REGA BIAS 2 Dual Magnet (MM) Cartridge

110.00 incl. GR VAT

Only 2 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedures are focused on one simple goal; extracting as much music from your vinyl as possible. Each one uses a pair of parallel wound coils which are then carefully assembled on […]

 

Read more

Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedures are focused on one simple goal; extracting as much music from your vinyl as possible.

Each one uses a pair of parallel wound coils which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable.

The multi award winning Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance putting you in touch with your vinyl collection like never before.

A hand built, moving magnet cartridge in our custom designed body.

  • Output: 6.8 – 7.2mV
  • Stylus: Elliptical
  • Fixing: Standard, two screws
  • Coils: High spec parallel wound coils
  • Colour: Red
  • Tracking Pressure 1.75g
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “REGA BIAS 2 Dual Magnet (MM) Cartridge”

Your email address will not be published. Required fields are marked *

Quick Comparison

REGA BIAS 2 Dual Magnet (MM) Cartridge removeNUMARK CC-1 PROFESSIONAL DJ CARTRIDGE removeORTOFON 2M Blue CARTRIDGE removeORTOFON CONCORDE DIGITRACK CARTRIDGE removeORTOFON CONCORDE S-120 Set Head with needle removeORTOFON OM S-120 Set Head with needle remove
NameREGA BIAS 2 Dual Magnet (MM) Cartridge removeNUMARK CC-1 PROFESSIONAL DJ CARTRIDGE removeORTOFON 2M Blue CARTRIDGE removeORTOFON CONCORDE DIGITRACK CARTRIDGE removeORTOFON CONCORDE S-120 Set Head with needle removeORTOFON OM S-120 Set Head with needle remove
Image
SKUBIAS 2H99NU000072MBLUeCONCORDEDIGITRACKConcorde S-120 SetOM S-120 Set
Rating
Price110.00 incl. GR VAT 79.00 incl. GR VAT 208.25 incl. GR VAT116.98 incl. GR VAT160.00 incl. GR VAT102.98 incl. GR VAT
Stock

Only 2 left in stock (can be backordered)

In stock

Only 1 left in stock (can be backordered)

In stock

In stock

In stock

AvailabilityOnly 2 left in stock (can be backordered)In stockOnly 1 left in stock (can be backordered)In stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentEach one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedures are focused on one simple goal; extracting as much music from your vinyl as possible. Each one uses a pair of parallel wound coils which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable. The multi award winning Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance putting you in touch with your vinyl collection like never before. A hand built, moving magnet cartridge in our custom designed body.
  • Output: 6.8 - 7.2mV
  • Stylus: Elliptical
  • Fixing: Standard, two screws
  • Coils: High spec parallel wound coils
  • Colour: Red
  • Tracking Pressure 1.75g

NUMARK'S ALL–AROUND CHAMP, FOR DURABILITY AND RELIABILITY

    * Frequency response: 20 to 22,000Hz
    * Output: 6mV
    * Channel separation nominal: 28dB
    * DC resistance: 430 ohms/ch
    * Inductance: 400mH/ch
    * Weight: 18.0g
    * Channel balance: within 1.5dB
    * Tracking force: 3–6g
    * Recommended load: 47K ohms 200pf
    * Stylus tip: fine circular diamond
    * Application: high versatility and skip resistance

The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge.  Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Blue uses an improved engine, which provides an increased output of 5.5mV.  
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5,5 mV
Channel balance at 1 kHz 1,5 dB
Channel separation at 1 kHz 25 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 + 2 / - 1 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Nude Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,6-2,0g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,3 kOhm
Internal inductance 700 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Blue
Cartridge weight  7,2 g
Replacement stylus unit 2M Blue
 

The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM).  With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.   DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

 

Output voltage at 1000Hz, 5cm/sec.

8 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

22 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-18.000 Hz -3dB/-2 dB

Tracking ability at 315 Hz at recommmende tracking force

90 μm

Compliance, dynamic lateral

12 μm/m N

Stylus type

Spherical

Stylus tip radius

--

Tracking force range

2,0-4,0 g (20-40 mN)

Tracking force recommended

3,0 g (30 mN)

Tracking angle

-

Internal impedance, DC resistance

-

Internal inductance

-

Recommended load resistance

-

Recommended load capacitance

-

Cartridge weight

18,5 g

Replacement stylus unit

Digitrak
A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm! The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance. An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level. Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions. In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.
Output voltage at 1000Hz, 5cm/sec. 10 mV
Channel balance at 1kHz 1,5 dB
Channel separation at 1kHz 20 dB
Channel separation at 15 kHz 15 dB
Frequency range at -3dB 20-18.000 Hz
Frequency response 20-18.000 Hz +3/- 2dB
FIM distortion at recomm. tracking force DIN 45.542
Tracking ability at 315 Hz at recomm. tracking force 120 μm
Compliance, dynamic lateral 11 μm/m N
Stylus type Spherical
Stylus tip radius R 18 μm
Tracking force range 1,5-10,0 g (15-100 mN)
Tracking force recommended 4,0 g (40 mN)
Internal impedance, DC resistance 1680 Ohm
Internal inductance 920 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 200-600 pF
Cartridge weight 18,5 g
Replacement stylus unit Ortofon-Serato S-120

A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm!

The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance.

An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level. 

Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions. 

In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.

Output voltage at 1000Hz, 5cm/sec. 

10 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

20 dB

Channel separation at 15 kHz 

15 dB

Frequency range at -3dB

20-18.000 Hz

Frequency response

20-18.000 Hz +3/- 2dB

FIM distortion at recommended tracking force DIN 45.542

Tracking ability at 315 Hz at recommended tracking force  

120 μm

Compliance, dynamic lateral 

11 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

1,5-10,0 g (15-100 mN)

Tracking force recommended

4,0 g (40 mN)

Internal impedance, DC resistance

1680 Ohm

Internal inductance

920 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-600 pF

Cartridge weight

5 g

Replacement stylus unit

Ortofon-Serato S-120

 

Weight0.10 kg0.18 kg0.70 kg0.18 kg0.10 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.18 kg
Weight 0.70 kg
Weight 0.18 kg
Weight 0.10 kg
Weight 0.10 kg