Content |
HDMI Switch 3-1
HDMI switcher 3 into 1 out with remote HDMI switcher 3 x1 with remote control Products overview: HDMI switcher 3 into 1 out with remote control is a small high-performance HDMI switcher. Its unique design, exquisite appearance. Multi-channel input at the same time connect to multiple hd video source.
Need a power supply 5V DC 750mA (not include).
Data Transfer Speed/Rate up to 675MHz/6.75Gbps (225MHz/2.25Gbps per channel) Supported Video Formats 480i, 576i, 480p, 576p, 720p, 1080i, 1080p 3D Video Support Yes Vertical Frequency Range 60Hz Deep Color Support 36-bits total (12-bits per channel) Supported Audio Formats DTS-HD Master Audio, Dolby TrueHD, LPCM7.1, AC3, DTS, DSD
|
Input SMPTE 259M serial video, 75Ohm on BNC connectors.
Serial Outputs 8 reclocked SMPTE 259M outputs, 75Ohm on BNC connectors, adjustable amplitude.
Parallel Output ECL level outputs on a 25-pin D-sub (F) connector.
Video Resolution 10-bit or 8-bit, automatic according to input resolution.
Standards 4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
Equalization Automatic for up to >30dB cable loss.
Power Source 100-240V AC, 50/60Hz, 14VA.
Dimensions 19" x 7" x 1U W, D, H, rack mountable.
Weight 2.5kg (5.5lbs) approx.
Accessories Power cord.
|
INPUT: 1 composite video 1Vpp/75Ω on a BNC connector. 1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3 Vpp/75Ω on a 4-pin connector.
Outputs: 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector; 1 composite video 1 Vpp/75Ω on a BNC connector.
VIDEO BANDWIDTH (-3dB): 100 MHz. (YC to CV), 5.8 MHz. (CV to YC, PAL).
DIFF GAIN: 0.7% (YC to CV,NTSC).
DIFF. PHASE: 0.15 Deg. (YC to CV, NTSC).
K-FACTOR: 0.05% (YC to CV), 0.5% (CV to YC, NTSC).
LUMA S/N RATIO: 72 dB in both direction, (PAL).
CONTROL: Two electronic touch switches to select PAL or NTSC operation.
POWER SOURCE: 12V DC, 200mA.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT: 0.64kg (1.4lbs) approx.
ACCESSORIES: 12V DC power supply.
OPTIONS: RK-1 19” rack adapter.
|
INPUT: 1 RF, 0.5Vpp/75Ω (max.) on an "F” type connector.
OUTPUTS: 4 RF, 0.5Vpp/75Ω (max.) on "F” type connectors.
BANDWIDTH: 40MHz to 3000MHz (+/-3dB).
COUPLING: AC.
RF GAIN: +6dB typical across band.
NOISE FIGURE: 3.5dB.
POWER SOURCE: 12V DC, 80mA.
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT: 0.32kg (0.71lbs) approx.
ACCESSORIES: Power supply, mounting bracket.
OPTIONS: RK-3T 19" rack adapter.
|
COMPOSITE & AUDIO COMBINER ON SINGLE COAX The VA-11 is a high performance combiner of composite video and unbalanced stereo audio signals. It combines the composite video and stereo audio into a single signal which allows the use of a single coax cable, which can then separates it back into composite video and stereo audio when used with the VA-12 separator.
* Bandwidth - 7MHz (- 3dB).
* Inputs - 1 composite video and 1 unbalanced stereo audio.
* Outputs - 1 single signal of the combined audio and composite video.
* Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-50RN.
INPUTS:1 composite video, 1Vpp/75? on a BNC type connector.1 stereo audio, 1Vpp/10k? on RCA connectors.OUTPUT:1 mixed signal 1Vpp/75? on a BNC connector.BANDWIDTH (-3dB):7 MHz.DIFF. GAIN:0.4 %.DIFF. PHASE:0.17 Deg.VIDEO S/N RATIO:72 dB.POWER SOURCE:230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.1 VA.DIMENSIONS:16.5cm x 12cm x 4.5cm (6.5' x 4.7' x 1.8', W, D, H.).WEIGHT:0.78 kg. (1.7 lbs.) approx.ACCESSORIES:Power cord.OPTIONS:RK-50RN 19' rack adapter.
|
Input Composite video, 1Vpp/75? on a BNC connector.
Output Optic Fiber ST connector.
Operation Distance Up to 5km (MultiMode).
Video Bandwidth (-3Db) 55 MHz. 20 MHz.
Diff. Gain 0.4%.
Video S/N Ratio 60 dB.
Non-Linearity 0.6%
Power Source 12 VDC 80mA.
Dimensions 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
Weight 0.27 kg. (0.59 lbs.) approx.
Accessories Power supply, mounting bracket.
Options RK-T1, RK-T3, 19” rack adapters.
|
Reviews
There are no reviews yet.