Polk Audio TSx330T Loudspeaker Tower 20-150W 8Ω (pair)

Tweeter 1¨Silk/Polymer Dynamic Balance x1
Mid/Woofer 6 ½¨Dynamic Balance Bi-Laminatex2
Frequency Response 33Hz - 25kHz
Nominal Impedance 8 Ohms
Rec. Amplifier Power 20-150 W/Channel
Sensitivity 90db
Dimensions (cm)  93.98 x 20.32 x 30.48

System Format:    3 Way Frequency Response:    30 Hz - 60 kHz Sensitivity (1W@1M):    90 dB Nominal Impedance:    8 ohms Maximum S.P.L (Per pair in room):    116.8 dBA Power Handling (RMS):    200 W Recommended Amplifier Requirements (RMS):    100 - 200 W Bass Alignment:    Bass reflex. HiVe port system Crossover Frequency:    L.F - M.F: 790 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment:    2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 1060 x 210 x 330 mm (41 3/4 x 8 1/4 x 13 inch) Weight (each) Excluding stands:    27.2 Kg (59.9 lbs)

Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak

Dimensions | Metric :6" W x 6" D x 48-1/2" H (with base) | 15.2 x 15.2 x 123.2 cm
Packaging :One to a carton
Height with Base | Metric :48-1/2" | 123.2 cm
Base Dimensions | Metric :10" W x 9-3/4" D | 25.4 x 24.8
Driver Complement :One 1" pure aluminum dome tweeter; Two 5-1/4" high definition midrange drivers; Two 5-1/4" high definition bass drivers; Two 5-1/4" pressure coupled bass radiators
Enclosure :Aircraft grade extruded aluminum
Frequency Response :20 Hz – 30 kHz
Recommended Associated Amplifier Power :20 – 250 watts
Available Finishes :Gloss Black
Weight | Metric :37 lbs | 16.8 kg
Impedance :Compatible with 8 Ohms outputs
Inputs :One pair of 5 way binding posts
Warranty :5 Years
A/V Receiver Crossover Setting :60 Hz
Accessories :Plastic Foot Tippers; Isolation Spikes
Sensitivity :92 dB
Base :Tempered Glass

Dimensions | Metric :42" H x 8" W x 12-1/4" D | 106.7 x 20.3 x 31.1 cm
Driver Complement :Two 1" aluminum dome tweeters; Two 6-1/2" high definition bass/midrange drivers
Frequency Response :20Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of 5 way binding posts
Available Finishes :Piano-Black Gloss
Accessories :Feet; Isolation Spikes
Packaging :One to a carton
Weight | Metric :57 lbs | 25.9 kg
Warranty :5 Years

System Format:    3 Way
Frequency Response:    35 Hz - 60 kHz
Sensitivity (1W@1M):    89 dB
Nominal Impedance:    8 ohms
Maximum S.P.L
(Per pair in room):    114.5 dBA
Power Handling (RMS):    150 W
Recommended Amplifier Requirements (RMS):    100 - 150 W
Bass Alignment:    Bass reflex. HiVe port system
Crossover Frequency:    L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment:    2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands:    22.2 Kg (48.9 lbs)