REALSAFE HDV-301N HDMI Switch Splitter, 3 In 1 Out

HDMI Switch 3-1

HDMI switcher 3 into 1 out with remote HDMI switcher 3 x1 with remote control
Products overview:
HDMI switcher 3 into 1 out with remote control is a small high-performance HDMI switcher. Its unique design, exquisite appearance. Multi-channel input at the same time connect to multiple hd video source.

Need a power supply 5V DC 750mA (not include).

Data Transfer Speed/Rate     up to 675MHz/6.75Gbps (225MHz/2.25Gbps per channel)
Supported Video Formats     480i, 576i, 480p, 576p, 720p, 1080i, 1080p
3D Video Support     Yes
Vertical Frequency Range     60Hz
Deep Color Support     36-bits total (12-bits per channel)
Supported Audio Formats     DTS-HD Master Audio, Dolby TrueHD, LPCM7.1, AC3, DTS, DSD

Input    Composite video, 1Vpp/75? on a BNC connector.
Output    Optic Fiber ST connector.
Operation Distance    Up to 5km (MultiMode).
Video Bandwidth (-3Db)    55 MHz. 20 MHz.
Diff. Gain    0.4%.
Video S/N Ratio    60 dB.
Non-Linearity    0.6%
Power Source    12 VDC 80mA.
Dimensions     12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
Weight     0.27 kg. (0.59 lbs.) approx.
Accessories    Power supply, mounting bracket.
Options    RK-T1, RK-T3, 19” rack adapters.

Input     Twisted Pair Signal, balanced @ 150 ohms, RJ-11 Standard Telephone Connector
Output     Composite Video, 1 Vpp @ 75 ohms, on a BNC connector
Unbalanced Audio, 1 Vpp @ 33K ohms, mic or line level, on an RCA connector
Video Bandwidth     58 MHz
Video Signal-to-Noise Ratio     72 dB
Differential Phase     0.03°
Differential Gain     0.41%
Video Controls     Power On/Off
Internal Gain and HF
Mic or Line Level
Dimensions (WxDxH)     4.7 x 2.95 x 0.98“
12 x 7.5 x 2.5cm
Weight     0.62 lbs
0.28 kg
Power Source     12 VDC on an AC Power Adapter

INPUT:    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUTS:    2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2 composite video, 1Vpp/75Ω on BNC connectors.
MAX. OUTPUT LEVEL:    1.4Vpp.
VIDEO BANDWIDTH (-3dB):    160MHz (Y).
NON-LINEARITY:    0.05%.
DIFF. GAIN:    0.08%.
DIFF. PHASE:    0.08Deg.
K-FACTOR:    0.1%.
VIDEO S/N RATIO:    Better than 80dB (Y channel).
POWER SOURCE:    12V DC, 60mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19” rack adapter.

COMPOSITE & AUDIO COMBINER ON SINGLE COAX The VA-11 is a high performance combiner of composite video and unbalanced stereo audio signals. It combines the composite video and stereo audio into a single signal which allows the use of a single coax cable, which can then separates it back into composite video and stereo audio when used with the VA-12 separator.

    * Bandwidth - 7MHz (- 3dB).
    * Inputs - 1 composite video and 1 unbalanced stereo audio.
    * Outputs - 1 single signal of the combined audio and composite video.
    * Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-50RN.

INPUTS:1 composite video, 1Vpp/75? on a BNC type connector.1 stereo audio, 1Vpp/10k? on RCA connectors.OUTPUT:1 mixed signal 1Vpp/75? on a BNC connector.BANDWIDTH (-3dB):7 MHz.DIFF. GAIN:0.4 %.DIFF. PHASE:0.17 Deg.VIDEO S/N RATIO:72 dB.POWER SOURCE:230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.1 VA.DIMENSIONS:16.5cm x 12cm x 4.5cm (6.5' x 4.7' x 1.8', W, D, H.).WEIGHT:0.78 kg. (1.7 lbs.) approx.ACCESSORIES:Power cord.OPTIONS:RK-50RN 19' rack adapter.

INPUTS:    8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS:    8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION:    10-bit or 8-bit, automatic according to input resolution.
SWITCHING:    During vertical interval from analog sync.
STANDARDS:    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION:    Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS:    22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY:    Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE:    Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS:    19" x 7" x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.