Content |
Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedure are focused on one simple goal, extracting as much music from your vinyl as possible.
Each one uses a pair of parallel wound coils, which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable.
The multi award winning, Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance putting you in touch with your vinyl collection like never before.
A multi award winning, hand built moving magnet cartridge with three point mounting system.
- Output: 6.8 - 7.2mV
- Stylus: Elliptical
- Fixing: Rega three point fixing
- Coils: High Spec parallel wound coils
- Colour: Blue
- Tracking Pressure 1.75g
|
The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well. DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.
Output voltage at 1000Hz, 5cm/sec.
|
8 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
22 dB
|
Channel separation at 15 kHz
|
15 dB
|
Frequency range at -3dB
|
20-20.000 Hz
|
Frequency response
|
20-18.000 Hz -3dB/-2 dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
|
Compliance, dynamic lateral
|
12 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
--
|
Tracking force range
|
2,0-4,0 g (20-40 mN)
|
Tracking force recommended
|
3,0 g (30 mN)
|
Tracking angle
|
-
|
Internal impedance, DC resistance
|
-
|
Internal inductance
|
-
|
Recommended load resistance
|
-
|
Recommended load capacitance
| - |
Cartridge weight
| 18,5 g
|
Replacement stylus unit
| Digitrak |
|
The versatile M92E fits both of the major types of tone-arm mounts in use today. This high-value model offers faithful sound reproduction at a very attractive price. A natural bi-radial diamond tip teamed with a tubular aluminum alloy stylus cantilever accurately traces the grooves of your records for a difference you can hear. Fits both of the major types of tonearm mounts in use today, making it compatible with over 85% of turntables. Biradial Diamond Tip + Tubular Aluminum Alloy Stylus Cantilever. Accurately traces the grooves of your records for smooth sound throughout the frequency range. Universal mount Biradial diamond tip Tubular aluminum alloy stylus cantilever Standard mount adapter Mounting hardware Stylus guard Low Tracking Force Minimizes wear on your irreplaceable vinyl collection
Shure M92E Excellent high-value cartridge with smooth sound. Fits turntables with P-mount tone arms or standard ½ inch mount tone arms.
- Type: MM
- Fixing: P-mount
- Output voltage: 5,0mV bei 1kHz, 5cm/sec.
- Amplifier-connection: Phono MM
- Frequency range: 20-18.000Hz
- Material: diamond, bonded
- Stylus type: elliptical 0.4 x 0.7 mil
- Tracking force range: 0,75-1,5g
- Tracking force, recommended: 1,25g
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-300pF
- Weight: 7,3g*
|
The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond. The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models. The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.
Technical data | | Output voltage at 1000 Hz, 5cm/sec. | 3,3 mV | Channel balance at 1 kHz | | Channel separation at 1 kHz | > 24 dB | Channel separation at 15 kHz | >15 dB | Frequency range at - 3dB | 20-30.000 Hz | Frequency response FIM distortion at recommended | 20-20.000 Hz + 4 / - 1 dB | Tracking ability at 315Hz at recommended tracking force *) | > 70 µm | Compliance, dynamic, lateral | 13 µm/mN | Stylus type | Nude Fine Line | Stylus tip radius | r/R 8/40 µm | Tracking force range | 1,8-2,2 g (18-22 mN) | Tracking force, recommended | 2 g (20 mN) | Tracking angle | 20° | Internal impedance, DC resistance | 100 Ohm | Recommended load impedance | 47 kOhm / | Cartridge body material | Noryl | Cartridge colour | Black | Cartridge weight | 4,1 g |
|
Features
• 1 System
• 1 Replacement Stylus
• Small brush
• Inside a velvet-case
Technical Data
Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
Frequency response: 20-15.000 Hz +3 / -2 dB
Stylus type: Spherical
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Cartridge weight: 5 g |
The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile. The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges. The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.
Technical data | | Output voltage at 1000 Hz, 5cm/sec. | 3,3 mV | Channel balance at 1 kHz | | Channel separation at 1 kHz | > 22 dB | Channel separation at 15 kHz | > 15 dB | Frequency range at - 3dB | 20-25.000 Hz | Frequency response FIM distortion at recommended | 20-20.000 Hz + 4 / - 1 dB | Tracking ability at 315Hz at recommended tracking force *) | > 65 µm | Compliance, dynamic, lateral | 13 µm/mN | Stylus type | Elliptical | Stylus tip radius | r/R 8/18 µm | Tracking force range | 1,8-2,2 g (18-22 mN) | Tracking force, recommended | 2 g (20 mN) | Tracking angle | 20° | Internal impedance, DC resistance | 100 Ohm | Recommended load impedance | 47 kOhm / | Cartridge body material | Noryl | Cartridge colour | Black | Cartridge weight | 4,1 g |
|
Reviews
There are no reviews yet.