| Content |
The PreSonus® Studio 192 Mobile USB 3.0 audio interface delivers exceptional sonic fidelity, flexible connectivity, and professional monitoring and mixing controls in a compact desktop design. Whether you’re a producer, an audio engineer, an independent band, a sound designer, or all of the above, your Studio 192 Mobile was built for you to create.
The Studio 192 Mobile provides an integrated, portable, hardware and software solution for recording in personal and professional studios wherever they may be. Switch between any two mixes using the Cue function and the onboard headphone amp. Software-controlled Dim and Mono options let you take control of your main mix. Use the six balanced outputs for monitor mixing or speaker switching, or both, depending on how you work. With its flexible software and abundant I/O, the Studio 192 Mobile fits into any recording and production environment.
Connect a Studio 192 Mobile and you’ll instantly hear details and an open high end you expect from a professional studio front end. The Studio 192 Mobile operates at up to 192 kHz for ultra-high-definition mixing and recording. High-quality Burr-Brown converters on every input and output provide 118 dB of dynamic range to capture complex musical harmonics smoothly and naturally with no audible distortion. And our recallable XMAX microphone preamps deliver incredibly high headroom, deep lows, smooth highs, and a rich overall sound so you’ll hear every breath, transient, and detail in your recordings.
At PreSonus, we know that the microphone preamplifier is a key component in the sonic quality of a recording. The Studio 192 Mobile includes two custom-design, high-voltage, Class A XMAX preamps with discrete components for accuracy and transparency.
XMAX preamplifiers are built with three key elements:
Class A. Class A circuits have no crossover distortion and deliver purer, clearer, and more musical results than the Class AB designs that are found in many preamps.
High Voltage. The XMAX preamplifier runs on power rails of 30V. Most off-the-shelf, op-amp-based designs run on power rails of 10V to 18V. Higher-voltage power rails deliver more headroom, deeper lows, smoother highs, and a richer overall sound.
Discrete components—not op-amps. We only use genuine transistors, resistors, and capacitors. Op-amps add noise, coloration, and harshness to a signal. Our discrete design delivers ultra-low noise and transparency.
The net result of the XMAX preamp design is high headroom, low noise, wide dynamic range, extended frequency response, and—most important—musicality and transparency.
The Studio 192 Mobile’s XMAX preamps offer another advantage: They are recallable. In 1995, PreSonus patented digital control over analog circuits with our first studio product. Building on this legacy, we created a separate digital volume-control circuit ahead of our analog XMAX preamp design, providing the convenience of digital recall without sacrificing fidelity. The preamps can be controlled from the unit’s front panel, from UC Surface control software, from Studio One’s mixer, from Studio One Remote, and via MIDI in Pro Tools, Logic, or Live so you can save the settings with your recordings.
With the Studio 192 Mobile, your audio interface is an integrated extension of your recording environment. Launch Studio One® 3, and you’ll find full preamp control and monitor-mix functions integrated into your recording environment. Our hybrid Fat Channel plug-in runs on the Studio 192’s DSP and in Studio One on your computer so you can record and monitor with Studio 192-based processing and seamlessly switch to the Studio One Fat Channel for playback. Need to track away from your computer? Launch Studio One Remote on your iPad®.
The Studio 192 Mobile’s onboard features can also be controlled in PreSonus’ free UC Surface control software, so even if you use third-party recording software, you can remotely access them. UC Surface has rapidly won accolades for an intuitive mixing interface that provides quick access to everything you need to create quality monitor mixes.
Managing both a monitor-mixing application and your DAW can be challenging if you don’t have multiple screens. Because UC Surface can be run wirelessly on a Windows touchscreen computer or iPad, you don’t have to share screen real estate with your DAW. This also allows your musicians to dial in their monitor mixes remotely without adding an expensive personal monitor system.
In addition to creating high-quality monitor mixes, UC Surface can also be used to turn your Studio 192 Mobile into a speaker-management system by providing speaker switching plus main-mix mono and dim functions. Listening to your mix on multiple pairs of reference monitors can reveal new insights. Enabling speaker-switching mode in UC Surface allows you to listen to your main mix through three different output pairs on your Studio 192 Mobile and switch between them.
Adding just the right amount of effects and processing to a monitor mix can make a huge difference in a musician’s ability to experience their performance naturally. To that end, the Studio 192 Mobile includes Studio One Fat Channel plug-in processing on every analog input and the first ADAT inputs, plus a stereo reverb and delay. The result is a better performance and a better recording.
The Fat Channel suite of studio-grade signal processors evolved from our classic ACP88 compressor/gate and was first incorporated into our StudioLive mixers. The musical, natural sound of the combined signal path quickly made StudioLive mixers famous for their ability to help create great-sounding mixes.
The Fat Channel includes a highpass filter, noise gate with key listen, compressor, 4-band parametric equalizer, and limiter. Fifty factory presets, created by professionals, are included to help you quickly create the sound you want. Fat Channel presets can be created in UC Surface or in Studio One and can be shared between the two. You can also share settings with other Studio One, StudioLive, and Studio 192 users.
The Studio 192 Mobile has 18 digital inputs and outputs, allowing you to add more analog I/O when you need it. The DigiMax DP88 preamp/converter was designed to seamlessly extend the analog I/O on the Studio 192 Mobile with eight digitally-controlled XMAX preamps, ADAT I/O support up to 96 kHz, direct analog inputs, DAC outputs, and word clock I/O. Its mic preamps are fully remote-controllable from UC Surface, Studio One, and Studio One Remote when connected via ADAT Lightpipe to the Studio 192 Mobile so that they naturally extend your analog inputs both sonically and functionally.
The Studio 192 Mobile gives you a powerful combination audio interface and studio command center. With pristine audio up to 192 kHz, Fat Channel DSP effects, remote-controllable preamps, monitor mixing, speaker switching, a headphone amp, and unprecedented Studio One integration, it gives you a portable recording solution like no other.
Χαρακτηριστικά:
- Compatible with most recording software for Mac and Windows
- Simultaneous I/O up to 22 inputs/26 outputs (8x14 at 192 kHz)
- Individual stereo main balanced outputs with mono, dim, mute, output metering and level control accessible from front-panel and UC Surface
- 2 front-panel combo microphone/instrument inputs
- 2 XMAX remote-controllable mic preamps with individually switched 48V phantom power
- 2 balanced, line level, direct-to-ADC inputs, available via dual-purpose rear-panel combo jacks
- 4 balanced ¼” TRS outputs for monitor mixing and speaker switching
- ADAT Optical/Dual SMUX inputs/outputs: 16x16 channels at 44.1 or 48 kHz; 8x8 channels at 88.2 or 96 kHz
- Stereo S/PDIF coaxial input and output
- 1 high-volume headphone output with dedicated DAC
- BNC word clock input and output with low-jitter clocking
- USB 3.0 audio interface
- USB 2.0 compatible
- 24-bit resolution and up to 192 kHz sampling rate
- Top-quality 118 dB A/D/A converters
- Road-rugged construction with all-metal chassis and metal knobs
- 1U rack-mountable
- 18 VDC external power supply (included)
| U-CONTROL UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output and Massive Software Bundle
Behringer U-Control UCA202
- 2 In/2 Out USB Audio Interface
- Mac or PC, no drivers required
- 16-bit/48kHz converters
- Low latency
- Headphone output
- S/PDIF optical out
- USB powered
- Free Software
- Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
- Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
- Massive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
- Works with your PC or Mac computer—no setup or drivers required
- High-resolution 48 kHz converters for high-end audio quality
- Stereo Headphone output with dedicated Level control lets you monitor both input and output
- Additional S/PDIF optical output for direct digital conversion
- Powered via USB—no external power supply needed
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The Smallest, Most Portable 2x2 USB Interface Around!Are you looking for a simple upgrade to your computer's stock audio hardware? Do you want to record high-quality stereo audio to your laptop? Are you searching for the most affordable audio interface for computer DJ applications? The Behringer UCA222 USB Audio Interface does all this and more in one of the smallest, simplest, and lowest-priced packages around. It's a quick, simple, reliable solution for a wide range of audio applications.
High-Quality, Industry Standard ConnectionsLook at your computer's audio output. What is it? A 1/8-inch mini stereo jack, most likely. That's fine for plugging in headphones, but a terrible way to connect to external sound systems, stereos, PAs, mixing boards, or any other audio hardware. The UCA222 easily connects to your outboard pro audio gear, and you even get an optical S/PDIF digital output for connecting to high-end digital equipment. Now, take a look at your computer's input. If it has one at all, it's most likely the same deal -- 1/8-inch mini-jack. Again, the Behringer UCA222 provides universally recognized RCA inputs for bringing a wide variety of audio sources and equipment into your computer for pristine recording. You also get a dedicated headphone output for direct monitoring of both the ins and the outs on the UCA222.
Greatly Improved AudioYou computer's built-in audio system has a number of limitations, especially if your computer is a laptop. Machine noise and other electrical interference can disrupt, distort, or otherwise ruin recording and critical listening and playback situations. The Behringer UCA222 solves this problem by placing your sound card at the end of a USB cable run far from your machine's noisy electrical components. It seems like a such a simple solution, but this arrangement greatly reduces interference and provides a wonderfully low noise-floor for recording and professional playback. The UCA202 provides analog-to-digital audio conversion at 48 kHz or 44.1 kHz sampling rates and 16-bit resolution.
Super Simple Setup
As a USB device, the UCA222 is the textbook example of a Plug-N-Play device. Compatible with both Windows and Mac systems, the UCA222 requires no additional software drivers to work. Relying on your operating system's sound architecture, the UCA222 is instantly compatible with just about every audio software on the market, from multitrack DAWs like Logic and Cubase to audio editing programs like BIAS to DJ software like Itch. Spend time making music, not troubleshooting your hardware.
The applications for the Behringer UCA222 USB Audio Interface are practically limitless. Whether you're an electronic music producer, latptop DJ, mix engineer, audio archivist, or just a lover of music, the Behringer UCA222 is just about the easiest way to add a professional audio interface to your computer. |
The FA-66 is a 6-channel portable FireWire audio interface designed with the mobile recording and performance professional in mind. The FA-66 offers incredible audio fidelity, stability, and a practical set of input and output options. It also offers two XLR/TRS combo inputs with phantom power, plus two RCA inputs, four balanced +4dBu outputs, optical S/PDIF I/O, a built-in analog limiter, zero-latency direct monitoring, solid metal construction, and FireWire bus power, all in a durable compact case.
* 6-in/6-out 24-bit/96kHz simultaneous performance
* 4-in/4-out 24-bit/192kHz simultaneous performance
* 2 XLR/TRS combo jacks w/premium phantom-powered mic preamps
* +4 dB balanced input and output
* S/PDIF optical input & output ports with Sync LED indicator
* MIDI in/out ports
* Built-in analog limiter and indicator
* FireWire bus powered
* AC adaptor included
* Mac OS X CoreAudio and Windows XP WDM and ASIO 2.0 support
* Zero-latency Direct Monitoring
* 6-pin and 4-pin IEEE1394 ports
* Compact, solid-metal construction |
Equipped with the latest generation 24-bit, enhanced multi-bit 128x oversampling 192-kHz converters, the HD192 achieves a remarkable A-weighted signal-to-noise ratio of 120 dB with balanced XLR connectors throughout. Ideal for surround applications, the HD192's 12 inputs and 12 outputs can support two simultaneous 5.1 mixes. And the HD192 is full of advanced features, like AES/EBU I/O with sample rate conversion both in and out.
The PCI-424 card introduced with the 2408mk3 is 192-kHz ready. Just connect the HD192 expansion interface to record 192-kHz audio.
The HD192 can be purchased as an expander for an existing PCI-424-based MOTU Audio System, or as a core system which includes the PCI-424 card and Audiodesk workstation software.
|
The UA-1G is a compact 1 x 1 USB Audio Interface that offers excellent-quality sound via multiple connection options and a simple, user-friendly design.
- Stereo input and output at 24-bit/96kHz audio quality
- High-end A/D and D/A converters for accurate recording and playback
- Large Input Level knob for easy control while recording
- 1/4" jack with Hi-Z option for recording electric guitar or bass
- Electret condenser mic input
- RCA phono type and optical-digital audio I/O
- Headphone output
- USB powered – no AC adapter required
- SONAR LE for music recording, editing, and publishing on PC
- Low-latency ASIO 2.0 (PC); WDM (Windows Vista, Windows XP) and Core Audio (Mac OS X) support
| Number of Audio Record/Playback Channels | Record: 1 pair of stereo
Play: 1 pair of stereo
REC SOURCE switch = ANALOG: Full duplex (except for 96 kHz setting)
REC SOURCE switch = DIGITAL: Recording only |
|---|
| Signal Processing | PC interface: 24 bits
AD/DA Conversion: 24 bits (linear)
* ADVANCE DRIVER switch = OFF: 16 bits |
|---|
| Sampling Frequency | Digital output: 32/44.1/48/96 kHz
Digital input: 32/44.1/48/96 kHz
AD/DA Conversion: 32/44.1/48/96 kHz
* ADVANCE DRIVER switch = OFF: 32/44.1/48 kHz
|
|---|
| Nominal Input Level | Line input jacks: -10 to +4 dBu
Guiter input jakcs: -30 to -16dBu
Mic input jack: -40 to -26 dBu
|
|---|
| Nominal Output Level | Line output jacks: -10 dBu |
|---|
| Interface | USB Digital input (Optical mini type)
* The same jack serves as both the Mic Input jack and digital input connector.
Digital output (Optical mini type)
* The same jack serves as both the headphones jack and digital output connector.
* conforms to IEC60958 consumer format. |
|---|
| Controllers | ADVANCED DRIVER Switch
Guiter/Mic Switch
INPUT VOLUME knob
PHONES VOLUME Dial
SAMPLE RATE Switch
96kHz MODE Switch
INPUT MONITOR Switch
REC SOURCE Switch |
|---|
| Connectors | USB Connector (B type)
Line Input jacks (L, R) (RCA phono type)
Line Output jacks (L, R) (RCA phono type)
Guiter/Mic Input jack: （1/4 inch phone type)
Mic Input jack (Plug-in powered miniature phone type)
Digital Intput connector (Optical mini type)
* The same jack serves as both the headphones jack and digital output connector.
Headphones jack (Stereo miniature phone type)
Digital Output connector (Optical mini type)
* The same jack serves as both the Mic Input jack and digital input connector. |
|---|
| Power Supply | Supplied from the computer |
|---|
| Current Draw | 200 mA |
|---|
| Accessories | Ownerʼs Manual, UA-1G CD-ROM, SONAR LE CD-ROM |
|---|
| Size and Weight |
|---|
| Width | |
|---|
| Depth | |
|---|
| Height | |
|---|
| Weight | |
|---|
|
UA-20: Audio Capture USB Audio/MIDI Interface
Features
The UA-20 is the standard model to Edirol's rapidly expanding UA series of USB Audio Capture devices. The unit can accept input from Mic, Line and even guitar level signals. The audio is converted at 24-bit quality and is transferred to your computer via industry standard low latency WDM, ASIO, MME drivers for compatibility with all major sequencing platforms, the input signal may be also monitored directly in hardware. Outputs include analogue, digital and headphone. The built-in MIDI in and out utilize Edirol's Fast Processing Technology for super accurate MIDI timing with any sequencing software on Mac or PC platforms and can be used with both OMS or FreeMIDI drivers on the Apple Macintosh. The UA-20 requires no external power supply and is ideal for use by mobile laptop or Powerbook users. The unit ships with drivers for Windows XP, 2000, Me, 98, MacOS X, and Mac OS 9.x, 8.5 and may also be used with the native USB audio drivers that are included with both Mac & PC.
- Audio and MIDI in a compact unit.
- Fully equipped with I/O jacks.
- Great tool for creating music.
- Edirol's FPT Technology.
Record1 pair of stereoPlayback1 pair of stereoSignal ProcessingPC interface24 bitSampling RateDigital output44.1 kHzNominal Input Level-45 – -10 dBuInput ImpedanceLINE22 k ohmsGUITAR470 k ohmsMIC22 k ohmsNominal Output Level-10 dBuOutput Impedance1 k ohmsResidual Noise LevelMaster Out-105 dBu or less
(input terminated with 1 k ohm, Master Volume = max.,
Input Monitor = off, IHF-A, typ.)InterfaceUSB
Digital output (Optical Type , conforms to S/P DIF)ConnectorsInput Jack (1/4 inch phone type) x 2
Digital Out Connector (Optical type)
Headphones Jack (Stereo miniature phone type)
Master Out Jack (RCA phono type)
MIDI ConnectorsOthersPower SupplySupplied from the computerCurrent Draw170 mAAccessoriesOwnerʼs Manual
USB cable
CD-ROMSize and WeightWidth149 mm5-7/8 inchesDepth111 mm4-3/8 inchesHeight43 mm1-11/16 inchesWeight0.2 kg0 lbs. 8 oz.
|
Reviews
There are no reviews yet.