Content | Very small size and super light-weight flexible miniature microphone.
5 mm permanently polarized condenser capsule.
Omni-directional polar pattern.
Double vent protection system for use in theatre and spoken word applications.
Comfortable and secure fit with fixed bi-aural headband.
Anti-pop screen
Fitted with 3.5 mm jack.
TECHNICAL SPECIFICATIONS
Transducer type: Back-electret condenser
Polar pattern: Omni-directional
Frequency response: 20Hz - 20KHz
Sensitivity: -45dB± 3dB
Max Input SPL: 130 db
S/N Ratio: >70dB
Nominal Impedance: 1500 ohm ± 30%
Power Supply: 1.5V-10V
Colour: Skin
Dimension: O 5mm
Accessories: Windscreen
Connector: 3-pin mini XLR
Weight: 25 gr | The HCM23 is a ?exible miniature microphone with a simple, fast and comfortable headset system The double vent protection system of the HCM23 makes it ideal for use in theatre and spoken word applications The very small size and the super lightweight provides a comfortable and secure ?t when a discreet, minimum visibility microphone is required Available with 3 different connectors for use with most professional wireless systems currently available
Features
5 mm permanently polarized condenser capsule
Omni-directional polar pattern
Fixed bi-aural headband
Anti-pop screen
Available Connectors: 3.5mm plug (HCM23SE) 3-pin mini XLR (HCM23AK) 4-pin mini XLR (HCM23)
TECHNICAL SHEET
Transducer type: Back electret condenser
Polar pattern: Omni-directional
Frequency response: 20Hz- 20KHz
Sensitivity: -45dB± 3dB
S/N Ratio: >70dB
Nominal Impedance: 1500?± 30%
Power Supply: 1.5V-10V
Colour: Skin
Dimension: Ø5mm
Accessories: Windscreen |
The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.
Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.
Included Accessories
- pop filter,
- clip,
- tool kit,
- anti trauma case,
- mini furry,
- micon cable
Type | Condenser | Pick Up Pattern | Omni-directional | Frequency response | 60Hz - 18kHz | Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz | Ιmpedance | 3000Ω | Dimensions | 140.00mmW x 65.00mmH x 200.00mmD | Weight | 6.50gm | Accessories | pop filter, clip, tool kit, anti trauma case, mini furry, micon cable |
|
Transducer Condenser Polar Pattern Omnidirectional Frequency Response 30Hz to 20kHz +/- 3dB Dynamic Range (Typical) Not Specified by Manufacturer Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL Maximum Input Sound Level 130dB SPL Power Requirements Operating Current: 500uA Operating Voltage: 1 to 2V Power Supply Voltage: +3V with 2.7k ohm Load +5V with 6.8k ohm Load +9V with 15k ohm Load Output Impedance 2k ohms Output Connectors TA4-Female Connector for Shure Wireless Transmitters Dimensions Not Specified by Manufacturer Weight 0.07 oz (2g) | Headset Mikrofon for WS 100 Series, WS 1000 Series, WS 1616 Series and WS ECO Series
- Uni-directional Electret Condenser Headset Microphone
- Impedance
- Frequency range : 20Hz - 20 KHz
- Sensitivity : -44 ± 2 dB (at 1 KHz)
Product type
Wireless Microphone System Accessories
Type
Headsets
Frequency response
20 - 20.000 Hz
Directivity
cardioid
Nominal impedance
680 Ohm(s)
Phantom power requierements
5 V
Microphone input
mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
Weight
0,06 kg |
ansducer Type
Electret condenser
Polar Pattern
Omnidirectional
Frequency Response
20 to 20,000 Hz
Output Impedance
N / A
Sensitivity (open circuit voltage, @ 1 kHz, typical)
-41 dBV/Pa (9 mV)
Maximum SPL (1 kHz at 1% THD)
2500 Ω load: 107 dB SPL
1000 Ω load: 107 dB SPL
Signal-To-Noise Ratio
60 dB
Dynamic Range @ 1 kHz
2500 Ω load: 73 dB
1000 Ω load: 73 dB
Self-Noise (equivalent SPL, A-weighted, typical)
34 dB
Operating Temperature Range
-18°C (0°F) to 57°C (135°F)
Polarity
Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1
Power Requirements
+5 V DC (130 μA minimum)
Weight
19.76 g
|
Reviews
There are no reviews yet.