2-way loudspeaker system 1” high-definition compression driver Wide-coverage 90° x 60° constant directivity horn 8” long-excursion woofer with 1.5” voice coil 600 W peak Class D power amplifier with SMPS High/definition CORE LT DSP with Dynamic EQ 5 DSP presets (MUSIC, LIVE, DJ, MONITOR, SPEECH) MIC and LINE inputs with independent level control SPL MAX: […]
LD Systems STINGER 8 A G3
Active 8" 2-way bass-reflex PA speaker
2-way active 8” bass reflex PA speaker
High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL
Multi-purpose design for fullrange, satellite and monitor applications
Application presets for quick frequency response contouring
BEM optimized HF waveguide for uniform coverage
8” custom woofer and BMS compression driver
DynX® DSP technology for distortion-free performance
2 line/mic input channels with individual gain controls plus mono mix out
12 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
Shock-resistant front grill provides maximum speaker protection
36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
Large selection of smart installation and transport accessories
STINGER 8 A G3
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 8 A G3 is powered by high efficiency Class D amplification with a hefty 300 watts RMS output. It drives a custom designed 8” woofer and BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 8 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 8 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
8 "
Woofer Size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
RMS
300 W
Peak power
600 W
Frequency response
70 - 20000 Hz
Max. SPL (peak)
125 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity
-9 dBu
Controls
2 x gain , 2 x Mic/Line , mode
Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , Switching Power Supply
Operating Temperature
0 - 40 °C
Relative Humidity:
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
270 mm
Height
457 mm
Depth
290 mm
Weight
10,8 kg
Dedicated PA speaker system for fixed installations 2-way bass-reflex system for powerful bass 20 cm woofer (8“) and 2.5 cm dome tweeter (1“) White or titanium plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installation Movable mounting bracket for ceiling or wall installation Ideal for PA applications in restaurants, bars, discos, shops, conferences, etc.
Features
- Powered 2-way, full-range system
- 8″ bass loudspeaker
- Compression driver with titanium diaphragm
- Multiple mounting options
- Stand mountable
The DR-508A is powered full-range system that uses a new 8” low frequency transducer. The M-34 compression driver handles high frequency reproduction.
The 1000 W peak power Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the DR-508A one of the smallest and most powerful portable cabinets on the market.
Technical Data
Nominal Amplifier Power
1000 W peak, 500 W continuous
Class D, Biamplified
Frequency Range (-10 dB)
60 Hz-20 kHz
Rated Peak SPL at 1 m
122 dB
Dispersion
90º x 45º
Enclosure Material
Polypropylene
Color/Finish
Black
Connectors
IN: Female XLR
LOOP THRU: Male XLR
AC IN: powerCON
AC Requirements
115 V, 50/60 Hz
230 V, 50/60 Hz
Current Draw (1/3 power @ 230 V)
1.2 A
Dimensions (H x W x D)
45 x 30 x 30 cm
18 x 12 x 12 in
Weight
11.4 kg (25.1 lb)
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
200mm (8’’) custom woofer with improved efficiency and linearity
200Wrms class D amplifier for LF and 50Wrms for HF.
Low noise toroidal transformer power supply
On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
2 DSP preset for maximum acoustical flexibility
Available in white colour 8AW
Code:
37689 / 37906 White
Configuration:
2 way
Built-in amplifier LF/HF:
200/50 W RMS
Built-in amplifier peak LF/HF:
400/100 W
Frequency response:
60Hz - 20KHz -6dB
Low Frequency woofer:
8 - 1.7 coil inch
High Frequency driver:
1 -1 coil inch
Maximum SPL cont/peak:
120/124 dB
Dispersion:
90° x 60° HxV
Input impedance:
22 Kohm
Crossover Frequency:
2.5 KHz
AC Power requirements:
160 VA
Input connector:
XLR - jack with loop
Power cord:
5 / 16.4 m/ft
Net Dimension (WxHxD):
255x415x245 - 10.03x16.33x9.64 mm/inch
Net Weight:
8.2 / 18.7 Kg/lb
Transport Dimension (WxHxD):
330x480x320 - 12.99x18.89x12.59 mm/inch
Transport Weight:
9.7 / 21.38 Kg/lb
High-power 300-Watt 2-way PA sound reinforcement speaker system for live and playback applications. "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included). Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection. Additional Line output allows linking of additional speaker systems.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User's manual
Reviews
There are no reviews yet.