REGA Carbon Cartridge Dual Magnet (MM)

59.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The Rega Carbon is a high quality, moving magnet pick-up cartridge designed to be simple to set up, easy to install and above all, accurately reproduce music. Supplied as standard on the multi award winning RP1 turntable, the Carbon performs far beyond its budget price tag. Output: 2.5mV at 1kHz Stylus: User replaceable. Fixing: Standard, two screws […]

 

Read more

The Rega Carbon is a high quality, moving magnet pick-up cartridge designed to be simple to set up, easy to install and above all, accurately reproduce music.

Supplied as standard on the multi award winning RP1 turntable, the Carbon performs far beyond its budget price tag.

  • Output: 2.5mV at 1kHz
  • Stylus: User replaceable.
  • Fixing: Standard, two screws
  • Cantilever: Carbon
  • Colour: Black/White
  • Tracking Pressure 2-3g
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “REGA Carbon Cartridge Dual Magnet (MM)”

Your email address will not be published. Required fields are marked *

Quick Comparison

REGA Carbon Cartridge Dual Magnet (MM) removeORTOFON OM 5E CARTRIDGE removeORTOFON CONCORDE DIGITRACK Twin removeSHURE M44-7DJ Scratch Spherical turntable head/needle system removeORTOFON 2M Bronze Cartridge removeORTOFON Concorde Scratch TWIN CARTRIDGE remove
NameREGA Carbon Cartridge Dual Magnet (MM) removeORTOFON OM 5E CARTRIDGE removeORTOFON CONCORDE DIGITRACK Twin removeSHURE M44-7DJ Scratch Spherical turntable head/needle system removeORTOFON 2M Bronze Cartridge removeORTOFON Concorde Scratch TWIN CARTRIDGE remove
Image
SKUCARBONOM5ECONCORDE DIGITRACKTwinM4472MBRONZEConcordeScratchTWIN
Rating
Price 59.00 incl. GR VAT 74.34 incl. GR VAT223.00 incl. GR VAT372.00 incl. GR VAT345.00 incl. GR VAT204.00 incl. GR VAT
Stock

In stock

Only 2 left in stock (can be backordered)

In stock

Only 2 left in stock

In stock

In stock

AvailabilityIn stockOnly 2 left in stock (can be backordered)In stockOnly 2 left in stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe Rega Carbon is a high quality, moving magnet pick-up cartridge designed to be simple to set up, easy to install and above all, accurately reproduce music. Supplied as standard on the multi award winning RP1 turntable, the Carbon performs far beyond its budget price tag.
  • Output: 2.5mV at 1kHz
  • Stylus: User replaceable.
  • Fixing: Standard, two screws
  • Cantilever: Carbon
  • Colour: Black/White
  • Tracking Pressure 2-3g
The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 4 mV
Channel balance at 1 kHz 2 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 Hz ± 2 dB
Tracking ability at 315Hz at recommended tracking force *) 65 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,5-2,0 g (15-20 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Internal impedance, DC resistance 750 Ohm
Internal inductance 450 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 200-600 pF
Cartridge colour, body/stylus Black/Black
Cartridge weight 5 g
Replacement stylus unit Stylus 5 E
*) Typical value

Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.

ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI

Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.

With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.

Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.

TECHNICAL DATA CONCORDE DIGITRACK

Output voltage at 1000 Hz,
5cm/sec.
8 mV
Channel balance at 1 kHz
1,5 dB
Channel separation at 1 kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range
20-20.000 Hz
Frequency response
20-18.000 Hz -3 /- 2dB
FIM distortion at recommended tracking force,
DIN 45.542
< 1%
Tracking ability at 315Hz at
recommended tracking force
80 m
Compliance, dynamic, lateral
12 m/mN
Stylus type
Spherical
Stylus tip radius
R18
Equivalent stylus tip mass
0,6 mg
Tracking force range
2-4 g (20-40 mN)
Tracking force, recommended
3,0 g (30 mN)
Tracking angle
20
Internal impedance, DC resistance
1325 Ohm
Internal inductance
765 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge colour, body/stylus
Red/Red
Cartridge weight
18,5 g
Replacement stylus unit
Digitrack

M44-7 Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide.  Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
  • Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
  • With a 9.5 mV output, the M44-7 produces powerful, resonant sound.
  • Skip Resistance: ultra high
  • Output: ultra high
  • Record Wear: ultra low
  • Sound Emphasis: big bass
  Tone Arm MountStandard 1/2 inch Cartridge TypeMoving Magnet Output VoltageTypical at 1 kHz9.5 mV RMS at 5 cm/sec peak velocity Recommended Load47 kilohms in parallel with 450pf Tracking ForceEffective at stylus tipRange: 1.5 to 3 grams Stylus CantileverShure Type SHeat-treated aluminum alloy / tubular1.6 mil wall thickness / 34.5 mil diameter Diamond Stylus TipPolished natural gemstone: SphericalRadius: 0.7 mil Frequency ResponseEssentially flat from 20 to 20,000 Hz Stereo Channel BalanceWithin 2 dB Channel SeparationTypical at 1 kHz: 20 dB Net Weight6.7 grams Height15.9 mm Accessories IncludedAttached flip-down Stylus GuardHeadshell Screwdriver (Phillips)Extra Set of 4 Headshell Wires (4-99)Stylus Cleaning BrushHeadshell Weight (3 grams)User GuideMounting hardwareStylus guard Replacement NeedlesSingle with box & User Guide N44-74 Pack mounted on a card N44-7Q12 Pack mounted on a card N44-7Z Made In Mexico

2M Bronze - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 

2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.

The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. 

The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications.  The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners.  Additionally, its larger footprint ensures reduced distortion and record wear.

The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances.  The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. 


TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5 mV
Channel balance at 1 kHz 1 dB
Channel separation at 1 kHz 26 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-29.000 Hz
Frequency response 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 22 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Tracking force range 1,4-1,7g (14-17 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,2 kOhm
Internal inductance 630 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Bronze
Cartridge weight  7,2 g
Replacement stylus unit 2M Bronze

For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforeced rubber suspension, DJs don't need to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.


This Ortofon Concorde Set contains;
- 2x Ortofon Concorde Scratch Element
- Ortofon Needle Brush
- All parts come in a special Ortofon box casing

Features:

  • Output Voltage at 1000Hz, 5cm/sec. : 7mV
  • Channel Balance at 1 Khz : 1,5dB
  • Channel Seperation at 1 Khz : 25dB
  • Channel Seperation at 15 Khz : 15dB
  • Frequency Range at 3db : 20-20.000Hz
  • Stylus Type : Spherical
  • Internal Impedance : 750 Ohm
  • Tracking Force recommended : 4,0G(40mN)
  • Cardridge Weight : 18,5 gram
  • Replacement Stylus Unit : Scratch

  • Weight0.10 kg0.05 kg0.50 kg0.5 kg0.70 kg0.50 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.10 kg
    Weight 0.05 kg
    Weight 0.50 kg
    Weight 0.5 kg
    Weight 0.70 kg
    Weight 0.50 kg