| Content |
A sensation. GLP DMXradiolink gives you the freedom of controlling any DMX device
via a wireless connection.
The DMXradioLink is similar to the DMXmagicLink. How its name already says, you will need no
conventional wired DMX circle. The DMX signal will be transmitted via radio.
With the patented compression method the original DMX signal will be very highly compressed,
and the data can be sent with 19200 baud. It can transmit up to 512 channels. The fewer channels
it has to transmit, the faster will be the transmitting rate.
Distance at sight is 100m. Indoor 30 -50 meter, depending on the walls.
Up to five radio links can be installed locally. For this purpose it needs units with different unit codes.
In addition to the use in smaller clubs and at smaller events it is very well qualified for the use in theatres,
on stages and for architectural lighting.
Technical Data:
-230V 50/60Hz; 1,5W
-868 MHz or 433 MHz / ISM band
-XLR 3 Pin in/ out
-Dimensions: 185 x 80 x 43 mm; antenna 90mm
-Weight: 0,6 kg
-2 x M10 drill holes for mounting
|
-
Product Features:
This DMX512 encoder options the advanced micro control unit, It can receive the DMX512 standard digital control signal which is internationally widely used It changes the signal into PWM control signal to actuate the LED lamp It can also connect the DMA digital console to change the light or each dynamic effect In addition, when the decoder is not connected with the DMA console, it can be used as a synchronous controller That is to say you can Synchronously control number of decoders and LED lights
Basic parameters:
Basic parameters
Product Name: DMX512 Decoder
Supply voltage: DC12-24V
Output channels: 3 channels (R, G, B, ) or 4 channels (R, G, B, W )
Output current: Max.8A Per Channel
Output Power 1:12V:<288W, 24V:<576W (3 channels)
Output Power 2:12V:<384W, 24V:<768W (4 channels)
Operating temperature: -20-60C
Controller size: L166*W67*H41(mm)
Box size: L176*W84*H50(mm)
Net weight: 360g
Gross weight: 408g
DMX512 standard: DMX512/1990
Control mode: button control, 512 console control
Accessories: A pair of XLR plugs
Package List:
1 * DMX Decoder
1 * Male and female XLR connectors
1 * User manual
|
- DMX wireless transmitter in miniature format for the wireless transmission of up to 512 DMX channels
- User friendly 3-pin XLR (male) connector with swivel antenna
- Wireless DMX eliminates the need for complex cabling between DMX controllers and DMX-controlled devices in lighting setups
- Due to GFSK modulation with 78 channels, interference-free operation is also possible alongside other QuickDMX receivers and wireless devices in the 2.4 GHz band (e.g. WLAN and Bluetooth)
- Operating range of up to 400 m
- From one up to 512 QuickDMX receivers can be operated per transmitter
- A maximum of 6 transmitters can be operated simultaneously, giving a total of 3072 DMX channels that can be controlled
- Plug & Play: Quick and easy setup with one operating button for connecting / disconnecting QuickDMX receivers
- LED function display
- Powered via included power supply
Technical specifications:
- 2.4 GHz ISM Band - No license is required and no charges are incurred when used anywhere in the world
- Power supply: 100 - 240 V AC, 50 / 60 Hz via included power supply
- Wireless transmission in the 2.4 GHz band (ISM)
- 78 Channels
- Modulation: GFSK
- Operating range: 400 m (with line-of-sight)
- DMX connector: 3-Pin XLR
- DMX channels: 1 Universe (512 channels)
- Dimensions with antenna (L x W x H): 212 x 18 x 18 mm
- Weight: 80 g
|
The Eurolite USB-DMX 512 interface combines very small dimensions with many functions due to the internal RISC-controller. This controller creates all DMX-signals so that the pc and the USB-port is not too busy enabling the parallel use of several DMX-universes.
Eurolite USB-DMX 512 Interface features:
- USB-DMX-Interface
- Interface between notebook or pc and DMX-devices
- Tested with the following DMX lighting control software: DMX-Configurator, FreeStyler, DMXControl
- Recommended system requirements: min. Pentium 3 processor 1GHz, 128 MB RAM
- Tested operating systems: Windows XP Home, Windows XP Professional, Windows Vista, Windows7
- Power supply: 5 V DC, 500 mA via USB
- Input: USB 1.1 / USB 2.0
- DMX-output: 512 channels
- DMX-512-connection: 3-pin XLR
| Standalone DMX Controller
- No computer required
- Compatible with any DMX device
- Up to 4 DMX universes (2048 channels, add-on required for U3+4)
- Up to 680 fixtures and beams
- Up to 50 fixture types
- Up to 5000 fixture properties (colour/gobo etc...)
- 8 Fixture groups
- 6 Projects
- 15000+ available fixtures (3500+ on the controller)
- DMX address
- Fixture order and group settings
- Use as DMX splitter with DMX universe mapping
- Colour FX module with 8 effect types and 16 definable colours
- Move FX module with 8 effect types
- Beam FX module with 8 effect types
- 6 Flash buttons for controlling Special FX, Strobe, Blinder, Speed, Blackout and Smoke
- Static colour palette with 10 user-defined colours per group and gradient control
- Static position palette with 5 user-defined positions per group with fade and fanning
- Gobo palette with 5 user-definable gobos per group
- 20 Nameable live edit buttons with flash trigger mode and 'park' function
- 100 Nameable presets for storing snapshots with hold and fade timings
- Preset playback cue list - all presets or per page of 20 presets
- Group and master dimming with encoder acceleration
- Group FLASH
- FULL and Blackout
- 16-Bit pan/tilt control:multi-beam LED bar control
- FX music pulse synchronisation from microphone or line-in
- FX BPM sync with Ableton Link
- OS2L or BPM Tap effect speed
- Phase, sequence, size, fade, fan and flick
- Live control of Move FX registration point
- Global FX speed and freeze control
- Map DMX IN with group dimmer and patch to output channels (add-on required)
- WLINK sync with another Wolfmix controller (add-on required)
- Fixture Builder
- Fixture calibration tool to limit the range of moving fixtures
- X-Y touch controlled positioning grid
- RGBW touch controlled colour picker
- 8-Step real-time sequencer to create beam and move FX
- Live view of DMX levels with override of default values and DMX channel tester
- Beam editor for overriding min and max values for created effects
- Calibration and RGB, white, amber, UV mixing with automatic translation of fixed colour wheel
- Automatic matching of similar gobos across different fixture types
- Time-controlled triggering of flash and preset buttons
- Fixture FLIP function for beam order reversal
- Fixture SPLIT function for splitting multi-FX bars
- Project and fixture backup with the WTOOLS app
- Offline 3D visualisation with Easy View & WTOOLS via USB (add-on required)
- Automatic restoration of the active project (no manual saving necessary)
- Import different fixture setups into the same project
Technical data:
- Housing: ABS plastic
- Powder-coated steel base plate with 100mm VESA
- Powder-coated, steel-reinforced back plate
- Screen: 4.3" colour TFT with tinted glass
- Capacitive touch
- Hardware: 220 Mhz CPU with ARM core, 8 MB RAM, 16 MB Flash
- Audio: Omnidirectional electret microphone
- 3.5 mm Jack line-in
- DMX: 2 x 3pin DMX OUT XLR connectors
- 1 x 5pin DMX OUT XLR connector
- 1 x 5pin DMX IN/OUT XLR connector with WLINK
- USB-B connector - 900ma required (USB3 rating)
- Dimensions (W x D x H): 195 x 220 x 62 mm
- Weight: 1070 g
| Compact DMX Wireless System 2.4 GHz
The Eurolite QuickDMX transmitter and receiver is used for wireless transmission of DMX512 signals. The complete technology is integrated in an extended 3-pole XLR connector (female) with a rotatable antenna.
The device is constructed as a transceiver, so it can be used as any transmitter and receiver. The use of this device eliminates the necessity of time-consuming cabling between the DMX lighting control unit and the DMX-controlled devices.
Due to the GFSK technology (Gaussian Frequency Shift Keying), interference-free operation is also possible besides other wireless Bluetooth and WiFi devices.
The range is up to 400 meters with visual contact.
Setup is very easy via Plug & Play with a button for connecting and disconnecting QuickDMX receivers.
- DMX radio receiver in miniature format for wireless transmission of up to 512 DMX channels
- User friendly 3-pin XLR connector (female) with swivel antenna
- Wireless DMX eliminates the need for complex cabling between DMX controllers and DMX-controlled devices in lighting setups
- Due to GFSK modulation with 78 channels, interference-free operation is also possible alongside other QuickDMX receivers and wireless devices in the 2.4 GHz band (e.g. WLAN and Bluetooth)
- Operating range of up to 400 m
- From one up to 512 QuickDMX receivers can be operated per transmitter
- Plug & Play: Quick and easy setup with one operating button for connecting / disconnecting QuickDMX receivers
- LED function display
- Powered via included power supply
Technical specifications:
- 2.4 GHz ISM Band - No license is required and no charges are incurred when used anywhere in the world
- Power supply: 100 - 240 V AC, 50 / 60 Hz via included power supply
- Wireless transmission in the 2.4 GHz band (ISM)
- 78 Channels
- Modulation: GFSK
- Operating range: 400 m (with line-of-sight)
- DMX connector: 3-Pin XLR (female)
- DMX channels: 1 Universe (512 channels)
- Dimensions with antenna (L x W x H): 212 x 18 x 18 mm
- Weight: 80 g
|
Reviews
There are no reviews yet.