Content | Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedures are focused on one simple goal; extracting as much music from your vinyl as possible.
Each one uses a pair of parallel wound coils which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable.
The multi award winning Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance putting you in touch with your vinyl collection like never before.
A hand built, moving magnet cartridge in our custom designed body.
- Output: 6.8 - 7.2mV
- Stylus: Elliptical
- Fixing: Standard, two screws
- Coils: High spec parallel wound coils
- Colour: Red
- Tracking Pressure 1.75g
| A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm!
The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance.
An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level.
Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions.
In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.
Output voltage at 1000Hz, 5cm/sec. |
10 mV |
Channel balance at 1kHz |
1,5 dB |
Channel separation at 1kHz |
20 dB |
Channel separation at 15 kHz |
15 dB |
Frequency range at -3dB |
20-18.000 Hz |
Frequency response |
20-18.000 Hz +3/- 2dB |
FIM distortion at recomm. tracking force DIN 45.542 |
|
Tracking ability at 315 Hz at recomm. tracking force |
120 μm |
Compliance, dynamic lateral |
11 μm/m N |
Stylus type |
Spherical |
Stylus tip radius |
R 18 μm |
Tracking force range |
1,5-10,0 g (15-100 mN) |
Tracking force recommended |
4,0 g (40 mN) |
Internal impedance, DC resistance |
1680 Ohm |
Internal inductance |
920 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-600 pF |
Cartridge weight |
18,5 g |
Replacement stylus unit |
Ortofon-Serato S-120 |
|
Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.
ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI
Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.
With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.
Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.
TECHNICAL DATA CONCORDE DIGITRACK
Output voltage at 1000 Hz, 5cm/sec. 8 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 22 dB Channel separation at 15 kHz 15 dB Frequency range 20-20.000 Hz Frequency response 20-18.000 Hz -3 /- 2dB FIM distortion at recommended tracking force, DIN 45.542 < 1% Tracking ability at 315Hz at recommended tracking force 80 m Compliance, dynamic, lateral 12 m/mN Stylus type Spherical Stylus tip radius R18 Equivalent stylus tip mass 0,6 mg Tracking force range 2-4 g (20-40 mN) Tracking force, recommended 3,0 g (30 mN) Tracking angle 20 Internal impedance, DC resistance 1325 Ohm Internal inductance 765 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge colour, body/stylus Red/Red Cartridge weight 18,5 g Replacement stylus unit Digitrack |
The versatile M92E fits both of the major types of tone-arm mounts in use today. This high-value model offers faithful sound reproduction at a very attractive price. A natural bi-radial diamond tip teamed with a tubular aluminum alloy stylus cantilever accurately traces the grooves of your records for a difference you can hear. Fits both of the major types of tonearm mounts in use today, making it compatible with over 85% of turntables. Biradial Diamond Tip + Tubular Aluminum Alloy Stylus Cantilever. Accurately traces the grooves of your records for smooth sound throughout the frequency range. Universal mount Biradial diamond tip Tubular aluminum alloy stylus cantilever Standard mount adapter Mounting hardware Stylus guard Low Tracking Force Minimizes wear on your irreplaceable vinyl collection
Shure M92E Excellent high-value cartridge with smooth sound. Fits turntables with P-mount tone arms or standard ½ inch mount tone arms.
- Type: MM
- Fixing: P-mount
- Output voltage: 5,0mV bei 1kHz, 5cm/sec.
- Amplifier-connection: Phono MM
- Frequency range: 20-18.000Hz
- Material: diamond, bonded
- Stylus type: elliptical 0.4 x 0.7 mil
- Tracking force range: 0,75-1,5g
- Tracking force, recommended: 1,25g
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-300pF
- Weight: 7,3g*
|
Type: MC-type
Playback frequency range: 15-50,000Hz
Output voltage: 0.3mV (1kHz and 3.54cm/sec.)
Channel separation: 30dB (1kHz)
Output balance: 0.5dB (1kHz)
Stylus pressure: 1.8-2.2g (2.0g standard)
Coil impedance: 10O (1kHz)
DC resistance: 10O
Load resistance: More than 100O (when head amp connected)
Coil inductance: 22µH (1kHz)
Static compliance: 40×10-6cm/dyne
Dynamic compliance: 10×10-6cm/dyne (100Hz)
Stylus needle shape: Oval (0.3×0.7mil)
Cantilever: Duralumin tapered pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1
|
The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile. The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges. The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.
Technical data | | Output voltage at 1000 Hz, 5cm/sec. | 3,3 mV | Channel balance at 1 kHz | | Channel separation at 1 kHz | > 22 dB | Channel separation at 15 kHz | > 15 dB | Frequency range at - 3dB | 20-25.000 Hz | Frequency response FIM distortion at recommended | 20-20.000 Hz + 4 / - 1 dB | Tracking ability at 315Hz at recommended tracking force *) | > 65 µm | Compliance, dynamic, lateral | 13 µm/mN | Stylus type | Elliptical | Stylus tip radius | r/R 8/18 µm | Tracking force range | 1,8-2,2 g (18-22 mN) | Tracking force, recommended | 2 g (20 mN) | Tracking angle | 20° | Internal impedance, DC resistance | 100 Ohm | Recommended load impedance | 47 kOhm / | Cartridge body material | Noryl | Cartridge colour | Black | Cartridge weight | 4,1 g |
|
Reviews
There are no reviews yet.