PRESONUS Eris E5 XT Active 5.25″ studio monitor (Piece)

• 5.25-inch woven composite low-frequency transducer
• 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
• Front-firing acoustic port for superior bass-frequency reproduction
• Optimized, resonance-suppressing internal bracing
• 102 dB maximum continuous SPL

• HF Adjust (±6 dB, continuously variable)
• Midrange Adjust (±6 dB, continuously variable)
• Acoustic Space settings (flat, -2, -4 dB) for accurate mixing contour
• Highpass filter (Off, 80 Hz, 100 Hz)

• 70 watt, Class AB biamplification
• RF interference, output current limiting, over-temperature, transient, and subsonic protection
• Amplifier "soft start” feature eliminates popping on power-up
• Internal power supply with IEC connector
• Power switch with on/off LED

• Balanced XLR/¼-inch
• Unbalanced RCA inputs

The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.

Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type 
Input Sampling rate
No de-emphasis  29 - 200 kHz
Input Sampling rate
Using de-emphasis 
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches 
Speaker weight 5.6 kg (12.3 lb)

Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB

Benefit: Sound true to actual recording

Benefit: Any pair of speakers is a matched pair

Active Technology

2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W

Benefit: Precise dividing slope, correct phase, and low distortion

Benefit: Minimal chance of speaker damage due to overdriving

Servo Loop Woofer Technology

Electronic control and dampening

Benefit: Speaker output is as true to incoming signal as possible

Frequency Response Controls

80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)

Benefit: Excellent response in a variety of acoustic environments

Wide Sweet Spot

Custom-designed die-cast wave guide

Benefit: User hears the same thing across a wider range of motion

3-Position Acoustic Space Switch

Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement

Benefit: As close-to-flat performance as possible regardless of placement in room

Applications
Professional Recording Studios

Home and Project Studios

Film (THX) and Post Production Studios

Home Theater Installations

Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

PRICE PER UNIT

The smallest big sound ever...

With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction.

A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly.

Stereolink

A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.

This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.

Controls and Connectors

The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.

Review: "Highly recommended“

"Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“
(Jon Chappell, Harmony Central, 03/10)

Review: "...one of the best compact monitors“

"ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10)

    * Active studio monitors with USB audio interface
    * 4.25-inch magnetically shielded, inverted cone, copolymer woofer
    * 1-inch silk dome high frequency driver
    * 2 x 20 watts of internal stereo power
    * Two combination mic and instrument/line inputs
    * Two 1/8-inch stereo headphone outputs with level controls
    * Includes Cakewalk® Sonar LE music production software
    * Mic and instrument/line gain control with clip LED
    * 16-bit 44.1kHz/48kHz
    * Stereo RCA and 1/8-inch aux inputs
    * 2-position switch for no-latency direct stereo and mono monitoring
    * Mix control to balance computer and audio sources
    * USB and speaker cable included