REACT PA-50 Amplifier with radio 100V 60W

114.50 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Priority input  and radio 60W USB or Card reader 2 AUX in, 1 AUX out 2 mic in (1 with priority) With remote control Output 8-16Ω/70V/100V, 1 zone

 

Read more

Priority input  and radio 60W

USB or Card reader

2 AUX in, 1 AUX out

2 mic in (1 with priority)

With remote control

Output 8-16Ω/70V/100V, 1 zone

Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “REACT PA-50 Amplifier with radio 100V 60W”

Your email address will not be published. Required fields are marked *

Quick Comparison

REACT PA-50 Amplifier with radio 100V 60W removeTOA VP-200VX Power Amplifier Input Module removeINTER-M PAM-120 Mixer/Amplifier removeTOA A-2120 120 Watt Amplifier removeBITTNER AUDIO XV 200-2x100W-100V POWER AMPLIFIER removeCrown CDI-1000 2x700W-4Ω Power Amplifier remove
NameREACT PA-50 Amplifier with radio 100V 60W removeTOA VP-200VX Power Amplifier Input Module removeINTER-M PAM-120 Mixer/Amplifier removeTOA A-2120 120 Watt Amplifier removeBITTNER AUDIO XV 200-2x100W-100V POWER AMPLIFIER removeCrown CDI-1000 2x700W-4Ω Power Amplifier remove
Image
SKUREACT PA-50VP-200VXPAM-120A-2120XV200CDI-1000
Rating
Price 114.50 incl. GR VAT 39.68 incl. GR VAT 437.00 incl. GR VAT 348.00 incl. GR VAT 727.87 incl. GR VAT 1,235.00 incl. GR VAT
Stock

In stock (can be backordered)

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

AvailabilityIn stock (can be backordered)Available on backorderIn stockIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentPriority input  and radio 60W USB or Card reader 2 AUX in, 1 AUX out 2 mic in (1 with priority) With remote control Output 8-16Ω/70V/100V, 1 zone

The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with the VP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.

Specification
Power Source Supplied from VP-2064, VP-2122, VP-2241 or VP-2421
Current Consumption 30 mA or less
Power Amplifier Link RJ45 female connector for connecting the VX-200SP,
VX-200SZ Audio Output module, or SX-2100AO.
Twisted-pair straight cable (TIA/EIA-568A standard)
Finish Panel: Surface-treated steel plate
Dimensions 88 (W) × 25.8 (H) × 53.2 (D) mm
Weight 50 g
Applicable Model VP-2064, VP-2122, VP-2241, VP-2421

 

- MODULAR DESIGN

Optional modules can be installed in multiple configurations for convenience and ease of use. Choose the PAM-CDA (Compact Disc), PAM-T (AM/FM Tuner) or PAM-D (Cassette Deck) modules to expand the PAM-120A/340A/480Aʼs audio capabilities.

- INDIVIDUAL INPUT GAIN CONTROLS

Rear-panel gain controls for each input channel for total control of individual levels.

- SPEAKER SELECT

Six speaker select switches enable you to select any combination of up to five speakers.

- SELECTABLE PRIORITY MUTING

Switchable audio signal priority for Channels 1 and 2, Chime and Telephone input over other input sources.

- REMOTE CONTROL INPUT (only PAM-340A/480A)

Individual speaker zones can be selected and chime can be operated by wired remote control.

- ANNOUNCEMENT CHIME

Convenient four-tone chime for use with announcements.

- EM(EMERGENCY) - OPTIONAL EMERGENCY VOICE IC (only PAM-340A/480A)

When EM switch is pressed in emergencies, EM broadcasting stored in VOICE IC is outputted.

Rated Output Power

PAM-120A(THD 1%) : 120W (RMS)

PAM-340A(THD 3%) : 340W (RMS)

PAM-480A(THD 3%) : 480W (RMS)

Frequency Response

Amp In

80Hz~20kHz

Link In

80Hz~15kHz

CH1~CH6

120Hz~8kHz

Remote In

120Hz~8kHz(PAM-340A, PAM-480A)

T.H.D.(at 1kHz Rated Output)

Less than 1%(PAM-120A)

T.H.D.(at 1kHz Half Power Output)

Less than 0.5%(PAM-340A, PAM-480A)

S/N

Amp In

Better than 90dB(PAM-120A)

Better than 88dB(PAM-340A/480A)

Link In

Better than 65dB

CH1~CH6

Better than 50dB

Remote In

Better than 50dB(PAM-340A/480A)

Input Sensitivity/Impedance

CH1~CH6

TRIM VR -60dB Position

1mV/10kΩ

TRIM VR -16dB Position

158mV/10kΩ

Link In

100mV/10kΩ

Amp In

1V/47kΩ(PAM-120A)

1V/20kΩ(PAM-340A/480A)

Remote In

1V/10KΩ(PAM-340A/480A)

Speaker Output/Impedance

PAM-120A : 120W/4Ω, 70V/42Ω, 100V/83Ω

PAM-340A : 340W, 100V/29.4Ω

PAM-480A : 480W, 100V/20.8Ω

Preamp Output/Impedance

1V/600Ω

Tone Control (100Hz, 10kHz)

±12dB

CH1~CH6 EQ Control (100Hz, 1kHz, 10kHz)

±12dB

Power Source

100–120VAC or 220V–240VAC; 50/60Hz, 24V DC(only PAM-120A)

(Supplied AC mains transformer depends on country requirements)

Power Consumption

PAM-120A : 135W(1/8 POWER), 200W(1/3 POWER), 300W(FULL POWER)

PAM-340A : 260W(1/8 POWER), 400W(1/3 POWER), 620W(FULL POWER)

PAM-480A : 360W(1/8 POWER), 550W(1/3 POWER), 880W(FULL POWER)

Weight

PAM-120A : 13kg/28.7lb

PAM-340A : 13.5kg/29.7lb

PAM-480A : 15.5kg/34.2lb

Dimensions

420(W) x 132(H) x 360(D)mm/16.5(W) x 5.2(H) x 14.2(D)in

Operation Temperature

14F~104F (-10°C~+40°C)

※ Specifications and design subject to change without notice.

High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.

 

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 120W
Power Consumption 124W (EN60065), 260W(AC operation at rated output, 8A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:83W (100V)
LOW IMPEDANCE: 4Ω (22V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 360.3 (D) mm
Weight 10kg

 

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 200:  2x 100 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  15 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

 

Crown CDi 1000 2x700W-4Ω Power Amplifier

The Crown? CDi 1000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply.
The outputs shall be usable as dual or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items and front panel lockout.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, illuminates when a very low-level
signal is present at input.
?10 Indicator: Green LED fl ashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED fl ashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature
conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker. Dual connectors shall work with 2-8 ohm or
70V loads. Bridge-mono connectors shall work with 4-8 ohm or 140V loads.
HiQnet USB Connector: Type B, connects to a USB port on a PC.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Dual (per channel): 700W with 1% THD, 4 ohm Dual (per
channel): 500W, 8 ohm Dual (per channel) 275W, 4 ohm Bridge-Mono: 1,400W
with 1% THD, 8 ohm Bridge-Mono: 1,000W, 70V Dual (per channel): 500W.
Voltage Gain at 1kHz, 8 ohm rated output: 30.5 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity: 1.4V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 100 dB
(A weighted).
Damping Factor: Better than 500 from 20 Hz to 400 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 6.5A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
Input EQ: 6 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
Also adjustable high and low shelving fi lters. This 8-fi lter EQ section can be
bypassed.
Crossover Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24
dB per octave and Linkwitz-Riley 24/48 dB per octave. Also includes ±15 dB
bandpass gain and polarity control.
Output EQ: 8 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
This 8-fi lter EQ section can NOT be bypassed. Filters are enabled individually.
Delay: Up to 50 msec total delay per channel.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Presets: 20 presets. 19 are user-definable.
Protection shall include the following:
CDi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airfl ow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg).
The amplifier shall be designated the Crown CDi 1000.

Weight4.00 kg0.50 kg13.00 kg10.00 kg15.00 kg10.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 0.50 kg
Weight 13.00 kg
Weight 10.00 kg
Weight 15.00 kg
Weight 10.00 kg