| Content | Very small size and super light-weight flexible miniature microphone.
5 mm permanently polarized condenser capsule.
Omni-directional polar pattern.
Double vent protection system for use in theatre and spoken word applications.
Comfortable and secure fit with fixed bi-aural headband.
Anti-pop screen
Fitted with 3.5 mm jack.
TECHNICAL SPECIFICATIONS
Transducer type: Back-electret condenser
Polar pattern: Omni-directional
Frequency response: 20Hz - 20KHz
Sensitivity: -45dB± 3dB
Max Input SPL: 130 db
S/N Ratio: >70dB
Nominal Impedance: 1500 ohm ± 30%
Power Supply: 1.5V-10V
Colour: Skin
Dimension: O 5mm
Accessories: Windscreen
Connector: 3-pin mini XLR
Weight: 25 gr | Suggested for Speech, Head-worn microphone, Sports/Aerobics
- Ergonomically optimized behind-the-neck headband
- Moisture shield
- External shock mount for high mechanical-noise rejection
The C 544 L is a head-worn miniature condenser microphone with a convenient behind-the-neck headband. The microphone has a cardioid polar pattern and therefore "prefers” sounds arriving from the front (from the userʼs mouth).
The microphone body containing the condenser transducer is shock mounted on the microphone arm in order to suppress cable and mechanical noise. The microphone arm will place the microphone in front of the corner of your mouth to minimize pop noise and protect the microphone from contamination. The supplied windscreen makes the microphone even less susceptible to wind and pop noise.
A special moisture shield on the microphone capsule makes it difficult for moisture and makeup to penetrate into the microphone. This barrier prevents the microphone sound entries from being clogged by sweat or makeup which would make the sound dull and reduce the sensitivity of the microphone. Therefore, never remove the moisture shield from the microphone.
The C 544 L is a condenser microphone and therefore needs a power supply.
| Type |
Pre-polarized condenser microphone |
| Polar pattern |
cardioid |
| Frequency range |
20 Hz to 20,000 Hz |
| Sensitivity |
40 mV/Pa (-28 dBV re 1 V/Pa) |
| Max. SPL |
126 dB / 130 dB (for 1%/3% THD) |
| Equivalent noise level (IEC 60268-4) |
22 dB-A |
| Impedance |
200 ohms, electronically balanced |
| Recommended load impedance |
>2000 ohms |
| Supply voltage |
9 V battery supply through B 29 L or bodypack transmitter, or 9 to 52 V universal phantom power through MPA V L adapter |
| Powering |
approx. 2 mA |
| Environment |
temperature: -20°C to +60°C, R.H. at +20°C: 99% |
| Cable |
1.5 m (5 ft.) |
| Finish |
matte black |
| Dimensions |
130 mm (5.2 in.) in dia. |
| Net weight |
30 g (1.1 oz.) exc. of connector |
| Shipping weight |
200 g / 7.1 oz. |
|
The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.
Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.
Included Accessories
- pop filter,
- clip,
- tool kit,
- anti trauma case,
- mini furry,
- micon cable
| Type | Condenser | | Pick Up Pattern | Omni-directional | | Frequency response | 60Hz - 18kHz | | Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz | | Ιmpedance | 3000Ω | | Dimensions | 140.00mmW x 65.00mmH x 200.00mmD | | Weight | 6.50gm | | Accessories | pop filter, clip, tool kit, anti trauma case, mini furry, micon cable |
|
High-quality permanently polarized condenser headmic with omni-directional pick-up pattern
| Τype: | Headset | | Series Compatibility: | 3000/5000 Series |
| Light, easy-to-wear, beige-coloured headset condenser microphone with 3-pin mini XLR connector
- Type: condenser
- Directional characteristic: cardioid
- Frequency response: 70–16,000 Hz
- Nominal impedance: 1.4 kOhm
Product type
Wireless Microphone System Accessories
Type
Headsets
Colour
beige
Frequency response
70 - 16.000 Hz
Directivity
Cardioid
Nominal impedance
1400 Ohm(s)
Max. SPL
125 dB
Phantom power requierements
5 V
Microphone input
Mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
Weight
0,2 kg |
Shure WBH53T Tan Headworn Condenser Microphone
Features of the Shure WBH53 Headworn Microphone:
? Comfortable, latex-free Dynaflex? earforms that hide behind the ears
? Thin, non-reflective wireframe that is easily hidden underneath hair
? Ultra-thin detachable microphone boom mount for right or left positioning
? Interchangeable frequency response caps (mild or high, two pieces each)
? Two foam windscreens included
? Clothing clip for securing cable
? Corrosion resistant
? Easy to clean
? Durable carrying case for protective storage
? Available in either black or tan
? Available with either TA4F connectors or tinned leads (no connector) for full wireless system compatibility
|
Reviews
There are no reviews yet.