JTS PT950B-CM501 Wireless Microphone Set

JTS PT950B-CM501 Wireless Microphone Set

JTS PT-950B

UHF PLL pocket transmitter with lavalier microphone

All instrument microphones of the CX serires as well as headband microphones and lavalier microphones of the CX
series or CM series can be operated via this stable pocket transmitter without interference. The PT-950B is supplied
with the high-quality lavalier microphone CM-501; its frequency response which has been optimised for speech
applications guarantees max. audibility. 193 frequencies with pilot tone technology offer highest flexibility and safe transmission.

The integrated LC display provides reliable information about battery status and transmitting frequency. Continuously adjustable
gain and lock function are indispensable features for professional applications.

Supplied with stable transport box.

Features:

Carrier frequency 790-814MHz   
Audio frequency range 40-18,000Hz   
Frequency stability  ±0.005%   
Transmitting power 10mW   
Connections 4-pole mini XLR   
Power supply  2 x batt. AA size, alkaline   
Operating time > 30h   
Dimensions 70x190x27mm (WxHxD)   
Weight  160g

JTS CM501

Electret lavalier microphone

This microphone is cut out for presentations and discussions. It guarantees good audibility, a secure fit due to the supplied tie clip
and is quickly to install. The cartridge design of cardioid characteristic allows to pick up a precise voice of high quality over a wide dynamic range.

Supplied with windshield.

Features:

System electret/cardioid   
Frequency range 100-15,000Hz   
Impedance  2.2kΩ   
Sensitivity 3.2mV/Pa/1kHz   
Max. SPL 130dB   
Power supply  pocket transmitter
PT series or PS-500   
Connections  cable with 4-pole mini XLR   
Weight  20g

Set with portable 3.5mm TRS transmitter and portable 3.5mm receiver without a lavalier microphone

General Characteristics

• Wireless entry-level plug & play series operating in the 2.4 GHz spectrum for license-free worldwide use
• Lightweight, compact plug-on transmitters and receivers, offering either XLR, jack (6.3mm, 1/4”) or mini jack (3.5mm, 1/8”) connections as well as a pedalboard receiver with female jack and XLR male chassis outputs
• Intuitive single-button interface to manage all power, linking, muting and battery monitoring tasks
• Up to 5 systems can be operated simultaneously at a maximum range of up to 75m
• All portable devices feature USB re-chargeable lithium-ion batteries that provide up to 5 hours of runtime 

• XSW-D-Mini-Jack-Tx 3.5mm female socket portable transmitter
• XSW-D-Mini-Jack-Rx female socket portable receiver
• Belt clip for the XSW-D-Mini-Jack-Tx transmitter
• Cold shoe mount
• 3.5mm coiled cable
• USB-A to USB-C charging cable

For vocalists, performers and active spoken word presenters, the XD-V35 family sets new standards for reliability, ease of use and superior audio quality. Both the handheld and lavalier microphones feature patented digital technologies that deliver sound so impressive they inspire great performances. The entire signal chain remains pristine, uncompressed and protected by DCL™ (Digital Channel Lock) technology.

Every performer knows that you sound your best when you can perform with confidence. The unique versatility and reliability of XD-V35 systems ensure a confident performance every time you hit the stage.

Featuring 24-bit precision for a full frequency response of 10Hz to 20kHz and a wide dynamic range of up to 118dB (A weighted), XD-V35 digital wireless signals are so clear and strong that they sound and perform as if youʼre using a wired microphone.

Unlike analog wireless systems, XD-V35 digital wireless systems never use signal companding to compress and expand the signal, so you always have full dynamic range. XD-V wireless systems allow you to convey every nuance of your performance to the audience in the most natural way, and with crystal clarity.

Inspire your audience. High flexibility for those willing to go a step further. XS WIRELESS 2 grows with your demands by offering an intuitive LCD display for more manual options and 12 compatible channels in a stable UHF band, withstanding tougher live stage conditions.The XS WIRELESS 2 LAVALIER MIC SET is an easy to use all-in-one wireless system for presenters and moderators, excellent for a powerful and inspiring presentation. The set includes a stationary receiver for quick set-up and hassle-free handling, as well as a lightweight bodypack transmitter and an unobstrusive clip-on microphone. Metal receiver housing and rackmount kit included.
FEATURES

• Unobstrusive clip-on microphone for hands-free operation and compact bodypack transmitter
• True diversity receiver with metal housing
• External antennas
• Automatic frequency management and synchronization via remote channel for easy setup
• Fully tunable over a wide range of UHF frequencies
• Rackmount kit included
• Up to 12 compatible channels
• Microphone: Condenser 
• Frequency response 50 to 16,000 Hz (–3 dB) 
• THD, total harmonic distortion ≤ 0.9% 
• Pick-up pattern Omni-directional 
• Signal-to-noise ratio ≥ 103 dBA 
• RF output power 10 mW 
• Switching bandwidth up to 24 MHz 
• Modulation Wideband FM 
• Output voltage '1/4" (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu 
• Diversity reception True Diversity 
• Frequency 8 frequency banks, each with up to 12 factory-preset channels 
• Frequency range A: 548-572 MHz, GB: 606-630 MHz, B: 614-638 MHz, C: 766-790 MHz, D: 794-806 MHz, E: 821-832 MHz, 863-865 MHz, K: 925-937.5 MHz 
• Sensitivity
• Squelch switchable from 3 dBμV to 28 dBμV (via Pilot Tone) 
• Synchronization 2.4 GHz, Low Power OQPSK (only active during synchronization) 
• Adjustment Range Transmitter 0 to -30 dB, adjustable in 10 dB steps 
• Audio adjustment range 40 dB, adjustable in 5-dB steps 
• Line / Mic level 20 dB, switchable 
• Temperature Range operation: 0°C to +40°C, storage: –20°C to +70°C 
• Receiver Principle double superheterodyne 

• 1 receiver EM-XSW 2
• 1 bodypack transmitter SK-XSW
• 1 lavalier microphone ME 2-2
• 1 power supply NT 12-5 CW
• 2 AA batteries
• 1 rackmount kit
• 1 pouch
• user manual

• Dimensions approx. 200 x 42 x 127 mm 
• Weight approx. 680g 
• Power supply 12 V DC nom. / 300 mA 
• Housing Metal 
• AF frequency response 50 to 16,000 Hz 

• Dimensions approx. 71 x 96 x 28 mm 
• Weight approx. 95g 
• Operating time approx. 10 hrs 
• Power supply 2 AA size batteries, 1.5 V 
• Housing Robust ABS 
• AF frequency response 50 to 16,000 Hz (–3 dB) 

General Description

Make your presentations come to life. The included omni-directional microphone provides natural speech reproduction while remaining inconspicuously small. The bodypack transmitter has a rechargeable battery option so you can concentrate on your presentation - not on purchasing batteries. Demand the best in wireless presentation technology with quick setup, user-friendly operation, and absolute reliability due to the true diversity receiver. Now featuring wireless infrared transmitter sync for easy setup.

• Sturdy metal housing (transmitter and receiver
• 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
• Enhanced frequency bank system with up to 12 compatible frequencies
• High-quality true diversity reception
• Pilot tone squelch for eliminating RF interference when transmitter is turned off
• Automatic frequency scan feature searches for available frequencies
• Enhanced AF frequency range
• Increased range for audio sensitivity
• Wireless synchronization of transmitters via infrared interface
• User-friendly menu operation with more control options
• Illuminated graphic display (transmitter and receiver)
• Auto-Lock function avoids accidental changing of settings
• HDX compander for crystal-clear sound
• Transmitter feature battery indicatation in 4 steps, also shown on receiver display
• Programmable Mute function
• Integrated Equalizer and Soundcheck mode
• Contacts for recharging BA 2015 accupack directly in the transmitter
• Wide range of accessories adapts the system to any requirement

• 1 EM 100 G3 rack-mount receiver
• 1 SK 100 G3 bodypack transmitter
• 1 ME 2 clip-on microphone (omnidirectional pick-up pattern)
• 1 NT 2 power supply unit
• 2 antennas
• 2 stacking elements
• 2 AA batteries
• Operating instructions