QUIKLOK BS-317 Low Profile Amp Stand

49.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Double-Brace, Low Profile Stand for Large Amps  and Combos Height adjustment range Front tier: 8.25″ to 11″ – 21 to 28 cm Back tier: 11.4″ to 18.6″ – 29 to 47.2 cm Width: 19.3″ – 49 cm Folded height: 22″ – 56cm Frame tube size: 20 x 15 mm Tier tube size: 28mm Weight capacity: […]

 

Read more

Double-Brace, Low Profile Stand for Large Amps 

and Combos

Height adjustment range

Front tier: 8.25″ to 11″ – 21 to 28 cm

Back tier: 11.4″ to 18.6″ – 29 to 47.2 cm

Width: 19.3″ – 49 cm

Folded height: 22″ – 56cm

Frame tube size: 20 x 15 mm

Tier tube size: 28mm

Weight capacity: 100lb – 45.2 kg

Weight: 6.6 lb – 3 kg

Weight 3.10 kg

Reviews

There are no reviews yet.

Be the first to review “QUIKLOK BS-317 Low Profile Amp Stand”

Your email address will not be published. Required fields are marked *

Quick Comparison

QUIKLOK BS-317 Low Profile Amp Stand removePALMER PMBLA Pro PMBLA - Dual Channel Line Merger active removeMOTU ZBox Amplify guitar tone removeGRANITE T-1C Drum Stool 280mm removeQUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp removePALMER GA 03 Splitter for Guitars Y-Box Active remove
NameQUIKLOK BS-317 Low Profile Amp Stand removePALMER PMBLA Pro PMBLA - Dual Channel Line Merger active removeMOTU ZBox Amplify guitar tone removeGRANITE T-1C Drum Stool 280mm removeQUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp removePALMER GA 03 Splitter for Guitars Y-Box Active remove
Imagegranite_t_1c_adjustable_seatpalmer audio GA03_splitter box guitars active
SKUG30QL00002PMBLAzboxM29GN00002G30QL00000PGA03
Rating
Price 49.00 incl. GR VAT 428.88 incl. GR VAT48.39 incl. GR VAT 39.00 incl. GR VAT 73.00 incl. GR VAT 117.79 incl. GR VAT
Stock

In stock

Available on backorder

In stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderIn stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionAdjustable drum stool, diameter 280mm
  • Clinking input with 1 Mohm input impedance
  • Output AMP1 as parallel circuit
  • Output AMP2 is electronically converted with a subsequent transformer stage
  • Operation with 9V battery recommended
  • 5 years manufacturing guarantee
Content

Double-Brace, Low Profile Stand for Large Amps  and Combos Height adjustment range Front tier: 8.25" to 11" - 21 to 28 cm Back tier: 11.4" to 18.6" - 29 to 47.2 cm Width: 19.3" - 49 cm Folded height: 22" - 56cm Frame tube size: 20 x 15 mm Tier tube size: 28mm Weight capacity: 100lb - 45.2 kg Weight: 6.6 lb - 3 kg

The PMBL-ACTIVE is a 2-channel stereo line level merge box that can be used to merge two stereo line signals into one stereo output. One classic application: routing two mixing desks to one PA system. The unit has enough amplification to boost even semi-professional levels accordingly. The input channels are galvanically isolated from one another. Each channel offers a mute switch and the ability to mix the stereo signal down to mono. The unit is housed in a 1 U/9.5" case and has a built-in power supply.

 


ZBox Overview Take back your guitar tone! Today's guitar amp modeling plug-ins are simply amazing in their ability to faithfully model real guitar amplifiers. From IK Multimedia's Amplitube, to Waves, to Native Instruments, to Line 6, to Digital Performer's included Custom '59, you can plug your guitar directly into your audio interface, dial up a guitar tone in your plug-in software, and play. The sound is simply stunning. But wait. They're ALL MISSING SOMETHING. In fact, they're missing a crucial element of the signal path that simply cannot be modeled in software: the proper input impedance of a real guitar amplifier. When you plug your guitar into your audio interface, the interface's impedance does not match the typical levels found on a real guitar amplifier. The result? No matter how hard you try, you'll never quite be able to replicate the true sound and "feel" of playing into a real guitar amp. The sound will be just a little more thin and unresponsive than the real thing. The solution? ZBox! ZBox matches the output impedance (”Z”) of your guitar to the impedance of a non-amp input, such as the mic/instrument preamp inputs on your audio interface. Without proper impedance matching, your guitar wonʼt sound natural or "feel right”. ZBoxʼs unique advantage? Authentic matching circuits that emulate the two-jack switching network found on many classic amplifiers, complete with analog simulation of the input tube grid. Only ZBox delivers the most authentic amplifier impedance matching available for the absolute truest sound and "feel” from your guitar. ZBox is the "missing link” for digital guitar processing, providing the hardware-driven input characteristics required to truly emulate a real guitar amp. If you use Digital Performer's Custom 59 amp model plug-in, or a third-party guitar plug-in product like IK Multimedia Amplitube, Waves GTR, Native Instruments Guitar Rig, or similar guitar modeling software, use ZBox to further enhance the authenticity of the tones you play from these products! Just plug your guitar into ZBoxʼs Lo-Z or Hi-Z input (whichever sounds better), and plug the ZBox into the guitar input on the destination device (audio interface, wireless box, mixer, recorder, PA, etc.) as shown. Guitar inputs on audio interfaces, mixers, PAs, wireless transmitters and other similar devices (often labeled "instrument”) usually have impedances that differ significantly from most guitar amps. This mismatch can make your guitar sound too bright, thin and brittle. ZBox provides the proper input impedance levels to match your guitarʼs output signal. The result? Your guitar sounds like it is connected to a real guitar amp and has a much warmer tone and authentic "response.” This is especially true when using digitally modeled guitar processing software (plug-ins) on your computer, audio interface, digital mixer, etc. To support a wide range of guitars, ZBOX provides authentic "Hi-Z” and "Lo-Z” inputs, just like the ones found on many classic guitar amps, complete with analog simulation of the input tube grid.Adjustable drum stool, diameter 280mm
Drums seat adjustable in height (500mm-630mm), Anatomical round saddle with a diameter of 280mm, Tube diameter: 28.6mm/25mm, Legs double reinforced with anti-slip protectors at the ends.
  • Large amp "X” stand with adjustable back tier
  • Adjusts so that the back tier rests on the back panel of open back guitar amps/combos and does not enter the empty space
  • This unique design assures no damage to tubes or electronics
  •  
  • Αpplication: Amplifier
    Type: Adjustable
    Type: Single
     
  • "When I run my guitar into two amps simultaneously, I always get a loud hum". This is a rather common problem, often discussed in the technology section of relevant industry magazines. The Palmer Y box is the solution. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended. The PGA03 Y-box can also be used as a line driver for long cable runs. Also, the PGA03 features a phase reverse switch for the AMP 2 output when using pre-amps or amps that are out of phase.  
    Technical specifications:
    Product type
    Splitters
    Split type
    1 in 2
    Inputs
    1
    Input connectors
    6.3 mm jack
    Adjustable input
    no
    Number of split-outputs per canal
    1
    Output connectors
    6.3 mm jack
    THRU outputs/channel
    1
    Transformer isolated outputs
    Yes
    Adjustable output
    no
    Controls
    ground lift, phase
    Indicators
    Power
    Operating voltage
    9 V block, 9 V DC power supply
    Width
    125 mm
    Depth
    80 mm
    Height
    45 mm
    Cabinet material
    sheet steel
    Cabinet surface
    Powder coated
    Weight
    0,528 kg
    Optional Power Supply PW9V
    Weight3.10 kg1.51 kg7.00 kg2 kg1.00 kg0.25 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 3.10 kg
    Weight 1.51 kg
    Weight 7.00 kg
    Weight 2 kg
    Weight 1.00 kg
    Weight 0.25 kg