If space is at a premium, or if you want the ultimate in portability, consider the ultra-compact Eris E4.5. It may be the size of a computer speaker, but this mighty mite delivers professional audio quality, thanks to a 4.5-inch, Kevlar low-frequency driver; a low-mass, 1 inch, silk-dome tweeter with protective grille; and Class AB […]
If space is at a premium, or if you want the ultimate in portability, consider the ultra-compact Eris E4.5. It may be the size of a computer speaker, but this mighty mite delivers professional audio quality, thanks to a 4.5-inch, Kevlar low-frequency driver; a low-mass, 1 inch, silk-dome tweeter with protective grille; and Class AB amplification. Each speaker is powered by a 25W Class AB amplifier-plenty of juice for a small speaker. The E4.5 ranges from 70 Hz up to 20 kHz, and at 6.42 x 9.45 x 7.09 inches (163 x 241 x 180 mm), you can shoehorn this little beauty into almost any studio space.
Eris
E4.5
Inputs
1- Stereo 1/8″
2- Balanced ¼” TRS
2- Unbalanced RCA
Performance
Frequency Response
70 Hz – 20 kHz
Crossover Frequency
2.8 kHz
LF Amplifier Power
25W/speaker
HF Amplifier Power
(not biamped)
Peak SPL (@ 1 meter)
100 dB
LF Driver
4.5″ Kevlar®
HF Driver
1″ silk dome
Input Impedance
10 kΩ
User Controls
Volume Range
A-type taper
MF Control
Variable (-6 to +6 dB)
HF Control
Variable (-6 to +6 dB)
Low Cut
Flat, 80 Hz, 100 Hz
Acoustic Space
Flat, -2 dB, -4 dB
Protection
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
Power
100-120V ~50/60 Hz or 220-240V ~50/60 Hz
Cabinet
Vinyl-laminated, medium-density fiberboard
Physical
Width
6.42″ (163 mm)
Depth
7.09″ (180 mm)
Height
9.45″ (241 mm)
Weight
13 lb. (5.9 kg)
Weight
5.90 kg
Reviews
There are no reviews yet.
Be the first to review “PRESONUS ERIS E-4.5 Active Studio Monitors 50W -PAIR-” Cancel reply
If space is at a premium, or if you want the ultimate in portability, consider the ultra-compact Eris E4.5. It may be the size of a computer speaker, but this mighty mite delivers professional audio quality, thanks to a 4.5-inch, Kevlar low-frequency driver; a low-mass, 1 inch, silk-dome tweeter with protective grille; and Class AB amplification. Each speaker is powered by a 25W Class AB amplifier-plenty of juice for a small speaker. The E4.5 ranges from 70 Hz up to 20 kHz, and at 6.42 x 9.45 x 7.09 inches (163 x 241 x 180 mm), you can shoehorn this little beauty into almost any studio space.
Eris
E4.5
Inputs
1- Stereo 1/8"
2- Balanced ¼" TRS
2- Unbalanced RCA
Performance
Frequency Response
70 Hz - 20 kHz
Crossover Frequency
2.8 kHz
LF Amplifier Power
25W/speaker
HF Amplifier Power
(not biamped)
Peak SPL (@ 1 meter)
100 dB
LF Driver
4.5" Kevlar®
HF Driver
1" silk dome
Input Impedance
10 kΩ
User Controls
Volume Range
A-type taper
MF Control
Variable (-6 to +6 dB)
HF Control
Variable (-6 to +6 dB)
Low Cut
Flat, 80 Hz, 100 Hz
Acoustic Space
Flat, -2 dB, -4 dB
Protection
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
Power
100-120V ~50/60 Hz or 220-240V ~50/60 Hz
Cabinet
Vinyl-laminated, medium-density fiberboard
Physical
Width
6.42" (163 mm)
Depth
7.09" (180 mm)
Height
9.45" (241 mm)
Weight
13 lb. (5.9 kg)
PRICE PER UNIT
S1X
The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.
The smallest reference speaker
The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.
The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.
Woofer
Number
1
Basket Ø
6" (156 mm)
Voice coil Ø
1.5" (37 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
200 W / 280 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
±10 dB
High Shelf EQ > 6 kHz
±6 dB
Low Shelf EQ
±6 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR
General data
Panel
Rear
Frequency response
40 Hz - 50 kHz
THD > 80 Hz
≤1.5 %
Long term output
≥103 dB
Max. peak
≥113 dB
Crossover frequencies
2200 Hz
Input impedance
10 KOhm
Weight
13.2 lb (6 kg)
Magnetically shielded
Optional
Height x Width x Depth
11.5" (295 mm) x 7" (175 mm) x 10" (260 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
Features of the HR824mk2 Studio Reference Monitor:
- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems
Dimensions and Weight in PackagingShipping Weight: 41 lbs Shipping Dimensions: 14 x 18 x 22 in
M-Audio BX8 D3 Features:
150W active studio monitor with 8" military-grade Kevlar low-frequency driver and 1.25" silk dome tweeter
Bi-amplified design delivers a sound that's both powerful and precise
Custom waveguide ensures accurate dispersion for an incredibly tight soundstage
Optimized rear-mounted port produces defined low-end response with bass extension down to 37Hz
Acoustic Space Control tailors your monitor to your mix space
Volume control for dialing in the perfect playback level
Balanced combo input allows for flexible installation
Front-panel LED shines brightly when the speaker is positioned at an ideal angle
M Audio BX8 D3 8 Inch Powered Studio Monitor Specifications
Frequency Range: 37Hz – 22kHz
Crossover: 2.0kHz
Maximum Peak Input Level: -2dBU
Input Types: Balanced 20kO XLR, and TRS
Unbalanced: 10kO TS
Input Sensitivity: -12dBU
HF Driver Size: 31.8 mm (1.25“)
LF Driver Size: 203 mm (8“)
Amplifier Power: 150W Class A/B
HF Driver Power Amp: 70W
LF Driver Power Amp: 80W
Port: Rear internally flared
Controls: Yes
Magnetic Shielding: Yes
AC Input Voltage: 100–120V, 50/60 Hz 220–240V, 50/60 Hz
Enclosure Construction: MDF
Enclosure Finish: Black PVC
Baffle Construction: Injection-molded ABS
Baffle Finish: Matte black with Soft-touch
Dimensions (HxWxD): 384 mm x 250mm x 302mm (15.1” x 9.8” x 11.9”)
Weight: 10.5 kgs (23.1 lbs)
Display Carton (HxWxD): 398mm x 345mm x 482mm (15.6” x 13.5” x 18.9”)
Shipping Carton (HxWxD): 412mm x 359mm x 502mm (16.2” x 14” x 19.68”)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams 
Active crossover network with 4th order Linkwitz-Riley filters 
Reviews
There are no reviews yet.