Content |
1 x 8 ¨ Dynamic Balance Composite
Cone
Auto On/Off
Port Type Downword Firing
Cont. Power 150watt
Dynamic Power 300 Watts
Dimensions (cm) 30 x 28 x 33
| For big sound in smaller spaces, you canʼt beat the ASW608, the most compact of the 600 Series subwoofers.
Its long-throw 200mm driver allows the ASW608 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamm
Description |
Active closed-box subwoofer system |
Drive unit |
ø200mm (8 in) paper/Kevlar® cone long-throw |
Frequency range |
-6dB at 23Hz and 25/140Hz adjustable (EQ at A) |
Frequency response |
±3dB 32Hz – 40/140Hz adjustable (EQ at A) |
Bass Extension |
-6dB at 23Hz (position A) |
|
-6dB at 28Hz (position B) |
|
-6dB at 36Hz (position C) |
Amplifier |
Power output: 200W |
Rated power consumption: |
40W/ 0.5W standby |
Input impedance: |
33kW |
Signal / noise: |
>90dB |
Functions: |
Volume level – line in |
|
Volume level – speaker in |
|
Low-pass filter frequency – line in only |
|
Low-pass filter bypass |
|
Bass extension |
|
Bass roll-off alignment |
|
Auto sense on/standby |
|
Phase switch |
Inputs: |
Line In (RCA Phono) |
|
Speaker in (Binding post) |
|
12v trigger (3.5mm jack) |
|
Low-pass filter |
|
Active 4th-order, variable cut-off frequency |
Dimensions |
Height: 260mm (10.2 in) not including feet |
|
Width: 260mm (10.2 in) |
|
Depth: 330mm (13 in) including grille and controls |
Net weight |
8.85kg (19.5 lb) |
Finishes |
Black Ash Vinyl |
|
Red Cherry Vinyl |
|
Dimensions | Metric :10-1/4” W x 10-1/4” D x 10-1/4” H | 26.0 x 26.0 x 26.0 cm
Driver Complement :One high-definition 7-1/2" long throw woofer, pressure coupled to two 7-1/2” low bass radiators
Frequency Response :16 Hz – 200 Hz
Internal Amplifier Power :650 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :5 way binding posts
High Level Outputs :5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz:
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :25 lbs | 11.3 kg
Warranty :5 Years; 3 Years for Amplifiers |
Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Low Frequency Limit: 27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit: 40 - 120Hz Variable
Power Output: 500W RMS (1000W Peak)
Low Pass Filter Alignment: Active 4th order 24dB/Octave (2nd stage filter)
Cabinet Specification: 25mm construction and internal bracing
Cabinet Alignment: sealed cabinet
Driver Complement: 1 x 12" C-CAM® sub woofer driver featured triple suspension and ling throw 3" voice coil
External Dimensions:
(H x W x D)
inc. amp & driver 340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
External Dimensions:
(H x W x D)
inc. feet & grille 375mm (15“) high with feet
430mm (16 15/16“) deep
inc amp & grille
Mains Input Voltage Specification: 110 - 120 Vac / 220 - 240 Vac 50/60Hz
Individual Weight: 22.56 Kg (49.63 lb)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Outer Flange Dimensions | (Metric) :15-1/2” W x 26-3/16” H | 39.4 x 66.5 cm
Cut Out Dimensions | (Metric) :14-3/8” W x 25-1/8” H | 36.5 x 63.8 cm
Depth from Flange | Metric :4” | 10.2 cm
Driver Complement :One 13" Long-Excursion Woofer coupled to a 13" infrasonic Radiator
Frequency Response :14 Hz – 200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :45 lbs | 20.4 kg
Warranty :5 Years
|
Reviews
There are no reviews yet.