PRESONUS PRM-1 Precision Reference Microphone

93.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: APA2018-18938 Categories:
The PRM1 Precision Reference Microphone is a special type of condenser microphone that provides an accurate reproduction of a room’s sound characteristics for use with audio-analysis tools such as real-time analyzers (RTAs) and spectrographs. ¼-inch, pre-polarized electret-condenser capsule Linear frequency response between 20 Hz and 20 kHz Omnidirectional polar pattern Low noise, low distortion All-metal […]

 

Read more

The PRM1 Precision Reference Microphone is a special type of condenser microphone that provides an accurate reproduction of a room’s sound characteristics for use with audio-analysis tools such as real-time analyzers (RTAs) and spectrographs.
  • ¼-inch, pre-polarized electret-condenser capsule
  • Linear frequency response between 20 Hz and 20 kHz
  • Omnidirectional polar pattern
  • Low noise, low distortion
  • All-metal chassis
  • Comes with a clip, foam windscreen, and hard case
  • High-quality components and rugged construction
  • Suitable for system analysis and measurement
  • Especially recommended for use with PreSonus StudioLive mixers and VSL with Smaart® Measurement Technology
General Specifications
Type Black electret condenser
Element Pressure, FET preamplifier
Polar Pattern Omnidirectional
Connections
Polarity Pin 2 output positive voltage (relative to Pin 3) when diaphragm receives positive pressure (moves inward)
Connector 3-pin XLR Male
Performance
Frequency Response 20 Hz to 20 kHz
Sensitivity (@ 1 kHz open-circuit voltage) -37 dB/Pa (14 mV/Pa) 1 Pa=94 dB SPL
Rated Impedance 200Ω
Minimum Load Impedance 1,000Ω
EIN (A-weighted) 26 dB
Max. SPL (1 kΩ load) 132 dB SPL (THD ≤ 1%, 1 kHz)
Dynamic Range (1 kΩ load) 106 dB
S/N Ratio 70 dB
Power
Phantom Power 9-52V
Current Consumption 2 mA
Physical
Length 7.56″ (192 mm)
Width 0.83″ (21 mm)
Weight 5.3 oz (150g)
Finish Metal, matte black
Environmental Conditions 10-50˚ C, humidity 0-95%
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “PRESONUS PRM-1 Precision Reference Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

PRESONUS PRM-1 Precision Reference Microphone removeRODE NT-6 COMPACT CONDESER MICROPHONE Demo or end of life removeAKG CK 33 - Cardioid Condenser Microphone removeSENNHEISER ME-67 Capsule elecret super shotgun removeAKG C 411PP Vibration Pickup Condenser microphone for string instruments removeSENNHEISER E-865S Condenser Microphone with ON/OFF Switch remove
NamePRESONUS PRM-1 Precision Reference Microphone removeRODE NT-6 COMPACT CONDESER MICROPHONE Demo or end of life removeAKG CK 33 - Cardioid Condenser Microphone removeSENNHEISER ME-67 Capsule elecret super shotgun removeAKG C 411PP Vibration Pickup Condenser microphone for string instruments removeSENNHEISER E-865S Condenser Microphone with ON/OFF Switch remove
ImagePRESONUS PRM-1 Precision Reference Microphone
SKUAPA2018-18938H11RD00016CK 33H10SE00022C 411PPH10SE00072
Rating
Price 93.00 incl. GR VAT 179.00 incl. GR VAT 164.00 incl. GR VAT 265.00 incl. GR VAT 164.00 incl. GR VAT 239.00 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

In stock

In stock

In stock

AvailabilityAvailable on backorderIn stockAvailable on backorderIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe PRM1 Precision Reference Microphone is a special type of condenser microphone that provides an accurate reproduction of a room's sound characteristics for use with audio-analysis tools such as real-time analyzers (RTAs) and spectrographs.
  • ¼-inch, pre-polarized electret-condenser capsule
  • Linear frequency response between 20 Hz and 20 kHz
  • Omnidirectional polar pattern
  • Low noise, low distortion
  • All-metal chassis
  • Comes with a clip, foam windscreen, and hard case
  • High-quality components and rugged construction
  • Suitable for system analysis and measurement
  • Especially recommended for use with PreSonus StudioLive mixers and VSL with Smaart® Measurement Technology
General Specifications
Type Black electret condenser
Element Pressure, FET preamplifier
Polar Pattern Omnidirectional
Connections
Polarity Pin 2 output positive voltage (relative to Pin 3) when diaphragm receives positive pressure (moves inward)
Connector 3-pin XLR Male
Performance
Frequency Response 20 Hz to 20 kHz
Sensitivity (@ 1 kHz open-circuit voltage) -37 dB/Pa (14 mV/Pa) 1 Pa=94 dB SPL
Rated Impedance 200Ω
Minimum Load Impedance 1,000Ω
EIN (A-weighted) 26 dB
Max. SPL (1 kΩ load) 132 dB SPL (THD ≤ 1%, 1 kHz)
Dynamic Range (1 kΩ load) 106 dB
S/N Ratio 70 dB
Power
Phantom Power 9-52V
Current Consumption 2 mA
Physical
Length 7.56" (192 mm)
Width 0.83" (21 mm)
Weight 5.3 oz (150g)
Finish Metal, matte black
Environmental Conditions 10-50˚ C, humidity 0-95%

The R?DE NT6 is specifically designed for difficult mounting applications. Although
clearly relevant to instrument mic'ing, the new NT6 is extremely well suited to any
situation where a small 'unobtrusive' but powerful microphone system is required.
The NT6 utilises the 1/2" (externally biased) gold sputtered true condenser transducer
used in the internationally renowned R?DE NT5. The capsule is designed to attach to
a custom made, multi-position swivel mount allowing it to be independently positioned
with ease.
To further increase the versatility of the NT6, it is supplied with 2 thread adaptors - 1/4"
to 5/8" and 1/4" to 3/8" that enable the capsule assembly to be securely attached to a
wide variety of mic stands, tripods and boom poles.
The capsule is connected to the pre-amplifier (body) by a custom 3 m Kevlar? fibre reinforced
cable. Housed within the heavy duty satin-nickel-plated body, is a state-of-the-art low noise
balanced output preamplifier, exhibiting a wide dynamic range and full frequency response.
The surface-mount pre-amplifier circuit also incorporates a 2-position variable pad: 0 dB an -10 dB
attenuation, and a 2-position variable high-pass filter that enables you to step from a flat response
to 80 Hz high pass filter; both conveniently located away from the capsule, providing additional
control without the need to move the capsule once in position.
The NT6 is intended for Film, Television, Broadcast, Live Performance, Theatre, Television,
Surround and Environmental recording applications or wherever your imagination takes you.
The NT6 is produced in R?DE's design and manufacturing facility in Sydney, Australia. Utilising
state of the art computer controlled machining and assembly technologies, R?DE is able to
achieve levels of finish and repeatability of the most exacting standards and tolerances.
The NT6 comes supplied with Microphone Preamp (Body), Capsule, 3 m Kevlar? fibre reinforced
cable, RM5 Stand Mount, 2-axis Swivel Mount, 2 thread adaptors, ZP1 Zip Pouch and WS5 Wind Shield.
 
FEATURES:
? 1/2? (externally biased) gold sputtered true condenser capsule ? Heavy duty satin-nickel-plated body
? 2-position variable pad: 0 dB and -10 dB ? 2-position variable high-pass filter: flat and 80 Hz ? Surface
mount technology ? Low noise ? Wide dynamic range ? Full frequency response ? Supplied complete
with 2-axis swivel mount, 2 thread adaptors, M5 clip, WS5 (Black) Wind Shield and Soft Pouch ? Designed
& manufactured in Australia ? Full 2 year guarantee 
 
Operation power:
The NT6 is designed to operate from phantom power to the P48 standard. The NT6 will operate
between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output XLR connector. 
Operation output impedance:
Output Impedance: The NT6 will operate satisfactorily into a load impedance as low as 1 kΩ. If a
load below this is used, the output signal level will be reduced. The NT6 output is balanced between
pin 2 (hot) and pin 3 (cold). Pin 1 is ground.
 Acoustic principle:
Externally polarised 1/2" (13mm) pressure gradient condenser
Directional pattern:  Cardioid
Frequency range:
40 Hz ~ 20,000 Hz selectable HPF @ 80 Hz/12 dB/octave
Output impedance: 200 Ω
Signal noise ratio din iec 651:
75 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 19 dB SPL (per IEC651, IEC268-15)
Maximum spl:
138 dB (@ 1% THD into 1 kΩ)148 dB (@ 1% THD into 1 kΩ) - pad at maximum
Sensitivity:
-38 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB
Dynamic range din iec 651: 119 dB (per IEC651, IEC268-15)
Power supply voltage: 48 Volts (P48)
Weight: 386 grm.
Maximum output voltage: 6 dBu (@ 1% THD into 1 kΩ)
Pin assignment:
3 pin XLR, balanced output between pin 2(+), pin (-) & pin 1 (ground)
 

Technical specifications

Polar pattern

hypercardioid

Frequency range

50 to 20,000 Hz

Sensitivity

20 mV/Pa (?34 dBV)

Max. SPL

125 dB (k=1 %)

Equivalent noise level

21 dB-A

Signal/noise ratio (A-weighted)

73 dB

Impedance

600 ohms

Recommended load impedance

>2000 ohms

Supply voltage

9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules)

Current consumption

Connector

Discreet Acoustics Modular standard

Finish

matte dark gray

Dimensions

13.5 x 20 mm dia. (0.5 dia. x 0.8 in.)

Net weight

5 g (0.17 oz.)

Shipping weight

88 g (3.1 oz.)

Accessories (included)

W 30

The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish.

Pick-up pattern : lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm (K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 343 mm
Weight : 100 g

  Weighing only 18 grams (0.6 oz.), this ultra-light condenser pickup is ideal for acoustic guitar, mandolin, violin, and most other stringed instruments. The C 411 will give a clear and uncolored sound without changing the balance of the instrument. Attaching the C 411 on or near the bridge or anywhere else on the instrument is easy with the included non-marring, reusable, solventfree adhesive compound. C 411 PP: For hardwire applications, with standard XLR connector for phantom powering.

The e 865 is a fully professional super-cardioid vocal microphone utilising the very best in condenser microphone technology to achieve new standards of quality and sound. The microphone capsule insorporates special blast/pop protiction plate to shield the diaphragm from excessive sound pressure levels. ON/OFF Switch.

  • Pick-up pattern : super cardioid
  • Sensitivity in free field, no load : (1kHz) 3 mV/Pa
  • Max. Sound pressure level (aktiv) : 150 dB
  • Nominal impedance : 200 Ohm
  • Min. terminating impedance : 1000 Ohm
  • Dimensions : d 47 x 193 mm
  • Weight : w/o cable 311 g
  • Frequency response (microphone) : 40.....20000 Hz
  • Phantom powering : 12 - 48 V
Weight1.00 kg2.00 kg0.30 kg0.10 kg0.15 kg0.31 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 2.00 kg
Weight 0.30 kg
Weight 0.10 kg
Weight 0.15 kg
Weight 0.31 kg