| Content |
36" (91cm) Fixed Height Near-Field Monitor / Speaker Stand
![]() Perfect for home, project or professional recording studios
![]() All-steel, arc welded construction. NO fibre or chipboard
![]() Attractive design incorporating cable management
![]() Solid triangular base with adjustable levelling floor spikes
![]() Vertical columns may be sand loaded to deaden sound and increase stability
![]() Sturdy metal top plate measures 11" square (28 cm)
![]() 120 lb (54 kg) weight capacity
Speaker plate dimensions: 11" square - 28cm square
Fixed Height: 36" - 91.4cm
Base Size: 17.7" square - 45 cm square
Weight capacity: 125 lb - 57kg
Weight: 13.3 lb - 6kg
|
- Rubber support surface for a stable stand of the monitors
- Robust construction; Tilt angle ± 10 degrees
- Variable table mounting (max. 55mm)
- Height adjustable in 4 steps from 235mm to 280mm
- Monitor support surface: 220mm x 180mm
- Maximum load: 15kg
- Weight: 1,45kg
|
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available.
Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base edge length
100X70 mm
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
| The Gravity GSP 3202 studio monitor stand has a heavy, triangular cast iron base. And the monitor tray is 250 mm x 250 mm in size with foam pads for damping. It is height-adjustable from 900 mm to 1500 mm for optimum speaker positioning and comes with a set of spikes. Mounted to the integrated large rubber feet, they achieve an effective coupling to the floor.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
900 mm
Max height
1500 mm
Height adjustment
Clamp with safety pin
Base type
3-point
Base material
Cast iron
Base edge length
292.5 mm
Lower connector
M20
Tubing diameter
42 mm / 35 mm
Max. load
50 kg
Interchangeable rings
1 x 25 mm , 1 x 30 mm
Weight
6,5 kg
Additional information
Including acoustic isolation spikes |
| Product type |
Stands and Tripods |
| Type |
Speaker Stands |
| Material |
Steel |
| Color |
Black |
| Min. height |
150 mm |
| Max. height |
250 mm |
| Bearing surface |
160 x 180 mm, EVA padded |
| Height adjustment |
Adjusting screw |
| Base material |
Steel |
| Base edge length |
220 x 205 mm |
| Max load |
15 kg |
| Interchangeable rings |
1 x 30 mm |
| Black ring pack included |
Yes |
| Weight |
4,4 kg |
| For small speakers and studio monitors
Fine tune your sound the way it’s meant to be heard
The ISO Stands is the latest generation of IsoAcoustics stands designed for studio monitors. The ISO Stands are an updated version of the popular ISO-L8R series and features a lower profile, new frame design and a newer version of isolator for improved performance. The ISO-130 isolation stands are the smallest stands within the ISO Stands family.
Offering 14 variations of height and tilt, the ISO-130 will help you optimize the placement of your monitors and bring your tweeters to ear level. The IsoAcoustics patented isolation system provides superior isolation and decoupling from the supporting surface. The stands are biased to keep all energy in alignment with the listening position, providing greater clarity and focus.
Perfect for optimizing the placement and performance of small studio monitors…
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimize its position relative to the listener and eliminate soundwave reflections off the supporting surface. In a typical Desktop Audio Workstation (DAW) configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20″ above the work surface. Raising and tilting the monitors to the optimum position can be achieved in these circumstances using the IsoAcoustics stands.
Patented IsoAcoustics Isolation
Exciting the supporting surface
The isolators manage the energy of the speaker to reduce vibrations resonating through the supporting surface to eliminate dissonant sounds in the listening area or joining rooms.
Reducing internal reflections
Internal reflections are vibrations reflecting back up the speaker cabinet which causes smear. Smear is a result of artifacts replicated in both channels which are perceived to be in the middle, causing the stereo image to collapse. The IsoAcoustics isolators reduce internal reflections to eliminate smear. The result is an improved stereo image of natural spatial sound.
- 2 Units
- Height adjustable: 80-203 mm
- Adjustable inclination
- Allows you to adjust the speakers for an optimal dispersion pattern in the direction of the listener
- Isolates studio monitors from the supporting surface
- Dimensions per piece: 130 x 150 mm (support surface)
- Maximum load capacity: up to 9 kg
- Quantity included: 1 pair
|
Reviews
There are no reviews yet.