Content | ART 310-A is a 10” reference speaker.
Thanks to its incredible amplifier’s power, the high quality neodymium transducers and very compact size cabinet, it is the ideal speaker in all the situations where the output of a PA system and the size of a monitor are important.
The 10” neodymium woofer features a 2.5” voice coil and delivers very high efficiency and controlled bass reproduction.
It can be used for live sound, playback, monitoring, corporate events and presentations.
The ART 310-A is incredibly lightweight and very easy to transport everywhere.
APPLICATIONS
- Live sound
- Playback and monitoring
- Corporate events
- AV presentations
- Fixed Installations
General Specs
• 800 Watt Peak, 400 Watt RMS, bi-amplification
• 127 dB max spl
• DSP Processing with FiRPHASE
• 10" woofer, high power 2,5" voice coil
• 1" HF neo driver, Mylar dome 1.5" voice coil
Acoustical Specs
• Frequency Response -3 dB: 50 Hz ÷ 20000 Hz
• Max SPL:127 dB
• Horizontal coverage angle:90°
• Vertical coverage angle:70°
• Compression Driver: 1“, 1.5" v.c.
• Woofer: 10“, 2.0" v.c
Inputs/Outputs
• Input signal:bal/unbal
• input connectors:xlr, jack
• Output connectors:xlr
• Input sensitivity:-2 dBu / +4 dBu
• Mic. Input Sensitivity:-32 dBu
Processor Section
Crossover frequencies:1800 Hz
Protections:Thermal, RMS
Limiter:Soft limiter
Controls:Volume, Boost, Mic/Line
Amplifier Specifications
• Total power: 800 W PEAK
• High frequencies: 200 W PEAK
• Low frequencies: 600 W PEAK
• Total power: 400 W RMS
• High frequencies: 100 W RMS
• Low frequencies: 300 W RMS
• Cooling:Convection
• Connections:VDE
Cabinet Specs
• Cabinet Material: Composite PP
• Hardware: 2xM10 flying p.
• Handles: 1 top
• Pole Mount/Cap: Yes
• Colour: Black
Size/Weight
• Height: 537 / 21.14 mm/inch
• Width: 337 / 13.26 mm/inch
• Depth: 315 / 12.40 mm/inch
• Net Weight: 12.2 / 26.9 kg/lbs |
10’’ bi-active two way plastic speaker with Media Player
- Multimedia player: Usb Flash Drive, Sd Memory Card, STEREO Bluetooth Device, Remote Control
- Woofer 10’’ VC 1,5”
- Driver 1’’ VC 1”
- Line output XLR OUT + ¼” JACK OUT
- Line input XLR IN + 2 x RCA
- Mic input XLR IN + ¼” JACK IN
- Rms power AB class 120 + 30 W
- Peak power 300W
- Frequency response 55hz-20khz
- Peak spl 125 dB
- Power supply AC110V/AC230V
|
Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.
Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.
- 2-way, bi-amplified, bass reflex design
- Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
- Digital Signal Processor with graphic display
- 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
- High efficiency switch mode power supply
- Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
- 250mm (10”) LF woofer with 50mm (2”) voice coil, custom made for FBT
- 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
- Frequency response from 58Hz to 20 kHz
- 80°H x 50°V Constant Directivity Rotatable Horn
- 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat
- Speaker stand socket, one aluminium handle
- 45° monitor taper
Code: |
40640 |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
700/200 W RMS |
Built-in amplifier peak LF/HF: |
1400/400 W |
Frequency response: |
58Hz - 20KHz -6dB |
Low Frequency woofer: |
10 - 2 coil inch |
High Frequency driver: |
1 - 1.4 coil inch |
Maximum SPL cont/peak: |
124/131 dB |
Dispersion: |
80° x 50° rotatable HxV |
Input impedance: |
22 Kohm |
AC Power requirements: |
640 VA |
Input connector: |
XLR with loop, RCA ST |
Power cord: |
5/16.4 m/ft |
Net Dimension (WxHxD): |
329x575x325 / 12.95x22.63x12.79 mm/inch |
Net Weight: |
15.6/34.39 Kg/lb |
Transport Dimension (WxHxD): |
420x675x400 / 16.53x26.57x15.74 mm/inch |
Transport Weight: |
18.1/39.90 Kg/lb |
| RCF ART 710-A MK4 ενεργό ηχείο 2-δρόμων 10" + 1“, 700Wrms
1400 WATT 2-way peak power
129 dB max spl
Innovative DSP Processing
1" Compression Driver, 1.75" v.c.
10" Woofer
90°x70°, wide dispersion constant directivity horn
FiRPHASE Technology
ART 710-A MK4 is a unique product in its category. The compression driver with custom designed dome and high power voice coil offers unique vocal clarity and sound projection. The 10” woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalisation, phase control, soft limiting and speaker protections.
APPLICATIONS
- Compact live sound reinforcement
- Portable PA
- Frontfill and sidefill
- Auditorium, Clubs, Ballroom, Corporate AV, Theatre
ΑΚΟΥΣΤΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
• Frequency Response -3 dB: 50 Hz ÷ 20000 Hz
• Max SPL: 129 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 70°
• Compression Driver: 1.0“, 1.75" v.c.
• Woofer: 10“, 2.5" v.c.
• Input signal: bal / unbal
• Input connectors: XLR, Jack
• Output connectors: XLR
• Input sensitivity: -2 dBu / +4 dBu
• Crossover frequencies: 1600 Hz
• Protections: Thermal, rms
• Limiter: Soft limiter
• Controls: Volume, Boost, Mic/Line
Total power: 1400 W PEAK
• High frequencies: 400 W PEAK
• Low frequencies: 1000 W PEAK
Total power: 700 W RMS
• High frequencies: 200 W RMS
• Low frequencies: 500 W RMS
• Cooling: Convection / foced
• Connections: VDE conncector in
• Cabinet Material: Composite PP
• Hardware: 2xM10 flying p.
• Handles: 1 top
• Pole Mount/Cap: Yes
• Colour: Black
• Height: 548 / 21.6 mm/inch
• Width: 340 / 13.3 mm/inch
• Depth: 305 / 12.0 mm/inch
• Net Weight: 14.4 / 31.75 kg/lbs |
Active 2-Way Speaker with Bluetooth Connection - Equipped with: 15" Woofer and 1" compression driver
- Frequency range [-10 dB]: 48 - 18,000 Hz
- Max SPL: 125 dB
- Dispersion pattern: 90° x 60°
- Class D (LF) + Class AB (HF)
- Power Peak (LF + HF): 400W
- Signal input: 1x Combo (XLR / Jack), Mic / Line, 1x XLR / TRS
- Signal output: 1x XLR Male (LINK / MIX)
- 3 Handles - two at the side, one at the top
- 36 mm Pole mount
- Dimensions (W x H x D): 430 x 722 x 402 mm
- Weight: 19.3 kg
- Colour: Black
- Includes softcover
| LD Systems MIX 10 A G3
Active 2-Way Loudspeaker with Integrated 7-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 10 A G3 integrates a 7-channel mixer and Class D amplification with 2 x 400 watts peak power. The compact bass reflex loudspeaker features a 10" custom woofer and 1" Celestion HF driver complement, 65 Hz to 20 kHz frequency response and 90° x 60° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels with 2-band EQ, 48 V phantom power plus switchable hi-Z input (CH1) and stereo line channel. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering and XLR monitor and subwoofer outputs. In addition, the LD MIX 10 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A speakON output allows powering the passive LD MIX 10 G3 to easily create a stereo setup.
The rigid enclosure is constructed with tough plywood featuring a 50° monitor angle and Dual-Tilt pole receptacle for 0° or 5° mounting angles. On its own or in tandem with the passive unit, the LD MIX 10 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type |
PA loudspeaker |
Type |
active |
Woofer dimensions |
10 " |
Woofer size |
254 mm |
Woofer brand |
Custom-made |
Tweeter dimensions |
1 " |
Tweeter dimensions (mm) |
25.4 mm |
Tweeter brand |
Celestion |
Dispersion (H x V) |
80 x 70 ° |
Frequency response |
65 - 20.000 Hz |
Amplifier |
Class D |
Amplifier output (RMS) |
2 x 200 W |
Amplifier output (peak) |
2 x 400 W |
Max. SPL |
124 dB |
Protection circuits |
limiter, over-current, overload, short circuit, thermal overload |
Mixer
Channels |
7 |
Mic inputs |
3 |
Mic inputs |
6.3 mm jack, XLR |
Controls for Mic Inputs |
+ 20 db switchable, DFX Send, EQ Hi, EQ Low, Hi-Z Switch (channel 1 only), level |
Line inputs |
2 |
Line input connectors |
2 x XLR, 3.5mm TRS |
Controls Line Inputs |
level |
Hi-Z inputs |
1 |
Hi-Z input connectors |
6.3 mm jack |
Input Impedance Hi-Z Input Connectors |
1000 kOhm |
Monitor Line Outputs |
2 |
Connector Type Monitor Line Output |
XLR |
Controls for Monitor Line Output |
Monitor Volume, Sub level |
Max Output Level Line Output Monitor |
17 dBu |
Record Outputs |
1 |
Increased power main output (at 4 ohm) |
200 W |
DSP Digital Effects Unit
DSP Number of Programs |
16 |
DSP Controls |
DFX Return, footswitch, Mute switch, presets |
DSP Display Elements |
Peak LED |
Main Section
Main section controls |
Balance, EQ Hi, EQ Low, EQ Mid, Master Volume, mono/stereo, Phantom Power, Power On/Off, switch operating voltage |
Main section indicators |
4-segment Level Meter, power LED |
Phantom power |
48 V |
Mains connector |
IEC socket |
Operating voltage |
SMPS |
Operating voltage |
110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, automatic switching |
Power consumption |
500 W |
Cabinet
Cabinet construction |
Bass Reflex |
Cabinet material |
16 mm Plywood |
Cabinet surface |
texture paint |
Cabinet colour |
Black |
Width |
315 mm |
Height |
489 mm |
Depth |
307 mm |
Weight |
12,3 kg |
Other features |
Bluetooth, dual-tilt flange (0°/5°), Ergonomic handle |
|
Reviews
There are no reviews yet.