| Content |
2 x 5 ¼ ¨ Polymer Composite Cone
with Rubber Surround
1 x 1¨Silk Polymer Dome Tweeter
Amplifier Power 20-180 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 17 x 50 x 22
|
Tweeter 1¨Silk Dome Dynamic Balance x1
Mid/Woofer 6 ½¨Dynamic Balance Bi-Laminatex2
Frequency Response 48Hz - 25kHz
Nominal Impedance 8 Ohms
Rec. Amplifier Power 20-150 W/Channel
Sensitivity 91dB
Dimensions (cm) 20.32 x 55.88 x 22.86 |
The perfect complement to a full SX-series surround sound speaker set, the Cambridge Audio SX70 is the natural choice.
CRISP AND CLEAR SOUND FOR ARTICULATE VOCALS
Featuring a silk dome tweeter, the Cambridge Audio SX70 offers a smooth response that\'s essential for clear, accurate dialogue. Even during intense scenes in action movies, the dialogue can still clearly be heard.
TWIN WOOFERS FOR BROAD STAGING
Using two woofers, placed either side of the tweeter, gives the SX70 a wide soundstage, meaning that it connects up with your front speakers seamlessly. Now, when a jet aircraft rushes across the screen, the sound will follow from left to centre to right without a break.
TOP QUALITY CONSTRUCTION FOR LASTING APPEAL
Made from dense, MDF (Medium Density Fibreboard) rather than flimsy chipboard, the SX70s are built to last. That solid construction also has a knock-on effect in helping to improve the sound quality through higher cabinet rigidity. Other neat design features that we love include the recessed drive units with hidden fixing bolts, making sure the front the panel looks every bit as smooth as the sound.
PART OF THE SX-SERIES AND SO IDEAL FOR SURROUND SOUND SYSTEMS
With floorstanding and standmount sound speakers available, the Cambridge Audio SX70 is ideal as part of a surround sound speaker system. With a similar sonic balance to the other SX-series speakers you get a smooth, uniform sound right the way around your room for a totally enveloping sound.
| Magnetically Shielded |
Are they magnetically shielded? Allows speaker to be placed near a CRT TV/Monitor or sensitive magnetically stored data without the risk of damage. |
|
| Sensitivity (dB) |
The higher this figure is the easier the speaker is to drive and, hence, requires a less powerful amplifier |
85 |
| Impedance (ohms) |
Resistance. A standard figure is 8ohms |
8 |
| Bi-wireable |
Is it bi-wirable? Separate earthing cables for tweeter and woofer units - gives a more precise sound when used with bi-wire cable |
|
| Power Rating (Watts) |
Maximum power output long term/short term (RMS) |
100 |
| Dimensions |
Dimensions of speaker cabinet (W x D x H) in mm |
360w x 246d x 138h |
| Weight |
Weight of speaker, unboxed, in KG |
4 |
| Black |
Does the speaker come in a black finish? |
|
| Wood |
Does the speaker come in a wood or wood style finish? |
|
| Other Colour |
Does the speaker come in another coloured finish? |
|
| Freq Response (Hz) |
The lower the first figure the deeper the bass should be |
65 - 20,000 |
| Speaker Enclosure Type |
Type of speaker enclosure. Infinite baffle cabinets are sealed and so are often less fussy about placement. Usually they do require a little more power to drive, though. Bass reflex speakers are usually more efficient than infinite baffle designs but may require more care in terms of placement. Rear port designs, in particular, usually need at least 15-30cm (6 - 12 inches) between them and the wall behind, for a balanced bass response. ABR = Auxcillary Bass Radiator (looks like a standard bass cone but without power) |
Infinite baffle (sealed) |
|
HF Unit: 25mm neodymium tweeter with high dispersion diaphragm. Ferrofluid cooled and damped. Magnetically shielded. Exclusively Profiled.
MF Unit: 110mm mid range driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.
LF Unit: 110mm mid/bass driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.
Power Handling: 150 watt max
Overall Frequency Response: 55Hz – 23kHz
Sensitivity: 90dB
Impedance: 8 ohms
Cabinet: Real wood veneered. 15mm MDF wrap. Dual chamber. High power, back firing, low turbulence bass reflex port. 22mm front baffle
Terminals: Gold-plated 4-way binding posts
Dimensions: WxHxD 450 x 180 x 297 mm
Weight: (exc packaging) 8kg each
|
Dimensions | Metric :17" W x 6-1/2" D x 6-1/2" H | 43.2 x 16.5 x 16.5 cm
Frequency Response :42 Hz – 30 kHz
Driver Complement :One 1" pure aluminum dome tweeter; Two 5-1/4" BDSS upper bass/midrange drivers; Two 5-1/4" pressure coupled bass radiators
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 250 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black only
Accessories :Leveler Foot; Two ¼ 20 insert cover plugs
Mounting Options :Horizontal: On Shelf with included leveling foot; Equipped with two ¼ 20 sized threads to accommodate on wall mounting brackets (available separately)
Packaging :One to a carton
Weight | Metric :10 lbs | 4.5 kg
Warranty :5 Years
|
Frequency Response: 45Hz- 100kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 112.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 60 - 200 W
Bass Alignment: Rear Ported HiVe II Technology
Mid / H.F Crossover Frequency: 1800 Hz
Bass Low Pass Crossover Frequency: 250 Hz
Drive Unit Complement: 2 x 6 1/2" RDT bass/mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand: Width: 583mm (22 15/16 inches)
Height: 225mm (8 7/8 inches)
Depth: 291.2mm (11 7/16 inches)
Stand Dimensions: Width: 610mm (24 inches)
Height: 335mm (13 13/16 inches)
Depth 463mm (18 1/4 inches)
Weight: 19 Kg (41.8lbs)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual AVAILABLE IN THESE COLOR FINISHES ![colors]( "colors")
|
Reviews
There are no reviews yet.