14" W
(152.40cm H x 35.56cm W)
Overall Depth 3-3/8" (8.57cm)
Shipping/Other
Shipped As each
Product Weight 36.00 lbs. (16.33kgs) each
Speaker Warranty Lifetime Warranty | Amplifier Output: 500 Watts (RMS) 1000 Watts (Peak)
Low Frequency Limit 27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit 40 - 120Hz Variable
Variable Low Pass Filter Alignment Active 4th order 24dB/octave (two-stage filter)
Cabinet Specification: Sealed Cabinet with 25mm M.D.F construction and internal bracing.
Amplifier Classification: Class-D amplifier
Driver Compliment: 1 x 12" C-CAM® sub-woofer driver featuring triple suspension and 3" long throw voice coil.
Dimensions:
(H x W x D) 340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
Weight: (unpacked) 22.56Kg (49.63lbs)
Mains Input Voltage: 100 - 120 Vac, 220 - 240 Vac, 50/60Hz
Input Impedance 20Kohms
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers
| Product Series Subwoofers
Speaker Type Subwoofer
Frequency Range (+/-3 dB) [Hz] 28 - 190
Maximum SPL [dB] 112
Crossover Frequency [Hz] 40 - 120 Hz
Low Frequency Driver 1 x 12" long stroke Polymere Aluminimum
Enclosure Type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 36.0
Max. Amplifier Power Output [RMS watt] 220
Continous IEC Power Output [RMS watt] 170
Input Impedance [Ω] 25K
Connection input(s) Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding No
Recommended Placement Floor
Near wall or corner
Recommended Distance From Wall [cm] > 5
Functions Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W] 250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm] 370 x 340 x 380
Weight [kg] 14.7
Accessories Included Manual
Rubber Bumpers
Spikes M6
Finish Black Ash Vinyl
Light Walnut Vinyl
White Vinyl |
The ASW610 subwoofer presents a very happy medium between the more diminutive ASW608 and the all-out power of the ASW610XP. Its long-throw 250mm driver allows the ASW610 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamming bass, drum kicks, and special movie effects. Deformation is minimised; bass precision, power and enjoyment are maximised.
Description | Active closed-box subwoofer system |
---|
Drive unit | ø250mm (10 in) paper/Kevlar® cone long-throw | Frequency range | -6dB at 20Hz and 25/140Hz adjustable (EQ at A) | Frequency response | ±3dB 27Hz – 40/140Hz adjustable (EQ at A) | Bass Extension | -6dB at 20Hz (position A) |
| -6dB at 25Hz (position B) |
| -6dB at 30Hz (position C) | Amplifier |
| Power output: | 200W | Rated power consumption: | 40W / 0.5W standby | Input impedance: | 33kΩ | Signal / noise: | >90dB | Functions: | Input level (line in) |
| Input level (speaker in) |
| Low-pass filter frequency (line in only) |
| Low-pass filter bypass |
| Bass extension |
| Bass roll-off alignment |
| Auto sense on/standby |
| Phase switch | Inputs: | Line In (RCA Phono) |
| Speaker in (Binding post) |
| 12v trigger (3.5mm jack) |
| Low-pass filter |
| Active 4th-order, variable cut-off frequency | Dimensions | Height: 310mm (12.2 in) not including feet |
| Width: 310mm (12.2 in) |
| Depth: 375mm (14.8 in) including grille and controls | Net weight | 12.5kg (27.6 lb) | Finishes | Black Ash Vinyl |
| Red Cherry Vinyl | |
Pressure vessel enclosure
500W ICEpower® amplifier
Switch mode power supply
Description Active closed-box subwoofer system
Drive unit 2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output: 500W
Rated power consumption: 110W (105W - 100V version)
Input impedance: 100kΩ
Signal / noise: >90dB
Functions: Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (FCC68 4/4)
|
Reviews
There are no reviews yet.