| Content |
BM103T Microphone call station designed for use with gooseneck microphones, equipped with connectors and XLR-3P socket. It requires phantom power and can be combined with any PROEL integrated amplifiers and mixers. Scratch-proof plastic housing, microphone on/off button.
Specifications
Controls :ON/OFF SWITCH
Output Connectors :INPUT: 1x XLR OUTPUT: 1x XLR
Dimensions (W x H x D) :120 x 130 x 50 mm
Weight:0.7 kg (1.5435 lb)
| |
- Choice of microphones for every kind of system and room acoustics.
- Display and multifunction soft keys for ease of use.
- Up to 63 language channels independently selectable for two users.
- 1, 3, 5-way voting/polling function.
- Dip-switch selectable president and delegate operating modes.
The CS 5 VU provides two operating modes, reducing the number of different components needed for a conference system.
In a small discussion system with CS 5 DU microphone stations, the chairperson would typically use a CS 5 VU. In President mode, it provides a priority function and allows the user to start votes or polls. The display will then indicate the time left for voting and the results.
In a larger conference system, the CS 5 VU can be used both by delegates and by the president. In delegate mode, it provides all voting and language selection functions independently for two delegates. A bank of dip switches allows the CS 5 VU to be set to President mode with priority and 1, 3, or 5-way voting/polling functions. In computer-controlled conference systems, chip-card identification is available as an option.
Gooseneck, capsule and connecting cable are not included.
The unit shall act as chairman unit or normal delegate unit, selectable by a dipswitch on the bottom of the housing. It shall have a built-in microphone and loudspeaker, which allow the forwarding of the voice of the speaker towards the other units of the system. The chairman shall always be able to start 1,3 and 5 step voting from the unit and monitor the results on the unitʼs display. Priority calls shall also be possible from his unit.
The CS 5 VU is suitable for taking over maximum 63 interpreted languages and the room voice as well, which may be listened to through the headset that is connected to the device. A chip card reader is also included in the unit, with the aid of which it is possible to identify the user of the device in the case of a computer controlled conference.
The backlit graphic LC display facilitates using the device and displays its current status and the result of the vote. The unit shall operate for 2 persons simultaneously, with independent adjustable languages for each of the 2 x 3,5mm stereo jack headphone sockets.
|
Flush mounting frame for permanent installation of the AKG conference microphone units |
- System Features and Outline
- Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for monitoring.
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATION:
| Power Source | 7.4 V DC (battery), 9 V DC (AC adapter)
(supplied from BP-900 battery (option) or AD-0910 AC adapter (option)) | | Current Consumption | MAX. 270 mA | | Wavelength | 870 nm (AM: Brightness modulation) | | Modulation Method | Frequency modulation | | Carrier Frequency | Transmission: Audio channel 1: 7.35 MHz
Audio channel 2: 8.10 MHz
Audio channel 3: 8.55 MHz
Audio channel 4: 9.15 MHz
Control channel: 6.45 MHz
Reception: Base language channel: 1.95 MHz
Translation language channel: 2.25 MHz | | Acceptance Angle | Vertical: 90°, Horizontal: 120° | | Emission Angle | Vertical: 90°, Horizontal: 120° | | Covering Range | 7 m (radius) | | Input | Microphone terminal: Combined type of XLR-4-31 (dedicated for connecting the optional TS-903 or TS-904) | | Output | Monitor speaker: 8Ω, 0.2 W
Headphone: Mini jack × 2 | | LED Indicator | Speech indicator (flashes when the unit is out of communications range),Voting status indicators 1 -3 (flashes when the unit is out of communication range or when the battery level is low), Power indicator (flashes when the unit is out of communications range or when the battery level is low) | | Battery Life | Approx. 10 hours (when the fully-charged BP-900 battery is used with "During Speech" to "Standby" ratio of 1:2) | | Operating Temperature | 0º to＋40º | | Finish | Top panel: ABS resin, gray metallic, paint, semi-gloss | | Dimensions | 210（W ）×65.9（H ）×152（D ）mm | | Weight | 640g | | Option | Lithium-ion battery: BP-900 AC adapter: AD-0910 |
|
Infrared radiators providing wireless transmission of up to seven language channels for persons (e.g., observers) listing to a conference without asking for the floor.
The infrared radiators shall connected to the CS 5 BU through 2 BNC connectors and 50 Ohm coaxial cabling and serial concatenation. It shall transmit a PPM system modulated time-multiplex outputs of the central unit shall drive an arbitrary number of radiators. The CS 5 IRT1 shall have a radiation angle of +/- 22° and a working distance of 300 meters (with 50% down). The CS 5 IRT2 shall have a radiation angle of +/- 22° and a working distance of 500 meters (with 50% down).
As accessories of the infrared radiators the holding frame needed for mounting it to the side wall or the ceiling shall be included. The transmitter shall have a built in switchable power supply with IEC connector.
|
Reviews
There are no reviews yet.