| Content | Permanently polarized condenser capsule, omni-directional polar pattern, ideal for MCs or worship leader, backplate electret condenser transducer type.
Overview
- Permanently polarized condenser capsule.
- Omni-directional polar pattern.
- Ideal for MCs or worship leaders.
Technical Specifications
- Transducer type: backplate electret condenser
- Polar pattern: omnidirectional
- Frequency response: 80 Hz - 16 KHz
- Sensitivity: 52 dB +-3 dB
- Maximum SPL for 1% THD: 128 dB
- Nominal Impedance: 680 ohm
- Reccommended Load Impedance: 3000 ohm
- Power Supply: 1.5-7V DC
- Connectors: 3.5mm threaded mini-jack
|
Shure cable with base WL180N fits with R183/184/185 |
Type Condenser - Omni
Frequency Ressponse 60Hz - 18kHz
Sensitivity -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Resistance 3000Ω
Dimensions 4.50mmW x 12.00mmH x 4.50mmD
Weight 1.00gm
Accessories Αntitrauma case,WS-LAV, Minifur LAV, Micon cable, Spanner |
The Shure MX150 Subminiature Lavalier Microphone is a subminiature, multi-positioned clip-on microphone well suited for broadcast operation, sermons, presentations, public address and much more. This version includes the RK100PK XLR in-line preamplifier for use with standard XLR connections in mixers, recorders, mic-pres, etc. Shure's CommShield technology makes the MX150 impervious to noise caused by cell phones, PDAs, WiFi and other RFI. The microphone ships with a snap-fit foam windscreen and multi-position tie clip with an integrated cable management system that minimizes noise without increasing cable strain and tension. Omnidirectional polar pattern and wired XLR connection CommShield Technology guards against interference from cellular RF devices and digital bodypack transmitters Matte black, sleek design for inconspicuous placement Multi-position tie clip allows for a variety of placement options and features an integrated cable management system for convenient cable dress with minimal handling noise Kevlar-reinforced soft-flex cable design further reduces handling noise while providing superior flexibility for routing and placement User-changeable equalization caps for response shaping (omnidirectional only) Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility Legendary Shure quality, ruggedness, and reliability Transducer
| Electret condenser | | Polar Pattern | Omnidirectional | | Frequency Response | 20 to 20,000Hz | | Output Impedance | 165.0 Ω | | Sensitivity | -34.5 dBV/Pa (19.0 mV) | | Max Input Sound Level (SPL) | 1000 Ω load: 125.0 dB SPL; 2500 Ω load: 130.0 dB SPL | | Signal-to-Noise Ratio | 59.5 dB | | Dynamic Range | @1kHz
1000 Ω: 90.5 dB SPL; 2500 Ω load: 95.5 dB SPL | | Self Noise | 34.5 dB
(equivalent SPL, A-weighted, typical) | | Clipping Level | 1000 Ω load: 1.0 dBv; 2500 Ω load: -4.5 dBv | | Operating Temperature | Operating: 0 to 135°F (-18 to 57°C)
Storage: -20 to 165°F (-29 to 74°C) | | Polarity | XLR: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 | | Power Requirements | 11-52VDC phantom power (IEC-61938), | | Dimensions (LxDiameter) | Length: 5' (1.52m)
Diameter: 0.23" (5.8mm) | | Weight | 4.3 oz (121 g) |
|
This clip-on lavalier mic provides crisp, full-sounding voice pickup. The AT831R also excels as an instrument mic, especially for pickup of acoustic guitar with included AT8444 guitar adapter. The mic is ideal for higher SPL applications. Excellent gain before feedback and suppression of background noise. Operates on phantom power only.
Clip-on lavalier mic also excels in acoustic guitar applications
Provides crisp, full-sounding voice and instrument pickup
Excellent gain before feedback and suppression of background noise
Operates on phantom power only
4.0 m (13.1') cable permanently attached to mic, TA3F connector at power module
RoHS compliant - free from all substances specified in the EU directive on hazardous substances
Also available as: AT831b - with battery/phantom power module AT831c - less power module; includes clothing clip and windscreen only; 10' (3 m) cable, unterminated AT831cW - less power module; includes clothing clip and windscreen only; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak® wireless systems AT831cT5 - less power module; includes clothing clip and windscreen only; 55" (1.4 m) cable terminated with TA5F connector for ATW-U101 body-pack wireless system
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 40-16,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
Impedance: 250 ohms
Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 112 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Switch: Flat, roll-off
Cable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13“) diameter, 2-conductor, shielded cable with TA3F-type connector
Accessories: AT8417 clothing clip; AT8444 guitar adapter; AT8538 remote power module; AT8116 windscreen; protective carrying case
|
Technical Data
Frequency response 40...20.000 Hz
Sensitivity as per 121 TR 9-5 42 mV/Pa +- 3dB
Maximum sound pressure level (passiv) 118 dB (k=1%)
Pick-up pattern cardioid
Dimensions d=12mm, l=26mm
|
Reviews
There are no reviews yet.