Content | 3 pole TINY xlr male cable connector, black metal shell, gold plated contacts, bulk packaging available (*-D)
Easy to assemble
Robust metal housing with best flex relief
Shielded system – high noise immunity and EMI protection
Intuitive and rugged locking mechanism provides secure locking system
Millionfond proven chuck type strain relief – up to 4.00 mm cable diameter
Keyed insert and strain relief to avoid mispositioning / rotation of insert respectively cable
Product
Title RT3MC-B
Gender Male
Electrical
Contact resistance < 10 mΩ
Dielectric strength > 0.5 kVdc
Insulation resistance > 1 GΩ
Rated current per contact< 5 A
Mechanical
Cable O.D. 2.0 – 4.0 mm
Lifetime > 5000 mating cycles
Wiresize 0.22 mm²
Wiresize 24 AWG
Wiring Solder contacts
Material
Bushing ABS / TPU
Contact plating Au
Contacts Bronze (CuSn6)
Insert PA 6.6 30 % GF
ShellZinc diecast (ZnAl4Cu1)
Shell plating Black
Strain relief POM
Environmental
Solderability Complies with IEC 68-2-20
Temperature range -30 °C to +85 °C
|
The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use. Suitable for male chassis connectors. |
Female heavy duty, metal boot with rubber jacket, water protected, IP65.
Electrical Specifications:
* Number of contacts: 5 * Contact resistance: = 3 m ohm * Insulation resistance, initial: > 2 G ohm; after damp heat test: > 1 G ohm * Dielectric strength: 1500 V dc * Rated current: 7.5 A * AWG: 2.5 mm²/14 AWG * Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles * Insertion / withdrawal force: = 20 N * Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating * Shell (male): stainless steel and zinc diecasting combined. * Insert: PA 6.6 30% GR (glass reinforced) * Contacts: CuSn6 * Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard alloy over 2 ?m Ni * Latch lock (female): St3K32 * Strain-relief clamp: POM * Antikink bushing: PUR * Sealing jacket: EPDM
Environmental Specifications:
* Temperature range: -30° C to + 80° C * Flammability: UL 94HB * Solderability: complies with IEC 68-2-20 * Protection class: IP 65 * Compatibility: IEC 61076-2-103 standard
| This series has become the accepted worldwide standard for XLR cable connectors.
The compact design offers the shortest XLR cable version in the industry. The female
features an insert that's completely surrounded by metal for added protection and the
shell has a rubber ring for secure mating to a male XLR or microphone. Assembly is
quick and easy with no screws to worry about and includes the unique Neutrik chuck
type strain relief. |
Male, heavy duty version with metal boot and stainless steel shell.
Electrical Specifications:
* Number of contacts: 4 * Contact resistance: = 3 m ohm * Insulation resistance, initial: > 2 G ohm; after damp heat test: > 1 G ohm * Dielectric strength: 1500 V dc * Rated current: 10 A * AWG: 2.5 mm²/14 AWG * Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles * Insertion / withdrawal force: = 20 N * Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating * Shell (male): stainless steel and zinc diecasting combined. * Insert: PA 6.6 30% GR (glass reinforced) * Contacts: CuZn39Pb3 * Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard alloy over 2 ?m Ni * Strain-relief clamp: POM * Antikink bushing: PUR * Sealing jacket: EPDM | XLR Cable Connectors / FXS Type
FX connector with noiseless ON-OFF switch short-circuiting contacts 2+3.
For use with a microphone without switch.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
Reviews
There are no reviews yet.