Content |
HDMI Switch 3-1
HDMI switcher 3 into 1 out with remote HDMI switcher 3 x1 with remote control Products overview: HDMI switcher 3 into 1 out with remote control is a small high-performance HDMI switcher. Its unique design, exquisite appearance. Multi-channel input at the same time connect to multiple hd video source.
Need a power supply 5V DC 750mA (not include).
Data Transfer Speed/Rate up to 675MHz/6.75Gbps (225MHz/2.25Gbps per channel) Supported Video Formats 480i, 576i, 480p, 576p, 720p, 1080i, 1080p 3D Video Support Yes Vertical Frequency Range 60Hz Deep Color Support 36-bits total (12-bits per channel) Supported Audio Formats DTS-HD Master Audio, Dolby TrueHD, LPCM7.1, AC3, DTS, DSD
|
INPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
OUTPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
S/N RATIO: 69dB.
BANDWIDTH(-3dB): 20MHz.
POWER SOURCE: 230V AC, 50/60Hz, (115V AC, USA) 2.3VA.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT: 0.72kg (1.6lbs) approx.
ACCESSORIES: Power cord.
OPTIONS: RK-1 19” rack adapter.
|
NPUT: 1 composite video 1Vpp/75Ω on a BNC connector;1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3Vpp/75Ω on a 4-pin connector.
OUTPUTS: 1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector.
MAX. VIDEO OUTPUT: 2.5Vpp/75Ω.
VIDEO BANDWIDTH (-3dB): 10MHz (YC to CV).
DIFF. PHASE: 0.3Deg.
DIFF. GAIN: 0.36%.
K-FACTOR: 0.05% (YC to CV).
LUMA S/N RATIO: 79dB.
POWER SOURCE: 12V DC, 110mA.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT: 0.6kg (1.3lbs) approx.
ACCESSORIES: 12V DC power supply.
OPTIONS: RK-1 19” rack adapter.
|
INPUT: 1 Y/C, Y=1Vpp/75Ω, C=0.3Vpp/75Ω on a 4-pin connector.
OUTPUT: 3 Y/C, Y=1Vpp/75Ωs, C=0.3Vpp/75Ω, on 4-pin connectors.
BANDWIDTH (-3dB): 420MHz (Y).
MAX. OUTPUT LEVEL: 2.6Vpp/75Ω (Y).
DIFF. GAIN: 0.05%.
DIFF. PHASE: 0.03Deg.
K-FACTOR: |
INPUTS: 8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS: 8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION: 10-bit or 8-bit, automatic according to input resolution.
SWITCHING: During vertical interval from analog sync.
STANDARDS: 4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION: Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS: 22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY: Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE: Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 3.5kg (7.8lbs) approx.
ACCESSORIES: Power cord.
|
INPUTS: 1 composite video, 1Vpp/75Ω, on a BNC connector. 1 audio, 1mV-2V/33k. on an RCA connector
OUTPUT: 1 balanced, 150Ω on a 6/4 standard telephone socket.
BANDWIDTH (PAIR): Video: 58MHz; Audio: 30kHz at 30 meters without lightening arrestors
NON-LINEARITY (PAIR): Less 0.2% at short distances
DIFF. GAIN (PAIR): 0.41%.
DIFF. PHASE (PAIR): 0.3 Deg.
K-FACTOR (@ 20m, PAIR): 0.1%.
S/N RATIO (PAIR): 72 dB.
CONTROLS: Video Gain: -1.8 /+ 2.3dB, EQ above 2.5 MHz 0 / 16dB, Audio: 0 / 52dB. 707: Condenser Mic Power. 708: loop termination, signal invert.
POWER SOURCE: 12 VDC 40mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
WEIGHT: 0.28 kg. (0.62 lbs.) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: Model VA-50P power supply with six 12VDC outlets. RK-T1, RK-T3, 19” rack adapters
|
Reviews
There are no reviews yet.