KEF Q950 Floor Speaker 2 and 1/2 Way 15-150W 91dB 8inch White

“Sit anywhere" Uni-Q Sound

At the heart of the evolved Q Series is the Uni-Q driver array. KEF\'s signature innovation places the tweeter in the acoustic center of the midrange cone, bringing the acoustic ideal of a single point source closer than ever to realisation. The result is a more detailed, more accurate three-dimensional sound image, which is dispersed more evenly throughout the room than is possible with a conventional speaker. Uni-Q\'s ultra-wide dispersion is further enhanced by KEF\'s \'tangerine\' waveguide over the tweeter dome.

Uni-Q sound taken to the next level

The closed box midrange cabinet design reduces the load on the Uni-Q midrange cone, increasing clarity and detail while delivering cleaner, punchier bass.

With the addition of the Damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass response.

Redesigned Bass Drivers

Low-frequency (LF) drivers now have a larger roll surround, along with a new spider suspension to produce cleaner bass at high volumes. A new cone structure improves midrange clarity, and an enhanced Auxiliary Bass Radiators (ABRs) with a new surround and rear suspension delivers better controlled and more impressive bass.

Redesigned Bass Drivers

Low-frequency (LF) drivers now have a larger roll surround, along with a new spider suspension to produce cleaner bass at high volumes. A new cone structure improves midrange clarity, and an enhanced Auxiliary Bass Radiators (ABRs) with a new surround and rear suspension delivers better controlled and more impressive bass.

Floorstanders
Q950 is the flagship model of the Q Series range, featuring the KEF signature Uni-Q driver array paired with 200mm (8 inch) long-throw bass driver and matching ABRs. With the latest enhancement in acoustics and design, Q950 brings high resolution sound with extraordinary depth and exceptional clarity. Priced as a Pair speaker.

Single Ported HiVe® II technology
Sealed Mid-range TLE®
2 x 6.5” long-throw RDT® bass drivers
1 x 4” RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather.
Finish options: Santos Rosewood veneer with clear gloss piano lacquer
Ebony veneer with clear gloss piano lacquer
Piano black gloss
Optional dedicated floor stands are available

Frequency Response: 35 Hz - 100 KHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 4 Ohms
Maximum S.P.L
(Per pair in room): 117.8 dBA
Power Handling (RMS): 250 W
Recommended Amplifier Requirements (RMS): 100 - 250 W
Bass Alignment: Rear Ported HiVe®II technology
Sealed Mid-range TLE®
Mid / H.F Crossover Frequency: 3600 Hz
Bass Low Pass Crossover Frequency: 600 Hz
Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
External Dimensions -
Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm
(39 5/16 x 14 3/16 x 14 3/4 inches)
Weight (each) Including Plinth: 33Kg (72.7 lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES

Dimensions | Metric :7" W x 11" D x 35" H | 17.8 x 27.9 x 88.9 cm
Driver Complement :Two 1” pure aluminum dome tweeters; Two 5.25” high definition bass/midrange drivers
Frequency Response :25 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 175 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of five way binding posts
Accessories :Feet; Isolation Spikes
Weight | Metric :42 lbs | 19.1 kg
Available Finishes :Piano-Gloss Black
Packaging :One to a carton
Warranty :5 Years

Dimensions | Metric :46" H x 8-1/2" D x 5-1/2“W | 116.8 x 21.6 x 14.0 cm
Height with Base | Metric :47.5" | 120.7 cm
Base Dimensions | Metric :10-1/2" W x 14" D | 26.7 x 35.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" BDSS midrange drivers; One 5" x 10" long-throw racetrack subwoofer pressure coupled to two 5" x 10" long-throw racetrack radiators.
Frequency Response :16 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :93 dB
Recommended Associated Amplifier Power :20 – 250 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :300 watt
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
Inputs :One pair of 5 way binding posts; One LFE input (optional)
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Granite
Accessories :Plastic foot tippers; Isolation spikes
Packaging :One to a carton
Weight | Metric :54 lbs | 24.5 kg
Warranty :5 Years; 3 Years for Amplifiers

Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak