REALSAFE HDV-301N HDMI Switch Splitter, 3 In 1 Out

HDMI Switch 3-1

HDMI switcher 3 into 1 out with remote HDMI switcher 3 x1 with remote control
Products overview:
HDMI switcher 3 into 1 out with remote control is a small high-performance HDMI switcher. Its unique design, exquisite appearance. Multi-channel input at the same time connect to multiple hd video source.

Need a power supply 5V DC 750mA (not include).

Data Transfer Speed/Rate     up to 675MHz/6.75Gbps (225MHz/2.25Gbps per channel)
Supported Video Formats     480i, 576i, 480p, 576p, 720p, 1080i, 1080p
3D Video Support     Yes
Vertical Frequency Range     60Hz
Deep Color Support     36-bits total (12-bits per channel)
Supported Audio Formats     DTS-HD Master Audio, Dolby TrueHD, LPCM7.1, AC3, DTS, DSD

INPUTS:    8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS:    8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION:    10-bit or 8-bit, automatic according to input resolution.
SWITCHING:    During vertical interval from analog sync.
STANDARDS:    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION:    Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS:    22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY:    Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE:    Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS:    19" x 7" x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.

Input     Twisted Pair Signal, balanced @ 150 ohms, RJ-11 Standard Telephone Connector
Output     Composite Video, 1 Vpp @ 75 ohms, on a BNC connector
Unbalanced Audio, 1 Vpp @ 33K ohms, mic or line level, on an RCA connector
Video Bandwidth     58 MHz
Video Signal-to-Noise Ratio     72 dB
Differential Phase     0.03°
Differential Gain     0.41%
Video Controls     Power On/Off
Internal Gain and HF
Mic or Line Level
Dimensions (WxDxH)     4.7 x 2.95 x 0.98“
12 x 7.5 x 2.5cm
Weight     0.62 lbs
0.28 kg
Power Source     12 VDC on an AC Power Adapter

INPUT:    1 composite video 1Vpp/75Ω on a BNC connector. 1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3 Vpp/75Ω on a 4-pin connector.
Outputs:    1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector; 1 composite video 1 Vpp/75Ω on a BNC connector.
VIDEO BANDWIDTH (-3dB):    100 MHz. (YC to CV), 5.8 MHz. (CV to YC, PAL).
DIFF GAIN:    0.7% (YC to CV,NTSC).
DIFF. PHASE:    0.15 Deg. (YC to CV, NTSC).
K-FACTOR:    0.05% (YC to CV), 0.5% (CV to YC, NTSC).
LUMA S/N RATIO:    72 dB in both direction, (PAL).
CONTROL:    Two electronic touch switches to select PAL or NTSC operation.
POWER SOURCE:    12V DC, 200mA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.64kg (1.4lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19” rack adapter.

INPUT:    2 composite video, 1Vpp/75Ω on BNC connectors.
OUTPUT:    2 composite video, 1Vpp/75Ω on BNC connectors.
BANDWIDTH (-3dB):    20MHz.
S/N RATIO:    69dB.
POWER SOURCE:    230V AC, 50/60Hz, (115V AC, USA) 2.3VA.
DIMENSIONS:    22cm x 18cm x 4.5cm (8.7” x 7” x 1.7”) W, D, H.
WEIGHT:    1.3kg (2.9lbs) approx.
ACCESSORIES:    Power cord.
OPTIONS:    RK-1 19” rack adapter.

INPUT:    1 RF, 0.5Vpp/75Ω (max.) on an "F” type connector.
OUTPUTS:    4 RF, 0.5Vpp/75Ω (max.) on "F” type connectors.
BANDWIDTH:    40MHz to 3000MHz (+/-3dB).
COUPLING:    AC.
RF GAIN:    +6dB typical across band.
NOISE FIGURE:    3.5dB.
POWER SOURCE:    12V DC, 80mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.32kg (0.71lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.