| Content | FBT Project 550BT 50W, 100v/8 ohm fashion speaker in black, including mounting bracket.
The Project series of loudspeakers are manufactured in impact-resistant ABS and are supplied with a comprehensive mounting bracket and safety cable point. All models offer 100v power taps and 8 ohm bypass facility.
Features
2-way Bass reflex systems with 0.5" dome tweeter
5” woofer + 1” tweeter
50W 100V line / 100W 8 ohm output
ABS housing with metal grille
Frequency Response:80Hz~20KHz
Max. SPL: 109dB
Dispersion: 100°(H) x 100°(V)
Fully adjustable die cast mounting bracket (ball joint)
Supplied with safety wire |
100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.
Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin
|
FEATURES
Compact box speakers for music and voice paging distribution
Excellent sound quality
Twelve new models:
Black or white
Indoor
Outdoor (IPX4)
Low impedance (8 ohm) or 70/100V versions
Octagonal horn design for smooth coverage
Adjustable high frequency dispersion (F-2000 models)
Extruded cabinet design improves low frequency performance
Individual protection circuit on each component
Screwdriver-adjustable power taps (70/100V models)
Paintable grille and enclosure
Wall/ceiling-mount bracket included
Optional board, cluster and pole-mount brackets
OmniMount-compatible (F-2000 models only, Series 20.5CA/WA)
Optional subwoofers, model HB-1, FB-100 or FB-120
Five year warranty
F-1300 Series
LF Driver: 5” cone woofer
HF Driver: 1” dome tweeter
Crossover: 2kHz
Power Handling: 150W (cont. PGM)
50W (pink noise)
30W (70V transformer version)
Sensitivity (1W, 1m): 90dB SPL
Dispersion: 110° H x 100 ° V
F-1300B (indoor, black, 8 ohm)
F-1300W (indoor, white, 8 ohm)
F-1300BT (indoor, black, 70V)
F-1300WT (indoor, white, 70V)
F-1300BTWP (outdoor, black, 70V)
F-1300WTWP (outdoor, white, 70V)
|
BS-1030B and BS-1030W Music/Paging Speakers
The TOA BS-1030 Music/Paging Speaker has exceptional sound quality and value for a wide variety of applications. Available in black and white, the versatile BS-1030 is designed for both indoor and outdoor use with a durable ABS resin enclosure and steel mesh grille. The two-way, bass-reflex design features a 4.72" (12 cm) cone woofer, 1" (2.5 cm) dome tweeter and built-in multi-tap transformer with screwdriver-adjustable power taps. A transformer bypass setting allows direct 8-ohm operation. Installation is fast and easy with the supplied mounting bracket or rear panel keyholes for horizontal or vertical surface-mounting. The BS-1030 speakers are backed with a five year warranty.
Also see the new FB-100 and HB-1 Subwoofers.
FEATURES:
Indoor and Outdoor Applications Mounting Bracket Included Paintable Enclosure Two-Way, Bass-Reflex Design 70.7/100 V and 8-Ohm Screwdriver-Adjustable Tap Settings Black (BS-1030B) and White (BS-1030W) |
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
| BS-33AT | | | Rated Input: | 6W (100V line), 3W (70V line) | | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W) | | Sensitivity: | (1W, 1m): 91dB | | Frequency Response: | 120 – 15,000Hz (–20dB) | | Speaker Component: | 5" (12cm) cone-type | | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | | Connetion: | Push-in connector (bridging terminal) | | Attenation Level: | 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) | | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | | Finish: | Case: ABS resin, off-white | | Rear bord: | Hard board | | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control) | | Wall Mounting Case front mount: | 184mm (7.24“) | | Dimensions: | Fixing hole mount: 120mm (4.72“) | | Weight: | 810g (1.79 lb) | | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2 |
|
The F-2000 Series Speaker are compact two-way speaker systems designed for high efficiency, wide range, and high power input handling capability. These speaker systems can be installed in a manner ideal for the location and intended application. The F-2000WTWP features a water-proof design (splash-proof type meeting IPX4 standard), so that it can be permanently installed outdoors.
| Enclosure | Bass-reflex type | | Rated Input | 60 W | | Rated Impedance | 100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), 3.3 kΩ (3 W)
70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 3.3 kΩ (1.5 W) | | Sensitivity | 92 dB (1 W, 1 m) at installation in 1/2 free sound field
93 dB (1 W, 1 m) at installation in 1/2 free sound field (with horn adapter) | | Frequency Response | 65 - 20,000 Hz, -10 dB at installation in 1/2 free sound field | | Crossover Frequency | 2.5 kHz | | Directivity Angle | Horizontal: 110゜, Vertical: 100゜ Horizontal: 80゜, Vertical: 80゜ (with horn adapter) | | Speaker Component | Low frequency: 20 cm (8) cone-type High frequency: 25 mm (1“) dome tweeter“ | | Input Terminal | Push-in terminal | | Water Protection | IPX4 | | Operating Temperature | -10℃ to +50℃ (14゜F to 122゜F) | | Finish | Enclosure: HIPS, white
Punched net: Surface-treated steel plate, white, anticorrosive paint
Joint bracket, wall bracket: Stainless steel (SUS304), t2.0
Speaker bracket: Die-cast aluminum, white, paint | | Dimensions | 244 (W) × 373 (H) × 235 (D) mm (9.61 × 14.69" × 9.25“)“ | | Weight | 7.4 kg (16.31 lb) (including the supplied brackets) | | Accessory | Speaker bracket …1, Joint bracket …1, Wall bracket …1, Bracket fixing screw … 1 set,
Horn adapter …1, Horn adapter mounting screw …4, Terminal cover …1,
Terminal cover mounting screw …4 | | Option | Speaker mount bracket: SP-131, YS-60B |
|
Reviews
There are no reviews yet.