RADIAL DAN-RX Stereo D/A Converter

• Stereo D/A Converter
• Supports up to 24-Bit/96 kHz Resolution
• Dante-Enabled Ethernet Input
• Balanced Analog XLR Outputs
• Adjustable Output Level
• 3.5mm Stereo Headphone Output
• 14-Gauge Steel Enclosure
• Sync and Power Indicators

Apogee makes the direct connection to Pro Tools | HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD™ systems and Apogee's X-Series or Rosetta 200 converters. The result is an incredibly powerful combination of Digidesign's™Ê¼ Pro Tools software and Apogee's superior conversion and clocking hardware.

• Primary HD port for connecting directly to HD Core or Accel cards.
• Expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200)
• Compatible with the latest versions of ProTools
• May be used along side similar interfaces (such as Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8)
• Please note: Not compatible with Pro Tools|HD Native

DB25 to 8 x XLR Female. This cable allows the Apogee AP-8AD Yamaha A/D card to accept eight channels
of analog input. Also suitable for use with the AD-16 (quantity 2 required for 16 channels). The wiring is the
same as the analog input connector on a Tascam machine such as the DA-88. Alternatives are available from
Tascam, Hosa and others.

The DNRP-WRC provides two button record control and visual status indication of a connected Denon® DN-F450R/F650R recorder.

The mouse sized unit, once connecte to the recorder using its integral 5 metre lead, can be placed in a convenient location on a board/ meeting room table to allow the recording of conferences and discussions. Visual indication of recorder status is provided by high brightness red and green indicators located around the RECORD button, which show STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE. The two button control allows the recorder to be placed into record mode, create a new record mark and stop the recording process.

The DNRP-WRC is primarily for the simple control of audio recording in areas where conversations, discussions or conferences are taking place. The unit allows the DNF450R/F650R recorder to be placed out of sight to prevent media tampering or access to all the recorder controls.

• Simple unobtrusive controller for the recording of audio in board/meeting rooms
• Easy connection to Denon DN-F450R/F650R recorder serial (RS232) port
• Provides bright visual indication of STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE
• RECORD and STOP buttons allow simple control without the need to access the recorder
• Ergonomic visually pleasing design with internal weight to prevent table slip
• Ultra low power consumption, no need for additional power adaptor
• Fully sealed label provides protection against drink spills

Power and Options...
The Apogee X-Series FireWire Card gives you the power and convenience of a
direct connection to any FireWire equipped computer. The X-FireWire Card uses
an expansion slot in the ROSETTA 800 to give users of Logic, Nuendo and other
popular software the option of amazing sounding Apogee conversion. Using Apple?s
Core Audio FireWire driver for Macintosh and ASIO drivers for Windows, your
hardware options for your DAW are greatly expanded.

eXpandability...
The two ports on the Apogee X-FireWire Card allow you to daisy-chain additional
devices to create an entire system. By extending the bus, the X-FireWire card
allows for daisy-chaining of multiple Apogee systems or compatible peripherals,
and permits the use of multiple FireWire devices by computers with only one port.
The card also passes power through the FireWire ports to allow the powering of
additional devices. (Note: This feature is available for Windows systems only at this time).

Get Connected
With and X-FireWire card installed in an AD-16X, DA-16X, Rosetta 200 or Rosetta 800
you have the power of a professional FireWire connection to your favorite DAW: Logic 7,
Nuendo, Cubase, Cakewalk, Live or virtually any native audio production software.

Low Latency with FireMix
FireMix is a mixer application that allows control and creation of customizable sub-mixes
for low latency performance in the native environment. FireMix features accurate input and
output metering, 16bit fader control, and eight 48bit mix busses with enough DSP headroom
to insure that there are no compromises to the audio quality. FireMix also has customizable
pan control and key modifier user preferences to allow FireMix to operate in the same manner
as your favorite audio application. With FireMix, you will get low latency monitoring, have the
ability to save and recall all of your mixes, group and ungroup master faders all with little to no
impact on your CPU performance.

Features:
* 2, S400 FireWire connectors, allowing convenient chaining of multiple units
* Compatible with Apple's OS X built-in FireWire Core Audio driver
* Supplied with Windows XP WDM/ASIO driver
* Up to 8x8 24bit at 88.2/96k
* Up to 4x4 24-bit channels at 176.4/192KHz
* Fully compliant and compatible with 61883-6 and other relevant 1394 IEEE
  and AES specifications
* Allows low-jitter synchronization to a FireWire audio network and can provide
  a master clock source for a FireWire audio network

The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.

Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?

• USB Bus power without using unwanted AC adapter
• Works with up to 24bit/96kHz audio source
• Exclusive PLL power supply is built in to reproduce the stable electrical supply
• High quality analog headphone amp to drive any type of headphones
• Equipped with hgih-grade AKM 32bit(*) DAC AK4390
• Condensers and OP amp designed exclusively for audio products
• USB / Digital (Optical) input selector
• Headphones / RCA (Analog) output selector
• Doubles as D/D converter from USB digital audio to Optical
• An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter

Note: When using the USB input, the sampling frequency is fixed at 96kHz.  Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.

Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)

Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)

General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g