€73.00 incl. GR VAT
Available on backorder
EAN: N/A
| Αpplication: | Amplifier |
| Type: | Adjustable |
| Type: | Single |
| Weight | 1.00 kg |
|---|
| QUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp remove | PALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox remove | QUIKLOK BS-317 Low Profile Amp Stand remove | KONIG & MEYER 14330 "Jazz" Saxophone stand remove | PALMER AUDIO PCABM CAB M - Passive Cabinet Merger remove | PALMER GA 03 Splitter for Guitars Y-Box Active remove | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | QUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp remove | PALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox remove | QUIKLOK BS-317 Low Profile Amp Stand remove | KONIG & MEYER 14330 "Jazz" Saxophone stand remove | PALMER AUDIO PCABM CAB M - Passive Cabinet Merger remove | PALMER GA 03 Splitter for Guitars Y-Box Active remove | ||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||
| SKU | G30QL00000 | PGA04 | G30QL00002 | M19KM00023 | PCABM | PGA03 | ||||||||||||
| Rating | ||||||||||||||||||
| Price | €73.00 incl. GR VAT | €386.42 incl. GR VAT | €49.00 incl. GR VAT | €49.00 incl. GR VAT | €28.51 incl. GR VAT | €117.79 incl. GR VAT | ||||||||||||
| Stock | Available on backorder | Available on backorder | In stock | In stock | Available on backorder | Available on backorder | ||||||||||||
| Availability | Available on backorder | Available on backorder | In stock | In stock | Available on backorder | Available on backorder | ||||||||||||
| Add to cart | ||||||||||||||||||
| Description |
| |||||||||||||||||
| Content |
|
Also available as 2, 4 and 16 Ohm Versions Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds. Technical specifications:
|
Double-Brace, Low Profile Stand for Large Amps and Combos Height adjustment range Front tier: 8.25" to 11" - 21 to 28 cm Back tier: 11.4" to 18.6" - 29 to 47.2 cm Width: 19.3" - 49 cm Folded height: 22" - 56cm Frame tube size: 20 x 15 mm Tier tube size: 28mm Weight capacity: 100lb - 45.2 kg Weight: 6.6 lb - 3 kg |
Practical, easy to use and stable stand for Eb alto saxophones. Solid square-type aluminum tubes with a large central locking screw, protective rubber bumps where the stand connects with the saxophone body and the bell. Embedded foot end caps. Folds compactly, can be transported in the supplied velour bag in the saxophone bell.
|
The concept behind the cab merger may be very simple, but it fills an important gap! Have you ever wanted to connect two guitar cabinets to one amplifier output? The PCABM makes it possible. In addition, you can select whether the cabinets should be wired in parallel or series with one another. For example, if you interconnect two 8 ohm cabinets. The PCABM offers you two resulting impedances to choose from: 4 ohms (parallel) or 16 ohms (serial). The device is passive and does not affect the tone in any way.
|
"When I run my guitar into two amps simultaneously, I always get a loud hum". This is a rather common problem, often discussed in the technology section of relevant industry magazines. The Palmer Y box is the solution. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended.
The PGA03 Y-box can also be used as a line driver for long cable runs. Also, the PGA03 features a phase reverse switch for the AMP 2 output when using pre-amps or amps that are out of phase.
Technical specifications:
Product type
Splitters
Split type
1 in 2
Inputs
1
Input connectors
6.3 mm jack
Adjustable input
no
Number of split-outputs per canal
1
Output connectors
6.3 mm jack
THRU outputs/channel
1
Transformer isolated outputs
Yes
Adjustable output
no
Controls
ground lift, phase
Indicators
Power
Operating voltage
9 V block, 9 V DC power supply
Width
125 mm
Depth
80 mm
Height
45 mm
Cabinet material
sheet steel
Cabinet surface
Powder coated
Weight
0,528 kg
| ||||||||||||
| Weight | 1.00 kg | 2.70 kg | 3.10 kg | 0.30 kg | 0.13 kg | 0.25 kg | ||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||
| Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.