POLK AUDIO OWM5 SURROUND LOUDSPEAKER PAIR

2 x 4 ½ ¨ Dynamic Balance
Polypropylene Driver
1 x 1¨ Silk Dome tweeter
Amplifier Power 20-150 W/ch
Impedance 8 Ohms
Sensitivity 91dB
Dimensions (cm) 16 x 40 x 10

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Midrange     1 - 3-1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter     1 - 1" Diameter (2.54cm)
Dynamic Balance Enhanced Ring Radiator tweeter
Electrical
Overall Frequency Response     45Hz-40kHz
Lower -3dB Limit     55Hz
Upper -3dB Limit     30kHZ
Nominal Impedance     Compatible with 8 Ohm outputs ohms
Recommended Amplifier Power     20-200 w/channel
Efficiency     83 dB
Crossover     Orth Crossover design
Crossover
(mid-high array)     2400Hz
Inputs     Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size     16-1/4" H x 19-23/25" W x 6-3/4" D
(41.27cm H x 50.60cm W x 17.14cm D)
Mounting Options     keyhole slots for wall mounting; pedestal for shelf mounting
Enclosure Type     Sealed
Enclosure Type
(subwoofer)     PowerPort Bass venting
Shipping/Other      
Product Weight     28.90 lbs. (13.11kgs)
Shipping unit:     pair
Total Shipping Weight     62.10 lbs. (28.17kgs)
Speaker Warranty     5 years parts and labor (original purchaser)

Dimensions | (Metric) :25" W x 8-5/16" H x 16" D | 63.5 x 21.1 x 40.6 cm
Driver Complement :One cast basket 10" sub; Two cast basket 6-1/2" upper-bass/midrange drivers; One 1" pure aluminum dome tweeter
Frequency Response :19 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 400 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :150 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts (International)
Inputs :Three sets of five way binding posts: Triwireable; One full range low level RCA
Fuse :
Available Finishes :Piano-Gloss Black
Accessories :Feet (3)
Packaging :One to a carton
Weight | (Metric) :62 lbs | 28.1 kg
Warranty :5 Years; 3 Years for Amplifiers

Driver Complements
Satellites
Mid/Woofer     1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Center
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance composite ring radiator tweeter
Electrical
Overall Frequency
Response     85HZ - 31kHz
Lower -3dB Limit     110Hz
Upper -3dB Limit     28kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     90 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Satellites
Cabinet Size     7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options     Included wall mount bracket; 1/4x20 threated insert
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort bass venting
Center
Cabinet Size     4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Weight     4.70 lbs. (2.13kgs)
Mounting Options     keyhole slots; .25 x 20 threaded inserts
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort Bass venting
Shipping/Other
Total Shipping Weight     20.30 lbs. (9.21kgs)
Speaker Warranty     5 years parts and labor (original purchaser)
Accessories
(comes with)    Satellite wall mount bracket

# The perfect speaker solution when you want big, high definition sound from compact, easy-to-use speakers
# Only 2-1/2 inches (6.4cm) deep for unobtrusive high performance
# Perfect appearance and timbre match for Mythos XTR series front speakers
# Bipolar driver array disperses surround sound over a wide area for enveloping effects
# Two high-definition XTDD 3-1/2 inch mid/bass drivers for life-like clarity
# Wall mount bracket and vertical table support stand included

Dimensions (mounted on wall without bracket) :11-7/8" H x 6" W x 2-1/2" D | 30.1cm H x 15.2cm W x 6.4cm D
Dimensions (mounted on wall with bracket) :11-7/8" H x 6" W x 2-9/16" D | 30.1cm H x 15.2cm W x 6.5cm D
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers in a bipolar array, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :100Hz - 30kHz
Sensitivity :90dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum, sealed
Product weight (without table stand) :
Supplied accessories :Wall mount bracket, adjustable support foot for vertical shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black

System Format: 2 Way
Frequency Response: 60 Hz - 60 kHz
Sensitivity (1W@1M): 87 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 110.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier Requirements (RMS): 50 - 100 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: Bi-Pole: 2.3 kHz
Di-Pole: 2.6 kHz
Drive Unit Compliment: 1 x 6.5" RST bass driver
2 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
2 x 1" gold dome C-CAM Tweeter
External Dimensions excl Stand (H x W x D)

310 x 390 x 160 mm
(12 13/16 x 15 3/8 x 6 5/16 inch)
Weight (each) Excluding stands: 11.9 Kg (26.1 lbs)

AVAILABLE IN SIX COLOR FINISHES