HK Power Works RS152X 1×15 inch + Horn 300W (Black)

HK AUDIO RS 152 X POWERWORKS

HK AUDIO RS 152 X POWERWORKS, 15" 2 way multi funktion box 300 W program., 8 ohms,460 x 630 x 410 , Weight 22 kg

bold low end in a small housing. Great for keyboards, DJs or as a handy all-in-one PA.Also usable as stage monitor.

• Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
• Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
• Stainless steel bracket
• 15" high-output LF transducer with 2" voice coil
• RCF Precision Neo 1" Compression Driver with 1.5" voice coil
• 90° x 60° constant directivity horn
• 10° X 20° enclosure sides for array configurations
• Active Mosfet Compression Driver Protection
• 12 brass suspension points (M10)
• Line transformer

• Frequency Response -10 dB: 75 Hz ÷ 20 kHz
• Max SPL @ 1m: 129 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 60°
• Directivity index; Q: 13.3
• System Sensitivity: 98 dB
• Nominal Impedance: 16 Ω
• Power Handling: 300 W
• Peak Power Handling: 1200 W
• Protections: dinamyc
• Crossover frequencies: 1300 Hz

• Compression Driver: 1" HF driver, 1.5" voice coil
• Nominal Impedance: 8 Ω
• Input Power Rating: 25 W AES
• Sensitivity: 108 dB
• Woofer: 15" woofer, 2.5" voice coil
• Nominal Impedance: 16 Ω
• Input Power Rating: 250 W AES
• Sensitivity: 98 dB

• Input connector: 4-adriges Neopren Kabel, 5m
• Constant voltage transformer: 70/100 V
• Power Selection: 70V/60W, 30W , 100V/120W, 60W

• Cabinet Material: Polyethylene rotomoulded
• Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
• Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
• Colour: grey

• Height: 463 / 18.22 mm/inch
• Width: 463 / 18.22 mm/inch
• Depth: 433 / 17.04 mm/inch
• Net Weight: 19.4 / 42.76 kg/lbs

The Electro-Voice TX1152 Tour-X is a high power, high sensitivity, 15" 2-way PA loudspeaker system to use when high-quality sound reinforcement is required in a lightweight package.

The TX1152 PA speaker uses a DH3, high output 1.25" titanium compression driver, coupled to a Constant Directivity 60 degree x 40 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in medium throw applications.

The SMX2151 15" woofer has an FEA optimized magnet structure and a shorting ring for ultra low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.

The TX1152 has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1152 to be suspended in a various positions. The recessed input panel with dual NL4 connectors panel keeps the connectors hidden, while allowing the TX1152 to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.

Club Series V
Gigging bands, mobile DJs and houses of worship have helped make the first four generations of Yamaha Club Series Speakers incredibly popular. The refinements of generation V continue this success story: larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual Speakon® and ¼" connectors. Once again, with professional features, excellent sonic performance and great value, Club Series loudspeakers deliver premium quality night after night.

Yamaha has a long history of both making and reproducing music. The Club series V loudspeakers represent the latest in our continuing effort to provide the professional features and sound quality you've come to expect and deserve.

Built in the United States, these loudspeakers are designed to provide years of service. high power handling and excellent response have made Club Series loudspeakers the perfect choice for more than 16 years. Whether playing in a band, DJing, orupgrading the sound system at your church or school, with an expanded lineup of over twenty models to choose from, you're sure to find the right loudspeaker. Have a look at what goes into their construction -- Cabinets are constructed of high quality particleboard, chosen for its high strength and elasticity, consistent void free makeup and light weight. Another great benefit of this material is its environmental friendliness. Made from southern yellow pine, this material is both abundant and quickly renewable. Accurate CNC routing machines are used to cut every part, assuring consistency with tolerances of one ten thousandth of an inch. Skilled technicians assemble each cabinet by hand, rejecting any defects. Whether covered in durable carpet or the elastomeric spray coating, heavy steel handles and sturdy pole sockets make moving and positioning easy.

The drivers, or speakers in these cabinets, are custom made my Eminence Speaker Corporation® to Yamaha's exacting tolerances. Woofers share design features like high strength curvilinear cones and Dupont KaptonTM voice coil formers. Oxygen-free copper voice coils and oversize strontium ferrite magnets are also used to provide high power handling and long life. The 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex and help dissipate heat. The compression driver that generates the high frequency sound uses a pure titanium diaphragm. This 2" dome is one of the largest in its class, allowing for very high output and low distortion, without the aid of cooling fluids. It's mated to a 90° x 40° custom designed CD (constant directivity) horn with excellent dispersion and response.

Crossover networks that divide the signal going to the woofer and compression driver are constructed with oversized coils, high voltage capacitors, and power resistors designed to provide the best possible sound quality and minimize loss. Overload protection is also included to protect the components.

Connections on these loudspeakers are dual Neutrik Speakon® ¼ jacks for the highest possible strength and current capacity. Two of each connector makes it easy to "daisy chain," or add speakers.

Club V loudspeakers with the C prefix are coated with a heavy-duty elastomeric spray coating. Designed as an installation alternative to the carpeted S versions, they can easily fit any decor. The finish is very tough, and readily paintable to match surroundings. The steel grilles are foam-lined with acoustically transparent material to provide a more subdued appearance.

C215V
Two 15" cast frame woofers
2000-watt peak power handling
90 x 45 degree CD horn
Perfect where high sound pressure levels are required

Features:

• Tough, paintable exterior coating
• Dual cast-frame 15" drivers
• Frequency response: (-10dB) 42Hz - 16kHz
• 1,000W program handling, 2,000W peak
• Sensitivity: 99dB
• 20“W x 46“H x 24“D
• 101 lbs.

Description:

The SX18 is a switchable 3 way active, 2 way passive, arrayable loudspeaker. Designed to be used as the main enclosure for small to mid-sized venues or as a supplemental cabinet for large scale sound reinforcement, this enclosure provides high sound pressure levels in a small, lightweight package. Adamson?s Proprietary Kevlar drivers and internal crossovers are employed throughout the SX18 enclosure and its integral fly hardware makes installation of the product fast and effective. Moving the SX18 is easy and efficient with the supplied dolly board. A flexible, high powered enclosure, the SX18 is suited for a wide variety of applications.

Applications:

Live Concert Reproduction
Side Fill Monitoring
Near Field Applications
Theatres
Houses of worship
Dance Clubs

Features:

Kevlar 18" bass and 10" midrange Drivers
1.5" High Frequency Compression Driver
2-Way Bi-Amp/3-Way Tri-amp Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points
Supplied Dolly Board
Durable, Dual Component Finish
Honeycomb Punched, Steel Grille
Roadworthy Construction

Weight: 67 kg

The P6215 is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for very high output and longer throw applications.

The high-frequency section is a constant directivity CMD horn loaded to a 1.3” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low frequency transducer is a 15” woofer with a 3” voice coil. The cabinet is equipped with 12 x M10 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. P6215 meets the requirements of IP 55 code (International Protection Rating)