| Content | Very small size and super light-weight flexible miniature microphone.
5 mm permanently polarized condenser capsule.
Omni-directional polar pattern.
Double vent protection system for use in theatre and spoken word applications.
Comfortable and secure fit with fixed bi-aural headband.
Anti-pop screen
Fitted with 4-pin mini XLR
TECHNICAL SPECIFICATIONS
Transducer type: Back-electret condenser
Polar pattern: Omni-directional
Frequency response: 20Hz - 20KHz
Sensitivity: -45dB± 3dB
Max Input SPL: 130 db
S/N Ratio: >70dB
Nominal Impedance: 1500 ohm ± 30%
Power Supply: 1.5V-10V
Colour: Skin
Dimension: O 5mm
Accessories: Windscreen
Connector: 4-pin mini XLR
Weight: 25 gr
| Τype: |
Headset |
| Colour: |
Beige |
|
Shure WCE6LTD Features:
Smallest, lightest, most comfortable microphone of its kind
User-friendly for new and experienced users alike
Excellent for singing and spoken word applications
Extremely popular in houses of worship, theater and broadcast settings
Almost invisible against many skin tones
Rugged, bendable boom assures a custom fit for every wearer
Hands-free, wireless-enabled microphone allows total freedom of movement
Exclusive snap-on cables in 1mm or 2mm diameter for field replacement or compatibility with various wireless systems
Highly resistant to sweat and moisture
High quality voice pickup - more consistent than any lavalier
Excellent rejection of surrounding noise
Reduces feedback in meeting rooms or houses of worship an average of 12dB compared to an omni lavalier
Omnidirectional microphone is virtually immune to wind and breath pops, even without a windscreen
|
ansducer Type
Electret condenser
Polar Pattern
Omnidirectional
Frequency Response
20 to 20,000 Hz
Output Impedance
N / A
Sensitivity (open circuit voltage, @ 1 kHz, typical)
-41 dBV/Pa (9 mV)
Maximum SPL (1 kHz at 1% THD)
2500 Ω load: 107 dB SPL
1000 Ω load: 107 dB SPL
Signal-To-Noise Ratio
60 dB
Dynamic Range @ 1 kHz
2500 Ω load: 73 dB
1000 Ω load: 73 dB
Self-Noise (equivalent SPL, A-weighted, typical)
34 dB
Operating Temperature Range
-18°C (0°F) to 57°C (135°F)
Polarity
Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1
Power Requirements
+5 V DC (130 μA minimum)
Weight
19.76 g
|
Headset vocal condenser microphone for wired or wireless applications.
The Audix HT2P is a professional head-worn microphone designed for use in performances, aerobics instruction, presentations and more. The HT2P features a frequency response of 50Hz to 15kHz, reproducing audio frequencies associated with vocals with pristine fidelity while eliminating noise at low frequency ranges. The HT2P features a hyper-cardioid polar pattern. The hyper-cardioid pattern provides excellent off-axis signal rejection, minimizing noise due to audio monitors, ambiance, other musicians and more. The headset itself is lightweight and padded for extra comfort, the capsule is completely resistant to moisture
| Shure WH20TQG Dynamic Headset Microphone Shure Performance MicrophonesDynamic Headset Microphone
The improved version of the WH10, the Shure Model WH20TQG is a rugged, light-weight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances. The WH20 is suitable for any voice communications application where comfort and reliability are required.
The WH20 TQG has a cardioid (unidirectional) pickup pattern. This provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources, such as air-conditioning, musical instruments and loudspeakers. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency rolloff to compensate for the proximity effect inherent in cardioid microphones during close-talk operation.
An integrated elastic CROAKIES ? headband secures the headset comfortably. The headband, wireframe, and gooseneck are adjustable to accommodate any head size or shape. The WH20 TQG is supplied with a foam windscreen and clothing clip.
Features:
- Lightweight wireframe and headband adjust for a secure, comfortable fit
- Extra-strong, small-diameter attached microphone cable resists breakage
- Collapsible microphone boom for easy storage and transportation
- Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
- High input clipping level eliminates overload distortion
- Reliable at temperature and humidity extremes
- Supplied foam windscreen and clothing clip
- The WH20TQG has a miniature four-pin female Tini "QG" connector for direct connection to Shure wireless body pack transmitters - This microphone to be used ONLY with an existing Shure body-pack transmitter.
Transducer
|
Dynamic, close-talking |
| Polar Pattern |
Cardioid |
| Frequency Response |
50 Hz to 15 kHz, Measured @ 0.3" (8.0 mm) |
| Power Requirements |
Dynamic (Requires NO Phantom Power) |
| Impedance |
150 ohms (200 ohms actual) |
| Output Level |
Open Circuit Voltage: -67 dB/Pa (1.48' / 0.45 m)
1 Pa = 94 dB SPL
Close-talked (@ 0.50" / 12.5 mm) @ 1,000 Hz |
| Electromagnetic Hum Sensitivity |
38.4 dB equivalent SPL in a 1 mOe field |
| Operating Temperature |
0 to 140°F (-18 to 60°C) |
| Storage Temperature |
-20 to 165°F (-29 to 74°C) |
| Connector |
TA4F connector for Shure bodypack transmitters |
| Cable Length |
4.0' (1.2 m) |
| Dimensions |
Not specified by manufacturer |
| Weight |
2.2 oz (63 g) including connector |
| Packaging Info |
| Package Weight |
0.7 lb |
| Box Dimensions (LxWxH) |
7.6 x 6.4 x 3.1" |
|
High-quality permanently polarized condenser headmic with omni-directional pick-up pattern
| Τype: | Headset | | Series Compatibility: | 3000/5000 Series |
|
Reviews
There are no reviews yet.