PRESONUS HP-2 Personal Headphone Amplifier

111.59 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The HP2 from Presonus is a battery-powered personal headphone amplifier with volume and pan control for driving wired in-ear monitors as well as headphones. It can be used by musicians and performers in applications such as live stage, theater, rehearsals, and more. The HP2 features two XLR line-level inputs and one stereo 1/8″ headphone output […]

 

Read more

The HP2 from Presonus is a battery-powered personal headphone amplifier with volume and pan control for driving wired in-ear monitors as well as headphones. It can be used by musicians and performers in applications such as live stage, theater, rehearsals, and more.

The HP2 features two XLR line-level inputs and one stereo 1/8″ headphone output and can be switched from stereo to mono operation. It is built tough to take the rigors of life on the road and will mount on a microphone stand or clip to your belt.

In addition, the HP2 has an LED battery indicator and can be powered with an external DC power supply or a 9V battery, which can last more than seven hours. The 6.6\’ 5-pin mini XLR to two female XLR Y-cables is included along with a 5/8″ microphone stand-mount-socket and a belt-clip.

  • Battery-powered, stereo headphone amplifier
  • Inputs: 2 female XLR connectors (via included Y cable)
  • Output: stereo, 1/8″ phone connector
  • Power: 9-volt battery or DC power supply
  • Volume control knob; Pan control knob
  • Stereo/mono operation switch
  • Battery-health LED indicators
  • Belt clip included
  • 5/8″ microphone stand-mount socket

Inputs

Connector Type 2x XLR female
Max Input Level: +4 dBV
Weight 0.45 kg

Reviews

There are no reviews yet.

Be the first to review “PRESONUS HP-2 Personal Headphone Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

PRESONUS HP-2 Personal Headphone Amplifier removeART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER removePalmer Pro MONICON W - Passive Monitor Controller white Limited Edition removePALMER PMONICON Pro MONICON - Passive Monitor Controller removeLD Systems HPA 6 - 19" Headphone Amplifier 6-channel removeART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP remove
NamePRESONUS HP-2 Personal Headphone Amplifier removeART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER removePalmer Pro MONICON W - Passive Monitor Controller white Limited Edition removePALMER PMONICON Pro MONICON - Passive Monitor Controller removeLD Systems HPA 6 - 19" Headphone Amplifier 6-channel removeART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP remove
Image
SKUHP-2AT/EM/000035PMONICONWPMONICONLDHPA6AT/EM/000036
Rating
Price 111.59 incl. GR VAT 108.00 incl. GR VAT 75.00 incl. GR VAT 70.00 incl. GR VAT 212.03 incl. GR VAT 97.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 2 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Only 2 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The HP2 from Presonus is a battery-powered personal headphone amplifier with volume and pan control for driving wired in-ear monitors as well as headphones. It can be used by musicians and performers in applications such as live stage, theater, rehearsals, and more. The HP2 features two XLR line-level inputs and one stereo 1/8" headphone output and can be switched from stereo to mono operation. It is built tough to take the rigors of life on the road and will mount on a microphone stand or clip to your belt. In addition, the HP2 has an LED battery indicator and can be powered with an external DC power supply or a 9V battery, which can last more than seven hours. The 6.6\' 5-pin mini XLR to two female XLR Y-cables is included along with a 5/8" microphone stand-mount-socket and a belt-clip.

  • Battery-powered, stereo headphone amplifier
  • Inputs: 2 female XLR connectors (via included Y cable)
  • Output: stereo, 1/8" phone connector
  • Power: 9-volt battery or DC power supply
  • Volume control knob; Pan control knob
  • Stereo/mono operation switch
  • Battery-health LED indicators
  • Belt clip included
  • 5/8" microphone stand-mount socket
Inputs
Connector Type 2x XLR female
Max Input Level: +4 dBV

MyMONITOR - Personal Headphone Monitor Mixer Overview

Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.

MyMONITOR - Personal Headphone Monitor Mixer Specifications:

Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)

Palmer Monicon, and the volume is right! With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal. The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
  • Type: passive
  • Number of channels: 2
  • Number of inputs: 2
  • Input connections: XLR Combo / 3.5mm stereo jack
  • Input type: balanced/unbalanced
  • Maximum input level: +20 dBu
  • Input impedance: 10 kohms balanced/ 5 kohms unbalanced
  • Number of outputs: 2
  • Output connections: XLR/m, 3.5 mm stereo jack
  • Output type: balanced/unbalanced
  • Max output level: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10Hz - 40 kHz +/- 1 dB
  • THD: 0,001 %
  • Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
  • Controls: Attenuation, Mute, Mono
  • Housing material: sheet steel/wood
  • Housing surface: powder-coated
  • Width: 164 mm
  • Height: 62 mm
  • Depth: 85 mm
Palmer Monicon, and the volume is right! With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal. The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
  • Type: passive
  • Number of channels: 2
  • Number of inputs: 2
  • Input connections: XLR Combo / 3.5mm stereo jack
  • Input type: balanced/unbalanced
  • Maximum input level: +20 dBu
  • Input impedance: 10 kohms balanced/ 5 kohms unbalanced
  • Number of outputs: 2
  • Output connections: XLR/m, 3.5 mm stereo jack
  • Output type: balanced/unbalanced
  • Max output level: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10Hz - 40 kHz +/- 1 dB
  • THD: 0,001 %
  • Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
  • Controls: Attenuation, Mute, Mono
  • Housing material: sheet steel/wood
  • Housing surface: powder-coated
  • Width: 164 mm
  • Height: 62 mm
  • Depth: 85 mm
 
LDHPA6 6-Channel Rackmount Headphone Amplifier The LD Systems HPA 6 is a highly flexible 1U 19" rack format headphone amplifier with 6 fully independent channels and comprehensive features for a wide range of professional audio monitoring applications. Each channel provides a 6.3 mm TRS headphone output on the front panel with level control, mono/stereo switching, discrete left/right muting  and a 6.3 mm TRS Aux input with Main/Aux balance control  for mixing in further signal sources. Four-segment LED meters permit visual output level monitoring, and two 6.3 mm TRS outputs per channel on the rear allow for connecting a total of 18 headphones. The HPA 6\'s main section features a master level control with eight-segment LED metering  and 6.3 mm TRS input to mix in an additional source with all channels. The rear panel provides the main stereo inputs on balanced XLR and 6.3 mm TRS connectors and stereo outputs for daisy chaining multiple units.
  • Type: 6-channel
  • Inputs: Main Input (Stereo), Direct In (Stereo), 6 x Aux In (Stereo)
  • Input Connections: XLR and 6.3 mm jack L&R (Main Input, balanced), 6.3 mm stereo jack (Direct In), 6.3 mm stereo jack (Aux In)
  • Input Impedance: 13 kOhm
  • Line Outputs: Main Output (stereo, balanced)
  • Line Output Connectors: XLR and 6.3 mm jack L&R
  • Headphone Outputs: 6 x 3
  • Headphone Output Connectors: 6.3 mm stereo jack
  • Power Output: 6 x 125 mW
  • Minimal Connected Impedance per Channel: 8 ohms
  • Frequency Response: 20 Hz - 20.000 Hz
  • Controls: Main Input Level, 6 x Input Mix Main/Aux, 6 x Headphone Level, 6 x Mono Switch, 6 x Mute L&R, Power
  • Indicators: Main Input/Direct In Level Meter (8-segment LED chain), 6 x channel level meter (4-segment LED chain), 6 x mono LED, 6 x Mute L&R LEDs, Power LED
  • Power Supply: IEC power socket
  • Operating Voltage: 220 - 240 V AC, 50 - 60 Hz / 110 - 120 V AC, 50 - 60 Hz
  • Power Consumption: 40 W
  • Cabinet Material: metal
  • Cabinet Surface: painted
  • Width: 483 mm
  • Height: 44 mm
  • Depth: 217 mm
  • Accessories (included): power cord

HeadAMP - Four Output Stereo Headphone Amp Overview

Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).

HeadAMP - Four Output Stereo Headphone Amp Specifications:

Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included) 
Total Harmonic Distortion

Weight0.45 kg0.59 kg0.75 kg1.00 kg3.00 kg0.59 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.45 kg
Weight 0.59 kg
Weight 0.75 kg
Weight 1.00 kg
Weight 3.00 kg
Weight 0.59 kg