| Content | Instalation Speaker pair set 100 Watt, Passive 8 inch woofer and 1inch tweeter polycarbonate, plastic case , including adjustable wall or ceiling mount , Color Black, Dimensions, : 360 x 270x240mm
feature
- Lounge Rooms
- Cafe Shop
- School
- Confernce
- Shop Center
|
The C3108 is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications.
Its compact size makes it ideal for low visibility side wall mounting.
The high-frequency section is a constant directivity horn loaded to a 1” neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is an 8” woofer with a 2” voice coil.
| Features |
|---|
| 90°x 70° CMD (Constant Matching Design) constant directivity horn | | Linear/HF boost switch | | Rotatable Horn System for horizontal cabinet mounting applications | | HF driver AMCDP (Active Mosfet Compression Driver Protection) | | LICC (Low Impedance Compensated Crossover) network | | 4 Suspension points (M10) | | Omnimount™ 75 Plate fixing positions on rear of cabinet | | 35 mm standard internal pole mount |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 60 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 100 Hz | ÷ 18 kHz | | Max SPL @ 1m: | 120 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 70° | | | Directivity index; Q: | 9.4 | | | System Sensitivity: | 94 dB | | | Nominal Impedance: | 8 Ω | | | Power Handling: | 300 Watt | | | Peak Power Handling: | 1200 Watt | | | Recommended Amplifier: | 600 | | | Protections: | Dynamic | | | Crossover frequencies: | 2100 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1" HFdriver, 1.5" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 25 Watt AES | | | Sensitivity: | 109 dB | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 200 Watts AES | | | Sensitivity: | 94 dB | |
| INPUT SECTION |
|---|
| Input connector: | Speakon NL4 | | | Output connector: | Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 10 mm birch plywood construction | | | Hardware: | 3 x M10, 4 X M5, 2 X M6 inserts | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, white, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 427 / 16.81 mm/inch | | | Width: | 242 / 9.52 mm/inch | | | Depth: | 228 / 8.98 mm/inch | | | Net Weight: | 10 / 22 Kg/Lbs |
|
Powerful monitor-speaker - Active speaker-system for direct connection with the signal source
- 2-way speaker-system
- Clear and powerful sound
- 2-band EQ master-signal and master-signal
- Wide range of uses in spite of minimum size
- Ideal for decentral sound-surroundings, e.g. in bistros, restaurants, bars or studio
- Delivery includes mounting bracket for ceiling or wall installation
Technical Information:
| Power supply: | 230 V AC, 50 Hz ~ | | Power consumption: | 125 W | | Amplifier power: | 80 W | | Components: | 8" woofer, 1 tweeter | | Inputs: | | 1 Line In | XLR | | Outputs: | | 1 Line Out | XLR | | Max. SPL: | 90 dB | | Impedance: | 8 Ohms | | Frequency-range: | 40 Hz - 20 kHz | | Dimensions (H x W x D): | 360 x 270 x 240 mm | | Weight: | 8 kg (piece) |
| The Electro-Voice ZX1i is the new standard of no compromise audio performance and versatility in an easy to install, compact sound reinforcement package.
The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small cabinet loudspeakers and enables exceptional low-frequency response without vent noise.
ZX1i installation is incredibly simple with the included QuickSAM mounting system. The QuickSAM system is a unique, integrated mounting bracket which is virtually foolproof. It allows the installer to simply snap the speaker onto the bracket, then tighten it to the desired position. For array mounting, there is an optional array bracket kit available which allows multiple units to be mounted together for a variety of configurations. |
The P4228 is a weatherproof full range, wide-dispersion, two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high frequency section is a constant directivity CMD horn loaded with a 1.4” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a double 8” woofer with a 2.5” voice coil. The cabinet is asingle piece rotational moulded in medium density polyethylene, full UV protected. The cabinet is equipped with 4 x M8 brass inserts, a stainless steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P 4228 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
| Features |
|---|
| Weatherproof cabinet IP 55 | | Aluminium grill and stainless steel bracket | | Two 8" high-output LF transducer with 2.5" voice coil | | Once RCF Precision Neodymium 1.4" Compression Driver with 2.5" voice coil | | 110° x 60° constant directivity horn | | Built in passive crossover | | 2° x 15° enclosure sides for array configurations | | Active Mosfet Compression Driver Protection | |
LICC (Low Impedance Compensated Crossover) network
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 80 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 100 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 129 dB | | | Horizontal coverage angle: | 110° | | | Vertical coverage angle: | 60° | | | Directivity index; Q: | 9 | | | System Sensitivity: | 97 dB | | | Nominal Impedance: | 8 Ω | | | Power Handling: | 400 Watt | | | Peak Power Handling: | 1600 Watt | | | Recommended Amplifier: | 800 | | | Protections: | Dinamyc | | | Crossover frequencies: | 1100 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1.4“(35.5mm) throat, 2.5" (63.7 mm) coil diaphragm assembly | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 90 Watt AES | | | Sensitivity: | 110 dB | | | Woofer: | 2x8" (200 mm) woofer with 2.5" (64 mm) coil | | | Nominal Impedence: | 16 Ω | | | Input Power Rating: | 300 Watts AES | | | Sensitivity: | 95 dB | |
| INPUT SECTION |
|---|
| Input connector: | 4 pole Amphenol | |
| CABINET |
|---|
| Cabinet Material: | 8 mm Polyethylene rotomoulded | | | Hardware: | 4 x M8 + U-bracket and pair of spacers | | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | | Colour: | Gray | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 268 / 10.55 mm/inch | | | Width: | 566 / 22.28 mm/inch | | | Depth: | 250 / 9.84 mm/inch | | | Net Weight: | 13.5 / 29.7 Kg/Lbs |
|
| Installation version with integrated surface mount bracket. The Electro-Voice® ZX1 is the new standard of no compromise audio performance and versatility for compact sound reinforcement. The high-tech enclosure uses injection-molded high-impact polypropylene to make the ZX1 extremely durable. The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low frequency response without vent noise.
The ZX1ʼs long excursion, high output 8" woofer with a weatherized treated cone delivers smooth low frequency performance with exceptional reliability. A sophisticated crossover network integrates it with the DH2005, a 1.25” voice coil titanium diaphragm true compression driver for maximum output with extended frequency response. Full-bandwidth overload protection is provided for reliable, long term operation without audible effect.
The horn features 90° x 50° coverage with the important added benefit of rotation, allowing the ZX1 to be oriented either horizontally or vertically for the ultimate in coverage flexibility. The ZX1ʼs molded polymer enclosure is inherently water resistant. The enclosure features an integrated pole mount, a pocket handle, and a wedge-angle design allowing for use as a stage monitor.
Features:
- Extremely Smooth, Wide Frequency Response
- Attractive, Clean Design with Full Grille
- EV8L 8” High-Output LF Transducer
- DH2005 1” Exit True Compression Driver
- 90° x 50° Coverage Pattern
- Rotatable Horn Design
- Integral Monitor Angle on Enclosure
- 200W Cont., 800W Peak Power Handling
- High Sensitivity, 123 dB Maximum SPL
- Integrated surface mounting bracket
Specifications:
- Sensitivity 1W/1m 94 dB
- Max. SPL / 1m (calc); full space 123 dB
- Coverage (nominal -6dB) H° 90 °
- Coverage (nominal -6dB) V° 50 °
- System Power Handling (continuous/program/peak) 200/400/800 Watts
- Nominal Impedance (Passive) 8 Ohms
- Chassis Size 8 inches
- Weight Net 8.4 kg ( 18.52 lbs )
- Dimensions (HxWxD) 451 x 282 x 263 mm (17.76" x 11.1" x 10.35“)
|
Reviews
There are no reviews yet.