Content |
Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:5" Aramid Glass Composite woofer
Mid-Frequency:N/A
High-Frequency:1" soft dome tweeter
Frequency Response:45Hz - 35kHz
Max Peak SPL:106 dB
Amplifier Class:Class A-B
Power Output:50W
High Frequency:20W
Mid-Frequency:N/A
Low Frequency:30W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:-2dB, -1dB, 0, +1dB
System Volume:(-30dB - +6dB)
Indicators:Power
Input Connectors:
Unbalanced RCA
Balanced 1/4" TRS
Balanced XLR
Enclosure Construction:MDF
Finish:Black vinyl wrap
Port Configuration:Front firing slot port
Dimensions (D x W x H): 9.7" (246mm) x 7.4" (188mm) x 11.2" (284mm)
Weight:13 Lbs. (5.9 Kg.)
|
DM-2100: 2.1-ch Speaker System
Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.
- Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
- Powered bass reflex speakers with 15 watts per side and flat frequency response
- Active subwoofer with 50-watt amplifier for increased low end
- Front-mounted controls convenient located on right speaker
- Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
- Sleek black wooden cabinets with magnetic shielding
Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight
Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches
|
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
Acoustical Specifications |
---|
Frequency Response -3 dB: | 40 Hz | ÷ 20 kHz | Max SPL: | 114 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 70° | | Compression Driver: | 1" neo, metal dome | | Woofer: | 6.5" neo, ICC technology | |
INPUT/OUTPUT SECTION |
---|
Input connectors: | combo XLR/Jack | | Input sensitivity: | -6/+6 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1900 Hz | | Protections: | thermal, excurs., rms | | Limiter: | soft limiter | | Controls: | bass tilt, roll-off, treeble tilt, desktop, DSP controlled | |
AMPLIFIER SPECIFICATIONS |
---|
High frequencies: | 100 Watts | | Low frequencies: | 200 Watts | | Cooling: | convection | | Connections: | vde | |
CABINET |
---|
Cabinet Material: | die cast aluminum | | Hardware: | orientation adjustable stand | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 370/14.5 mm/inch | | Width: | 265/10.4 mm/inch | | Depth: | 250/9.8 mm/inch | | Net Weight: | 10.5/23 Kg/Lbs |
|
The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.
Specifications Frequency response (+/-3dB) : | 55Hz - 28kHz | Maximum SPL : | 107dB SPL (peak @ 1m) |
Input :
|
Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA
| HF amplifier stage : | 50W RMS, class AB | LF amplifier stage : | 80W RMS, class AB |
Electric supply :
|
Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord
|
Adjustment :
|
- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch
|
Indicators :
|
Power ON / OFF LED
Standby / ON LED
Audio Clip LED
| Woofer : | 5" Focal drive unit, Polyglass cone | Tweeter : | Aluminum/Magnesium inverted dome Focal tweeter | Shielding : | Integral by cancellation magnet | Construction : | Reinforced and damped Aluminum cabinet |
Finish :
|
Black powder cabinet
| Dimensions with spikes : | 289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“) | Dimensions with table stand : | 299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“) | Net weight : | 7.7kg - (17lb) |
|
Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB
Benefit: Sound true to actual recording
Benefit: Any pair of speakers is a matched pair
Active Technology
2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W
Benefit: Precise dividing slope, correct phase, and low distortion
Benefit: Minimal chance of speaker damage due to overdriving
Servo Loop Woofer Technology
Electronic control and dampening
Benefit: Speaker output is as true to incoming signal as possible
Frequency Response Controls
80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)
Benefit: Excellent response in a variety of acoustic environments
Wide Sweet Spot
Custom-designed die-cast wave guide
Benefit: User hears the same thing across a wider range of motion
3-Position Acoustic Space Switch
Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement
Benefit: As close-to-flat performance as possible regardless of placement in room
Applications
Professional Recording Studios
Home and Project Studios
Film (THX) and Post Production Studios
Home Theater Installations
Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz
| Behringer MS-16 2x8W 2-Way Active Personal Monitor System
The Behringer MS16 Studio Monitors feature an active 2-way design with powerful 4'' woofers and 1.5'' tweeters, powered by two 8 watt amplifiers. Offering two line inputs and a microphone input, the Behringer MS16 monitors are perfect for both home studios and general multimedia applications.
Full Description
Compact and Ideal For Home Studio
The Behringer MS16 Studio Monitors, Pair are the ideal studio monitor for your home studio project. Whether that be mixing, producing, or even listening the MS16 Studio Monitors turn your computer into a personal home studio. Its powerful 4" woofers provide thumping bass, whilst the high resolution tweeters provide clean high frequencies. Also featured are dedicated volume, bass and treble controls for extra flexibility. They also make excellent add-on speakers for electronic keyboards and playing a live performance.
Input Connections
The MS16 Studio Monitors feature multiple input options featuring a 1/8" stereo input for connecting up CD, MD and MP3 players. The dual RCA jacks allow for stereo keyboard modules and tape decks. Furthermore there is a 1/4" inch to allow connections for a dynamic microphone or electric guitar enabling you to sign or play along with prerecorded tracks.
Features
- Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring, etc.
- Powerful 4'' woofers and high-resolution tweeters powered by two 8 watt amplifiers
- Dedicated Volume, Bass and Treble controls for more flexibility
- Stereo RCA inputs for sound cards, keyboards, etc. that can be used simultaneously with a second stereo source (e. g. CD/MD player) through 1/8'' TRS stereo input
- Separately adjustable 1/4'' TRS microphone input mixable with stereo inputs for playback and vocal monitoring applications
- 1/8'' TRS headphone connector with auto-mute loudspeaker function
- Magnetically shielded for placement near computer monitors
- Designed and engineered in Germany
Specifications
- Woofer: 4''
- Tweeter: 1.5''
- Output Power: 2 x 8 Watts
- Frequency Response: 80Hz - 20kHz
- Speaker Impedance: 4?
- Input 1:
- Connector: 1/8'' TRS Stereo
- Input Level: -10dBm, 10k?
- Input 2:
- Connector: RCA Stereo
- Input Level: -10dBm, 10k?
- Mic Input:
- Connector: 1/4'' TRS
- Input Level: -50dBm, 50?
- Dimensions: 9.5'' x 5.5'' x 6'' / 241mm x 140mm x 150mm (H x W x D)
- Weight: 4kg
|
Reviews
There are no reviews yet.