Content |
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 60Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20-100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 9-5/16“(23.65cm)
Cut-out Diameter 8-3/16“(20.80cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 3-3/8" (8.57cm)
Overall Depth 3-7/8" (9.84cm)
Shipping/Other
Shipped As each
Product Weight 3.25 lbs. (1.47kgs) each
Total Shipping Weight 5.00 lbs. (2.27kgs)
|
Outer flange (grille) diameter | Metric :9-3/4" | 24.76 cm
Cut out diameter | Metric :8-3/4" | 22.2 cm
Depth from flange | Metric :3-7/8" | 9.77 cm
Driver complement :1-inch (25mm) pivoting Aluminum dome tweeter axially aligned with a 8" (20 cm) BDSS bass/midrange driver
Frequency response :26Hz - 30kHz
Impedance :4 - 8 Ohms
Sensitivity :90 dB
Recommended associated amplifier power :10 - 225 WPC
Inputs :One pair of gold plated heavy-duty spring-loaded terminals
Available finishes :Paintable white (see manual for painting instructions)
Packaging :One speaker to a carton
Weight | Metric :4.8 lb. | 2.14 kg |
- Frequency Range (-10 dB) : 34 Hz – 18 kHz In half space (in ceiling)
- Frequency Response (±3 dB) : 47 Hz – 16 kHz In half space (in ceiling)
- Coverage Pattern : 90° conical, broadband (Avg 1k - 16kHz) Average 1 kHz to 10 kHz
- Directivity Factor (Q) : 8.7 (1k - 16kHz)
- Directivity Index (DI) : 9.4 dB (1k - 16kHz)
- Long-Term System : 250 W (1000 W peak), 2 hrs
- Power Rating, IEC3 : 150 W (600 W peak), 100 hrs
- Sensitivity (2.83V@ 1m) : 94 dB measured half-space, 99 dB computed for competitive comparison
- Maximum SPL6 : 118 dB cont ave (124 dB peak)
- Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
- Nominal Impedance : 8 ohms
- Transducer Low Frequency Driver : Kevlar reinforced cone, 50 mm (2 in) voice coil.
- Transducer High Frequency Driver : JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
- Input Connector : Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
- Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in) on 321C
- Net Weight : 16.0 lbs. (7.3 kg)
- Shipping Weight : 19.4 lbs. (8.8 kg)
|
Features:
Desinged for systems utilizing an external active subwoofer crossover, separate amplifier channel for the subwoofer loudspeaker. Includes Kevlar-reinforced 300 mm (12 inch) subwoofer driver woofer with 75 mm (3 inch) voice-coil. High power handling of 400 Watts with high sensitivity provides high SPL capability. The innovative EZRail™ feature built into the metal baffle temporarily holds one side of the speaker baffle in place until the installer can affix the baffle to the backcan with screws.
Specifications:
Frequency Response 30 Hz - 4.5 kHz, -10dB Maximum Power Handling 600 Watts, long term 1000 Watts, 2 hrs. (pink noise) Impedance 8 Ohms SPL 121dB continuous, 124dB peak, long term Beamwidth Not Applicable Horizontal Beamwidth Not Applicable Vertical Beamwidth Not Applicable Directivity Not Applicable Construction Kevlar Reinforced Cone Magnet Saturated-gap Voice Coil 3" Dimensions (HxWxD) 14.4 x 14.4 x 6.3" (366 x 366 x 160mm) Weight 17 lb (7.7 kg)
|
Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 5-1/4” bass radiators
Freq. Response: 30 Hz - 30 kHz,
Impedance: 8 Ohms Rec. Ampl. Power: 10 - 250 watts
Inputs: One pair of gold plated spring loaded posts, Finishes: Paintable White
Outer Dimensions: 29.2 x 29.2 x 14.9cm
Cut Out Dimensions: 26.4 x 26.4 x 14.9cm
Driver Complement |
---|
Tweeter | Quantity | 1 | Diameter | 1" (2.54cm) | Type | Pure Aluminum Dome | Mid / Woofer | Quantity | 2 | Diameter | 4 1/2" (11.43cm) | Type | High Definition Bass/Midrange Driver | Bass Radiator | Quantity | 2 | Diameter | 5 1/4" (13.34cm) | Type | Planar Bass Radiator |
Electrical |
---|
Audio Inputs | Speaker Level | 1 Pair (Heavy Duty Spring Loaded) | Maximum Sensitivity | 1 watt @ 1 Meter | 92 dB | Total Frequency Response | Overall | 30 Hz - 30 kHz | Nominal Impedance | Compatible with | 8 ohm | Crossover | A/V Receiver Crossover Setting | Small (60 Hz) | Power Handling | 10 - 250 watts per channel |
Installation |
---|
Cut Out Dimensions | Height | 10 3/8" (26.35cm) | Width | 10 3/8" (26.35cm) | Mounting Depth | 5 7/8" (14.92cm) | Grille Dimensions | Height | 11 1/2" (29.21cm) | Width | 11 1/2" (29.21cm) | Outer Flange | Height | 11 1/2" (29.21cm) | Width | 11 1/2" (29.21cm) | Placement | Orientation | In Ceiling | Cabinet Type | Speaker Enclosure | Sealed Medite |
| Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8124):
Component: 100 mm (4 in) Full-Range
Frequency Range (-10 dB): 60 Hz – 18 kHz
Coverage: 130° conical
Sensitivity (2.83V@ 1m): 93 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 20 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 206 mm (8.1 in) diameter round baffle x 89 mm (3.75 in)
depth from back of baffle
Cutout Dimension: 175 mm diameter (6.9 in)
Net Weight: 1.2 kg (2.5 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8124C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums |
Reviews
There are no reviews yet.